cruise control Citroen C5 2009.5 (RD/TD) / 2.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2009.5, Model line: C5, Model: Citroen C5 2009.5 (RD/TD) / 2.GPages: 314, PDF Size: 19.25 MB
Page 5 of 314
8
F A M I L I A R I S A T I O N
D A S H B O A R D
1. Electric windows/door mirrors/child safety controls.
2. Storing driver’s seat and door mirror settings.
3. Audio/telematic steering mounted controls.
4. H o r n .
5. Steering mounted controls:
- Speed limiter
- Cruise control
6. D r i v e r ’ s a i r b a g .
7. Navigation controls for the audio/telematics and
trip computer systems.
8. D r i v e r ’ s a i r v e n t .
9. Instrument panel.
10. D r i v e r ’ s a i r v e n t .
11. L i g h t i n g / D i r e c t i o n i n d i c a t o r s / F o g l a m p / V o i c e
recognition control stalk.
12. Manual headlamp height adjustment.
13. Steering wheel adjustment.
14. Knee airbag.
15. Locking/unlocking of doors and boot.
16. Checks/Anti-intrusion alarm/Parking space sensor
controls.
17. Ignition switch.
18. Windscreen wiper/screen wash control stalk.
19. Oddments tray or programmable heater controls.
20. U S B p o r t .
Page 7 of 314
10
F A M I L I A R I S A T I O N
D A S H B O A R D
Audio.
Instrument panel menu.
Multifunction screen menu.
Telephone.
Cruise control and
speed limiter.
The " SET +, PAUSE, VOL+, MUTE "
b u t t o n s h a v e t o u c h i d e n t i fi c a t i o n t o
make them easier to use.
Activation of voice
recognition or reminder
of navigation guidance. M O D E : s e l e c t i o n o f t h e t y p e
of information displayed on multifunction screen.
138
Page 12 of 314
15
F A M I L I A R I S A T I O N
M O N I T O R I N G
Instrument panel T h e h a z a r d w a r n i n g l a m p s
can also be used with the
ignition switched off.
A. Fuel gauge and low fuel warning lamp.
B. Cruise control/speed limiter information.
C. Coolant temperature.
D. Speedometer.
E. Instrument panel.
F. Mileage recorder.
G. Trip mileage recorder reset button.
H. Rev counter.
I. Engine oil temperature.
J. D i s p l a y o f a u t o m a t i c g e a r b o x i n f o r m a t i o n .
- W h e n t h e i g n i t i o n i s s w i t c h e d o n , t h e o r a n g e a n d red warning lamps light up.
- W h e n t h e e n g i n e i s r u n n i n g , t h e s e w a r n i n g l a m p s should go out .
- I f a n y w a r n i n g l a m p s r e m a i n o n , r e f e r t o t h e "Monitoring" section.
Hazard warning lamps
22
111
Page 16 of 314
19
F A M I L I A R I S A T I O N
This system allows you to maintain a
constant vehicle speed programmed by
the driver.
Cruise control
Speed limiter This system allows you to choose a maximum
speed that you do not wish to exceed.
The chosen speed must be
higher
than 20 mph (30 km/h) . Cruise control is active on the
higher
gears of the gearbox. The chosen
speed must be higher than 25 mph
(40 km/h).
Instrument panel display
The speed limiter or cruise control
mode is displayed on the instrument
panel when selected.
Cruise control
Speed limiter
Selection of
"LIMIT":
Activation of speed limiter
mode.
"SET +" : Increase of the
maximum speed.
"SET -": Reduction of
the maximum speed.
Suspension or resumption of
mode.
D e a c t i v a t i o n .
The chosen speed is
memorised.
"SET": Memorisation
of the speed (system
paused).
Selection of "
CRUISE: "
Activation of cruise control
mode.
"SET +" : Increase of
the memorised speed
(system ON).
"SET -" : Reduction of the
memorised speed (system
ON).
Suspension or resumption of
mode.
D e a c t i v a t i o n .
D R I V I N G
140 142
Page 156 of 314
IX
138
D R I V I N G
FIXED CENTRED CONTROLS STEERING WHEEL
1 Rotation
- S c r o l l t h e v a r i o u s p a g e s o f i n f o r m a t i o n o n t h
e i n s t r u m e n t p a n e l s c r e e n .
- Move through the various menus on the instrume nt panel screen.
- Increase/decrease values.
S h o r t p r e s s - Open the menu on the instrument panel screen (only when stationary).
- S e l e c t a n d c o n fi r m i n f o r m a t i o n.
Long press Trip computer zero reset (if the trip computer page is displayed).
2 S h o r t p r e s s
-
Cancel the current operation. - Return to the previous screen on the instrument panel screen.
Long press Return to the initial page on the instrument panel screen
.
3 S h o r t p r e s s Increase the speed in steps of 1 mph (1 km/h)/stor
ing the speed.
Maintained press Increase the speed in steps of 5 mph (5 km/h).
4 S h o r t p r e s s Decrease the speed in steps of 1 mph (1 km/h)/stor
ing the speed.
Maintained press Decrease the speed in steps of 5 mph (5 km/h).
5 S h o r t p r e s s S u s p e n d o r r e s u m e c r u i s e c o n t r o l / s p e e d l i m i t e r ( d e p e n d i n g o n t h e m o d e
selected).
6 S h o r t p r e s s S e l e c t c r u i s e c o n t r o l o r s p e e d l i m i t e r m o d e ( t h e c y c l e o n t h i s b u t t o n w i l l
always begin with selection of the speed limiter).
7 S h o r t p r e s s Deactivate cruise control/speed limiter.
8 S h o r t p r e s s
- Pick up an incoming call.
- Hang up the current call.
- Open the telephone short-cut menu.
- C o n fi r m o n t h e l i s t a n d t h e t e l e p h o n e m e n u .
Long press Refuse an incoming call.
9 S h o r t p r e s s / L o n g p r e s s Horn.
10 S h o r t p r e s s Activate/deactivate Black Panel mode (night drivin g).
11 S h o r t p r e s s Activate the voice command.
Long press Navigation instruction repeat.
Page 160 of 314
IX
142
D R I V I N G
CRUISE CONTROL
S y s t e m w h i c h a u t o m a t i c a l l y m a i n -
tains the vehicle speed programmed
by the driver, without any action on
the accelerator pedal.
The cruise control is switched on
manually: the vehicle speed must be
at least 25 mph (40 km/h) and you
must be in at least:
- 4th gear for manual gearboxes,
- 2nd gear for automatic gearboxes. Displays on the instrument
panel
The programmed information is
grouped together in zone
A of the
instrument panel.
Programming
Press button 4 to select cruise
control mode "
CRUISE
" .
Steering mounted controls
The cruise control switches are lo-
cated on the left-hand side of the
steering wheel. T h e s e l e c t i o n i s c o n fi r m e d b y t h e
display of the function in zone
A of
the instrument panel.
When the function is selected, no
cruising speed has yet been
memorised. Once the desired speed has been
reached using the accelerator, press
button
1 or button 2 . The cruising
speed is then memorised and cruise
control is activated. The cruising
speed is displayed in zone A of the
instrument panel, and "ON" is dis-
played.
Adjustment of the memorised
speed while cruise control is
in operation
You can adjust the memorised
speed, displayed in zone A , by
pressing:
- Button 1 to increase the speed.
- Button 2 to reduce the speed.
S u c c e s s i v e p r e s s e s w i l l m o d i f y t h e
cruise speed in steps of 1 mph and a
continuous press in steps of 5 mph.
You can then release the accelera-
tor pedal. The vehicle will automati-
cally keep to the speed chosen.
The vehicle speed may vary slightly
from that memorised.
If during cruise control the system
cannot keep to the cruise speed
(e.g. on a steep descent), then the
s p e e d fl a s h e s . I f n e c e s s a r y , b r a k e t o
curb your speed.
Page 161 of 314
IX
!
143
D R I V I N G
Cruise control must only be
u s e d w h e r e t h e t r a f fi c c o n d i -
tions permit driving at a con-
stant speed.
Do not use it on congested roads
or when the weather or the road
conditions are poor.
The driver must remain attentive
and in complete control of the ve-
hicle.
You are recommended to keep your feet within range of the pedals.
Overriding the programmed
speed
While cruise control is in operation,
it is always possible to go above the
programmed speed simply by pres-
sing the accelerator pedal (for ex-
ample to overtake another vehicle).
The speed displayed in zone A
fl a s h e s .
You only have to release the ac-
celerator pedal to return to the pro-
grammed speed.
Suspension/Resumption
Either by pressing the brake
pedal or the clutch pedal.
Or by pressing button 3 .
O r b y t h e E S P o r A S R s y s t e m s
being active.
For vehicles with a manual gearbox,
cruise control is deactivated if the
gear lever is in neutral. Reactivation
-
By recalling the memorised
speed
After deactivation, press button 3 .
Your vehicle automatically returns
to the memorised cruising speed.
The memorised speed and "ON"
are displayed in zone A .
If the memorised cruising speed is higher than the current speed,
the vehicle will accelerate strong-ly to reach the current speed.
- By selecting the current speed
Press button 1 or 2 once the de-
sired speed has been reached.
The new speed and "ON" will
appear in zone A .
Return to normal driving
Either press on button 5 .
Or select the cruise control func-
tion.
Or stop the engine.
The speed that was chosen is no
longer memorised.
"PAUSE" will be displayed in zone A
of the instrument panel.
These actions do not cancel the
cruising speed which remains dis-
played on the instrument panel. Operating fault
If there is a malfunction, a mes-
sage is displayed accompanied by
an audible signal and lighting of the
SERVICE warning lamp.
Have it checked by a CITROËN
dealer.