navigation Citroen C5 2012 (RD/TD) / 2.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2012, Model line: C5, Model: Citroen C5 2012 (RD/TD) / 2.GPages: 316, PDF Size: 9.75 MB
Page 10 of 316
8
FAMILIARISATION
INSTRUMENTS AND CONTROLS
1.
Electric windows/door mirrors/child safety
controls.
2.
Storing driver’s seat and door mirror settings.
3.
Audio/telematic steering mounted controls.
4.
Horn.
5.
Steering mounted controls:
- Speed limiter
- Cruise control
6.
Driver's airbag.
7.
Navigation controls for the audio/telematic and
trip computer systems.
8.
Driver's air vent.
9.
Instrument panel.
10.
Driver's air vent.
11 .
Stop & Start switch.
12.
Lighting/Direction indicators/Foglamp/Voice
recognition control stalk.
13.
Manual headlamp height adjustment.
14.
Steering wheel adjustment.
15.
Knee airbag.
16.
Locking/unlocking of doors and boot.
17.
Checks/Anti-intrusion alarm/Parking space
sensor controls.
18.
Ignition switch.
19.
Windscreen wiper/screenwash control stalk.
20.
Oddments tray or programmable heater
controls.
21.
USB port.
Page 12 of 316
10
FAMILIARISATION
INSTRUMENTS AND CONTROLS
Audio. Instrument panel menu. Multifunction screen menu.
Telephone. Cruise control and speed
limiter.
The " SET +, PAUSE, VOL+,
and MUTE
"
buttons have touch identifi cation to make
them easier to use. Activation of voice
recognition or reminder of
navigation guidance. MODE: selection of the type
of information displayed in
the multifunction screen.
148-149
Page 28 of 316
I
26
MONITORING
INSTRUMENT PANELS - PETROL AND DIESEL - MANUAL AND AUTOMATIC GEARBOX
Panel grouping together the dials and vehicle operation indicator and warning lamps.
A.
Fuel gauge
B.
Indicator:
●
Coolant temperature
●
Cruise control/Speed limiter
information
C.
Speedometer
D.
Rev counter
E.
Indicator:
●
Engine oil temperature
●
Gear lever position and gear
engaged (Automatic gearbox)
F.
Controls:
●
Lighting dimmer
●
Resetting to zero of trip mile-
age computer and mainte-
nance indicator
G.
Instrument panel screen indicating:
●
Depending on the page
selected with the left-hand
thumb wheel on the steering
wheel:
- Digital speed repeater
- Trip computer
- Navigation (guidance) infor-
mation
- Display of message alerts
- Engine oil level check
- Service indicator
●
Permanently:
- Trip mileage recorder
- Total mileage recorder
Page 33 of 316
I
31
MONITORING
Return to the main instrument
panel screen display
Successive rotations of the left-hand
thumb wheel on the steering wheel
allow you to return to the main instru-
ment panel screen display (vehicle
speed), via the navigation informa-
tion screen, then the screen display-
ing only the total mileage and the trip
mileage (bottom of screen).
Display of navigation
information on instrument
panel screen
You can display navigation informa-
tion on the instrument panel screen
by rotating the left-hand thumb wheel
on the steering wheel.
Log of alerts
This function allows you to display
the log of alerts.
)
Press on button A
.
The following messages appear con-
secutively on the instrument panel
screen:
- Tyre pressure check.
- Service indicator reminder.
- Display of message alerts.
- Oil level check.
Page 47 of 316
II
!
45
MULTIFUNCTION SCREENS
COLOUR SCREEN(WITH eMyWay)
Displays in the screen
Depending on the context, it displays:
- time,
- date,
- altitude,
- ambient temperature (the value
displayed fl ashes if there is a risk
of ice),
- parking sensor information,
- audio functions,
- telephone information and con-
tacts,
- satellite navigation system infor-
mation,
- alert messages,
- settings menus for the screen,
navigation system and vehicle
equipment.
Controls
From the eMyWay control panel, to
select one of the applications:
)
press the dedicated "RADIO"
,
"MUSIC"
, "NAV"
, "TRAFFIC"
,
"SETUP"
or "PHONE"
button
for access to the corresponding
menu,
)
turn dial A
to select a function,
an item in a list,
)
press button B
to confi rm the se-
lection,
or
)
press the "ESC"
button to aban-
don the current operation and re-
turn to the previous display.
For more information on these
applications, refer to the "Audio
Equipment" section.
"SETUP" menu
)
Press the "SETUP"
button to
gain access to the confi guration
settings menu:
- "Display confi guration",
- "Speech synthesis setting",
- "Select language",
- "Defi ne vehicle parameters",
- "Alert log".
For safety reasons, confi gu-
ration of the multifunction
screen by the driver must be only
done when stationary.
Page 48 of 316
II
46
MULTIFUNCTION SCREENS
Defi ne vehicle parameters *
This menu allows you to activate or
deactivate certain driving and com-
fort systems, listed by category:
- Parking help
- Screen wiper functions
●
Engage rear wiper when in re-
verse (Rear wiper coupled to
reverse; see "Visibility"),
-
Confi gure lighting (see "Visibility"):
●
Duration of guide-me-home
lighting,
●
Directional headlamps function,
●
Daytime running lamps function ** .
Alert log
It lists the active alerts by displaying
the various associated messages in
turn.
Select language
This menu allows you to select the
language used by the screen display:
(Français, English, Italien, Portugais,
Espagnol, Allemand, Néerlandais,
Turc, Polonais, Russe).
Display confi guration
This menu allows you to choose a
colour scheme for the screen, adjust
the brightness, set the date and time
and choose the units for distance
(km or miles), fuel consumption
(l/100 km, mpg or km/l) and tempe-
rature (°Celsius or °Fahrenheit).
Speech synthesis setting
This menu allows you to set the volume
for navigation instructions and to chooses
the type of voice (male or female).
When setting the time, you can
choose to "Synchronise minutes
with GPS"
, so that the minutes
are set automatically by satellite
reception.
* Depending on country.
** Depending on country of sale.
Page 150 of 316
IX
148
DRIVING
FIXED CENTRED CONTROLS STEERING WHEEL
1
Rotation
-
Scroll the various pages of information on the instrument panel
screen.
- Move through the various menus on the instrument panel screen.
- Increase/decrease values.
Short press
- Open the menu on the instrument panel screen (only when stationary).
- Select and confi rm information.
Long press Trip computer zero reset (if the trip computer page is
displayed).
2
Short press
- Cancel the current operation.
-
Return to the previous screen on the instrument panel screen.
Long press Return to the initial page on the instrument panel screen.
3
Short press
Increase the speed in steps of 1 mph (1 km/h) / storing the speed.
Maintained press Increase the speed in steps of 5 mph (5 km/h).
4
Short press
Decrease the speed in steps of 1 mph (1 km/h) / storing the speed.
Maintained press Decrease the speed in steps of 5 mph (5 km/h).
5
Short press Suspend or resume cruise control/speed limiter (depending
on the mode selected).
6
Short press Select cruise control or speed limiter mode (the cycle on this
button will always begin with selection of the speed limiter).
7
Short press Deactivate cruise control/speed limiter.
8
Short press
- Pick up an incoming call.
- Hang up the current call.
- Open the telephone short-cut menu.
- Confi rm on the list and the telephone menu.
Long press Refuse an incoming call.
9
Short press / Long press Horn.
10
Short press Activate/deactivate Black Panel mode (night driving).
11
Short press Activate the voice command.
Long press Navigation instruction repeat.
Page 160 of 316
IX
158
DRIVING
Reactivation
In bad weather or in winter, ensure
that the sensors are not covered
with mud, ice or snow. When re-
verse gear is engaged, an audible
signal (long beep) indicates that the
sensors may be dirty.
When the speed of the vehicle is
below about 6 mph (10 km/h), some
sources of noise (motorcycle, lorry,
pneumatic drill, ...) may trigger the
audible parking sensor signals.
)
Press button A
again, the warning
lamp switches off, the system is
reactivated.
REVERSING CAMERA (TOURER)
A reversing camera is activated au-
tomatically when reverse gear is en-
gaged.
The colour image is provided in the
navigation screen.
The space between the blue lines
represents the width of your vehicle
except for the door mirrors.
The blue lines represent the general
direction of the vehicle.
The red lines represent a distance
of about 30 cm beyond the edge
of your vehicle's rear bumper. The
audible signal becomes continuous
from this limit.
The green lines represent distances
of about 1 and 2 metres beyond the
edge of your vehicle's rear bumper.
Clean the reversing camera regu-
larly using a sponge and a soft
cloth.
Page 199 of 316
XI
!
197
PRACTICAL INFORMATION
Starting using another
battery
)
Lift the pins to remove the front
left headlamp cover (V6 HDi en-
gine).
)
Connect the red cable to the
positive terminal (+) of the fl at
battery A
, then to the positive ter-
minal (+) of the slave battery B
.
)
Connect one end of the green or
black cable to the negative ter-
minal (-) of the slave battery B
.
V6 HDi engine: the positive ter-
minal (-) is located under the red
cover.
)
Connect the other end of the green
or black cable to the earth point C
on the broken down vehicle.
)
Operate the starter, let the en-
gine run.
)
Wait until the engine returns to
idle and disconnect the cables.
Charging the battery using a
battery charger
The batteries contain harmful
substances such as sulphuric
acid and lead. They must be
disposed of in accordance with
regulations and must not, in any
circumstances, be discarded with
household waste.
Take used remote control batteries
and vehicle batteries to an autho-
rised collection point.
It is advisable to disconnect the
battery if the vehicle is to be left un-
used for more than one month.
Do not disconnect the terminals
while the engine is running.
Do not charge the batteries without
disconnecting the terminals fi rst.
Do not touch the clips during the
operation.
Do not lean over the batteries.
Disconnect the cables in the re-
verse order to connection, ensur-
ing that they do not touch.
Before disconnecting the battery
Wait 2 minutes after switching off
the ignition before disconnecting
the battery.
Close the windows and the doors
before disconnecting the battery.
Following reconnection of the
battery
Following reconnection of the bat-
tery, switch on the ignition and wait
1 minute before starting to permit
initialisation of the electronic sys-
tems. However, if slight malfunctions
remain following this operation, con-
tact a CITROËN dealer or a qualifi ed
workshop.
Referring to the corresponding sec-
tion, you must yourself reinitialise:
- the remote control key,
- the glass panoramic roof blind,
-
the GPS satellite navigation system.
)
Disconnect the battery from the
vehicle.
)
Follow the instructions for use
provided by the manufacturer of
the charger.
)
Reconnect starting with the neg-
ative terminal (-).
)
Check that the terminals and
connectors are clean. If they are
covered with sulphate (whitish or
greenish deposit), remove them
and clean them.
Do not disconnect the battery to
charge it.
Page 208 of 316
XI
!
206
PRACTICAL INFORMATION
The fi tting of electrical equip-
ment or accessories which
are not recommended by
CITROËN may result in a failure of
your vehicle's electronic system and
excessive electrical consumption.
Please note this precaution. You
are advised to contact a CITROËN
representative to be shown the
range of recommended equipment
and accessories.
Depending on the legislation in
force in the country, it may be com-
pulsory to have a high visibility
safety vest, warning triangle and
spare bulbs and fuses available in
the vehicle.
Installation of radio
communication transmitters
Before installing any after-market ra-
dio communication transmitter, you
can contact a CITROËN dealer for
the specifi cation of transmitters which
can be fi tted (frequency, maximum
power, aerial position, specifi c instal-
lation requirements), in line with the
Vehicle Electromagnetic Compatibility
Directive (2004/104/EC).
"Multimedia":
Wi-Fi on board, 230V socket, audio
systems, speakers, semi-integral
navigation systems, portable navi-
gation systems, hands-free kit, DVD
player, USB Box, mapping update
CD, driving aid, Hi-Fi module...