wheel size Citroen C5 2017 (RD/TD) / 2.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2017, Model line: C5, Model: Citroen C5 2017 (RD/TD) / 2.GPages: 348, PDF Size: 10.72 MB
Page 67 of 348

65
C5_en_Chap03_ergonomie-et-confort_ed01-2016
Steering wheel adjustment
F First, adjust the driver's seat to the most suitable position.
F
W
hen stationary , lower the lever A to
release the steering wheel adjustment.
F
A
djust for height and reach.
F
R
aise the lever to lock the steering wheel
adjustment.
The steering wheel can be adjusted for height and reach to adapt the driving position to the size of
the driver.
Adjustment
As a safety precaution, these
operations must only be carried out
while the vehicle is stationary.
After locking, if you press firmly on the
steering wheel, a slight click may be
heard.
3
Ease of use and comfort
Page 180 of 348

178
C5_en_Chap07_info-pratiques_ed01-2016
Snow chains
In wintry conditions, snow chains improve traction as well as the behaviour of the vehicle when braking.The snow chains must be fitted only
to the front wheels. They must never
be fitted to "space-saver" type spare
wheels.
Take account of the legislation in force
in your country on the use of snow
chains and the maximum running speed
authorised.Avoid driving with snow chains on roads
that have been cleared of snow, to
avoid damaging your vehicle's tyres and
the road sur face. If your vehicle is fitted
with alloy wheels, check that no part of
the chain or its fixings is in contact with
the wheel rim.
Advice on installation
F If you have to fit the chains during a
journey, stop the vehicle on a flat sur face
on the side of the road.
F
A
pply the parking brake and position any
wheel chocks to prevent movement of your
vehicle.
F
F
it the chains following the instructions
provided by the manufacturer.
F
M
ove off gently and drive for a few
moments, without exceeding 30 mph
(50
km/h).
F
S
top your vehicle and check that the snow
chains are correctly tightened.
Use only the chains designed to be fitted to the
type of wheel fitted to your vehicle:
Original tyre size Chain specification
225/60 V16 Maximum link size:
9 mm
225/55 W17
245/45 W18 These tyres cannot
be fitted with chains
245/40 Y19
For more information on snow chains, contact a
CITROËN dealer or a qualified workshop. It is strongly recommended that before
you leave, you practise fitting the snow
chains on a level and dry sur face.
Practical information
Page 213 of 348

211
C5_en_Chap08_en-cas-de-panne_ed01-2016
Changing a wheel
Access to the tools
For vehicles supplied with a standard spare
wheel (same size as the four wheels), the tools
are stowed in a carrier, located in the spare
wheel.
F
R
elease the retaining strap for access to it.
List of tools
All of these tools are specific to your vehicle
and may vary according to equipment. Do not
use them for any other purpose. 1.
W
heelbrace. U
sed for removing the wheel trim and the
wheel fixing bolts.
2.
J
ack with integral handle.
U
sed to raise the vehicle.
3.
B
olt head finisher tool.
U
sed to remove the wheel bolt protectors
(finishers) on wheel bolts with alloy wheels.
4.
Wh
eel chock*.
5.
T
owing eye.
Do not use:
-
t
he jack for any purpose other than
lifting the vehicle,
-
a d
ifferent jack from the one
supplied with the vehicle.
If the vehicle does not have its original
jack, contact a CITROËN dealer or a
qualified workshop to obtain the one
listed by the manufacturer. For more information on Towing the
vehicle
, refer to the corresponding
section.
* Depending on country of sale.
For vehicles supplied with a "space-saver"
type spare wheel
, the tools are stowed in a
storage well, located below the spare wheel.
F
U
nscrew the central yellow screw and
remove the wheel for access to it.
8
In the event of a breakdown
Page 219 of 348

217
C5_en_Chap08_en-cas-de-panne_ed01-2016
If your vehicle is fitted with a spare
wheel of a different size to those on the
vehicle, you must not exceed 50 mph
(80 km/h) whilst using the spare wheel.
The wheel bolts are specific to the type
of wheel.
If the type of wheel is changed,
check with your CITROËN dealer or a
qualified workshop that the wheel bolts
are compatible with the new wheels.
Take care to note down the code
number engraved on the head of the
security bolt socket. This will enable
you to obtain a replacement security
bolt socket from your dealer.
F
T
ighten the security bolt using
wheelbrace
1 fitted with the security bolt
socket (depending on equipment).
F
T
ighten the other bolts using just the
wheelbrace 1 .
F
R
efit the protectors on the bolts (depending
on equipment).
F
S
tow the tools in the carrier box.
F
R
eturn the suspension to the normal
position.
F
C
heck that the tyre pressure is correct and
have the balancing checked.Tyre under-inflation detection
The space-saver type or steel spare
wheel does not have a sensor.
The punctured wheel must be repaired
by a CITROËN dealer or a qualified
workshop.
8
In the event of a breakdown
Page 251 of 348

249
C5_en_Chap09_caracteristiques-techniques_ed01-2016
Identification markings
Various visible markings for identification of the vehicle.
Refer also to the registration document for your vehicle for the vehicle type, serial number, weights...
All genuine CITROËN replacement parts are available exclusively within the dealer network.
For your safety and in order to remain within the terms of the warranty, you are advised to use only
CITROËN replacement parts.D. T
yre / paint label A
ffixed to the left-hand centre door pillar, it
bears the following information:
-
T
yre pressures, laden and unladen.
-
T
yre sizes (including the load index and
speed rating).
-
T
yre pressure for the spare wheel.
-
P
aint colour code.
Observe the tyre pressures indicated by
CITROËN.
Check the tyre pressures at least
monthly, when cold.
A.
M
anufacturer's label
-
G
ross train weight (GTW).
-
M
aximum weight on front axle.
-
M
aximum weight on rear axle.
B.
V
ehicle Identification Number (VIN)
under the bonnet
C.
V
ehicle Identification Number (VIN) at
the bottom of the windscreen aper ture Low tyre pressures increase the fuel
consumption of your vehicle.
A
ffixed to the left-hand centre door pillar, it
bears the following information:
-
M
anufacturer's name.
-
E
U type approval number.
-
V
ehicle Identification Number (VIN).
-
G
ross vehicle weight (GV W). The original tyres fitted to the vehicle
may have a load index or speed rating
higher than those given on the label;
this has no effect on the inflation
pressures.
9
Technical data