parking sensors CITROEN C5 2021 Owners Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2021, Model line: C5, Model: CITROEN C5 2021Pages: 228, PDF Size: 6.78 MB
Page 5 of 228

3
Contents
Highway Driver Assist 2.0  111
Adaptive cruise control  11 2
Lane positioning assist  11 6
Speed adjustment during cornering  11 9
Semi-automatic lane changing  120
Active Safety Brake with Collision Risk Alert and 
Intelligent emergency braking assistance 
 124
Distraction detection  128
Active lane departure warning system  129
Long-distance blind spot monitoring  131
Parking sensors  132
Top Rear Vision  134
Top 360 Vision  135
Rear traffic alert  137
 7Practical informationCompatibility of fuels  140
Refuelling  140
Rechargeable hybrid system  141
Charging the traction battery (Rechargeable  
hybrid engine) 
 148
Towing device  150
Towing device with quickly detachable towball  151
Roof bars  154
Very cold climate screen  155
Snow chains  155
Energy economy mode  156
Bonnet  156
Engine compartment  158
Checking levels  158
Checks  159
Free-wheeling  161
Advice on care and maintenance  162
 8In the event of a breakdownWarning triangle  165
Tool kit  165
Temporary puncture repair kit  166
Spare wheel  169
Changing a bulb  171
Fuses  173
12
 
V battery
 
/ Accessory batteries  173
Towing the vehicle  178
 9Technical dataEngine technical data and towed loads  181
Petrol engines  182
Rechargeable hybrid engine  183
Dimensions  184
Identification markings  184
 10 MYCITROËN DRIVE PLUS - MYCITROËN PLAY PLUS
First steps  185
Customisation  188
Steering mounted controls  189
Applications  190
Voice commands  190
Navigation  191
Connectivity  192
Mirror Screen  194
Media  195
Phone  197
Settings  198
Help  199
 11Event data recorders
  ■
Alphabetical index
  ■
Appendix   
Page 17 of 228

15
Instruments
1Dynamic stability control (DSC)/Anti-slip 
regulation (ASR)
Flashing.
DSC/ASR regulation is activated in the 
event of a loss of grip or trajectory.
Fixed.
The DSC/ASR system has a fault.
Carry out (3).
Emergency brake malfunction (with 
electric parking brake)
Fixed, accompanied by the 
message "Parking brake fault".
Emergency braking does not deliver optimal 
performance.
If automatic release is not available, use manual 
release or carry out (3).
Hill start assistFixed, accompanied by the 
message "Anti roll-back system 
fault".
The system has a fault.
Carry out (3).
Post Collision Safety BrakeFixed, associated with the 
Service warning lamp, 
accompanied by the display of a message and 
an audible signal.
The system has a fault.
Carry out (3) quickly.
Under-inflationFixed.
The pressure in one or more tyres is too 
low.
Check the pressure of the tyres as soon as 
possible.
Reinitialise the detection system after adjusting 
the pressure.
Under-inflation warning lamp 
flashing then fixed and Service 
warning lamp fixed.
The tyre pressure monitoring system is faulty.
Under-inflation detection is no longer monitored.
Check the tyre pressures as soon as possible 
and carry out (3).
Parking sensorsFixed, accompanied by an onscreen 
message and an audible signal.
The system is deactivated.
Fixed, associated with the Service 
warning lamp, accompanied by the 
display of a message and an audible signal.
The system has a fault.
Carry out (3).
Active bonnetFixed, accompanied by the display of a 
message.
The active bonnet has been triggered.
Do not touch the bonnet.
Call a roadside assistance provider or carry 
out (3) while driving no faster than 19 mph (30 
km/h).
AirbagsFixed, accompanied by the display 
of a message.
One of the airbags or seat belt pyrotechnic 
pretensioners is faulty.
Carry out (3).
Front passenger airbag (ON)Fixed.
The front passenger airbag is activated.
The control is set to the “ON” position.
In this case, do NOT install a "rearward 
facing" child seat on the front passenger seat 
- risk of serious injury!
Front passenger airbag (OFF)Fixed.
The front passenger airbag is deactivated.
The control is set to the "OFF "
  position.
A "rearward facing" child seat can be installed, 
unless there is a fault with the airbags (Airbags 
warning lamp on).
Low fuel levelFixed, with the reserve level shown in red, 
accompanied by an audible signal and 
the display of a message.
When it first comes on, you have approximately 
6 litres of fuel  remaining in the tank (reserve).
Until the fuel level is topped up, this alert will 
be repeated every time the ignition is switched 
on, with increasing frequency as the fuel level 
decreases and approaches zero.
Refuel without delay to avoid running out of fuel.   
Page 91 of 228

89
Driving
6Towing
Driving with a trailer places greater 
demands on the towing vehicle and 
particular care must be taken.
Do not exceed the maximum towable 
weights.
At altitude: reduce the maximum load by 
10% per 1,000 metres of altitude; the lower 
air density at high altitudes decreases engine 
performance.
New vehicle: do not tow a trailer until the 
vehicle has driven at least 620 miles 
(1,000 kilometres).
If the outside temperature is high, let the 
engine idle for 1 to 2 minutes after the 
vehicle comes to a stop, to help it to cool.
Before setting off
Nose weight
► Distribute the load in the trailer so that the 
heaviest items are as close as possible to the 
axle and the nose weight (at the point where it 
joins your vehicle) approaches the maximum 
permitted without exceeding it.
Tyres
► Check the tyre pressures of the towing 
vehicle and of the trailer , observing the 
recommended pressures.
Lighting
► Check the electrical signalling on the trailer 
and the headlamp beam height of your vehicle.
If a genuine CITROËN towing device is 
used, the rear parking sensors will be 
deactivated automatically to avoid the audible 
signal.
When driving
Cooling
Towing a trailer uphill causes the coolant 
temperature to increase. The maximum towable 
load depends on the gradient and the exterior 
temperature. The fan’s cooling capacity does not 
increase with engine speed.
►
 
Reduce speed and lower the engine speed to 
limit the amount of heating produced.
►
 
Pay constant attention to the coolant 
temperature.
If this warning lamp and the STOP 
warning lamp come on, stop the 
vehicle and switch off the engine as soon as 
possible.
Brakes
Using the engine brake is recommended to limit 
the overheating of the brakes. Braking distances 
are increased when towing a trailer.
Side wind
Bear in mind that the vehicle will be more 
susceptible to wind when towing.
Anti-theft protection
Electronic immobiliser
The keys contain a code, which must be 
recognised by the vehicle before starting is 
possible.
If the system malfunctions, indicated by the 
display of a message, the engine will not start.
Contact a CITROËN dealer.
Starting/Switching off the 
engine with Keyless Entry 
and Starting
The electronic key must be present in the  passenger compartment.
If the electronic key is not detected, a 
message is displayed.
Move the electronic key so that the engine 
can be started or switched off.    
Page 134 of 228

132
Driving
 
A warning lamp appears in the door mirror on the 
side in question:
– 
fixed
 , immediately when another vehicle is in 
the blind spot or is approaching in an adjacent 
lane.
–
 
flashing , after about 1 second when the 
direction indicator is used.
Activation/Deactivation
It is configured in the ADAS touch screen 
application.
When starting the vehicle, the
  warning   lamp 
comes on in each mirror to indicate that the 
system is activated.
The status of the system is memorised when the 
ignition is switched off.
The system is automatically deactivated  when towing with a towing device 
approved by CITROËN.
Operating conditions
– All vehicles are moving in the same direction 
and in adjacent lanes.
–
 
When overtaking a vehicle, the speed 
difference is less than 9
  mph (15   km/h).
– Traffic is flowing normally.
– When overtaking a vehicle over a certain 
period of time, the vehicle being overtaken 
remains in the blind spot.
Operating limits
No alert is triggered in the following conditions:
–  presence of stationary objects (e.g.   parked 
vehicles, safety rails, lampposts, signs).
–
 
vehicles travelling in the opposite direction.
–
 
if the rear bumper is damaged.
It is possible that warnings are not given, 
are given too late or seem unjustified. 
This system does not replace the need for 
vigilance on the part of the driver. Always 
check in the mirrors and look over your 
shoulders before changing lanes to avoid an 
accident. 
If the rear bumper is to be repainted, contact 
a dealer or a qualified workshop; certain types 
of paint could interfere with the operation of 
the radars.
Malfunction
If the event of a malfunction, this warning 
lamp comes on in the instrument panel, 
accompanied by the display of a message.
Have it checked by a CITROËN dealer or a 
qualified workshop.
The system may be temporarily disturbed  by certain weather conditions (e.g.   heavy 
rain, hail or extreme temperature changes).
In particular, driving on a wet road or going 
from a dry to a wet area can cause false 
alerts (e.g.
  presence of a cloud of water 
droplets in the blind spot interpreted as a 
vehicle).
In bad or wintry weather, ensure that the 
sensors are not covered by mud, ice or snow.
Take care not to cover the warning zone in 
the door mirrors, or the detection zones on 
the rear bumper with adhesive labels or other 
objects; they may hamper correct operation of 
the system.
Parking sensors
For more information, refer to the 
General recommendations on the use 
of driving and manoeuvring aids .
 
    
Page 135 of 228

133
Driving
6This system detects and signals the proximity of 
obstacles (e.g.  pedestrian, vehicle, tree, barrier) 
using sensors located in the bumper.
Rear parking sensors
► Engage reverse gear to start  the system 
(confirmed by an audible signal).
The system is switched off when reverse gear is 
disengaged.
Audible assistance 
 
The system signals the presence of obstacles 
which are both within the sensors’ detection zone 
and in the vehicle path defined by the direction of 
the steering wheel.
 
 
Depending on version, in the example shown, 
only the obstacles present in the shaded area 
will be signalled by the audible assistance.
The proximity information is given by an 
intermittent audible signal, the frequency of 
which increases as the vehicle approaches the 
obstacle.
When the distance between the vehicle and 
the obstacle becomes less than about thirty 
centimetres, the audible signal becomes 
continuous.
The sound emitted by the speaker (right or 
left) indicates the side on which the obstacle is 
located.
Adjusting the audible signalPressing this button in the touch 
screen opens the window for 
adjusting the volume of the audible signal.
Visual assistance 
 
This supplements the audible signal, without 
taking account of the vehicle's trajectory, by 
displaying bars on the screen that represent the 
distance between the obstacle and the vehicle 
(white: more distant, orange: close, red: very 
close).
When the obstacle is very close, the "Danger" 
symbol is displayed on the screen.
Front parking sensors
Supplementing the rear parking sensors, the 
front parking sensors are triggered when an 
obstacle is detected in front and the speed of the 
vehicle is below 6 mph (10
  km/h).
Front parking sensor operation is suspended if 
the vehicle stops for more than three seconds in 
forward gear, if an obstacle is no longer detected 
or the vehicle speed exceeds 6
  mph (10   km/h).
The sound emitted by the speaker (front or rear) locates the obstacle relative to 
the vehicle, whether in front of or behind it on 
its path.
Deactivation/Activation
It is configured in the ADAS touch screen 
application.
If the function is deactivated, this indicator 
lamp lights up on the instrument panel.
The system status is saved when the ignition is 
switched off.
 
    
Page 136 of 228

134
Driving
The rear parking sensors are deactivated automatically if a trailer or bicycle carrier 
is connected to a towing device installed in 
accordance with the Manufacturer's 
recommendations.
In this case, the outline of a trailer is displayed 
at the rear of the image of the vehicle.
When starting the vehicle, the graphic 
and audible aids are only available after 
the touch screen has started up.
Operating limits
If the boot is heavily loaded, the vehicle may tilt, 
affecting distance measurements.
Malfunction
In the event of a malfunction when 
changing into reverse gear, these 
warning lamps light up on the instrument panel, 
accompanied by the display of a message and 
an audible signal (short beep).
Have it checked by a CITROËN dealer or a 
qualified workshop.
Top Rear Vision
For more information, refer to the 
General recommendations on the use 
of driving and manoeuvring aids .When reverse gear is engaged, with the engine 
running, this system displays views of the 
vehicle's close surroundings
  on the touch screen 
using a camera located at the rear of the vehicle.
 
 
 
 
The screen is divided into 3 parts with a side 
menu, a contextual view and a view from above 
the vehicle in its close surroundings.
The parking sensors supplement the information 
in the view from above the vehicle.
Different contextual views are available:
–  
Automatic zoom view
 .
–
 
Standard view
 .
–
 
Panoramic view
 .
Depending on the context, the system chooses 
the best view to display (standard or automatic 
zoom).
The view type can be changed at any time 
during the manoeuvre.
The system status is not saved when the ignition 
is switched off.
Operating principle 
 
Using the camera, the vehicle's close 
surroundings are recorded during low speed 
manoeuvres.
An image from above the vehicle in its close 
surroundings is created in real time (on the side 
of the screen), as the vehicle progresses.
This view makes it easier to align the vehicle 
when parking and to perceive nearby obstacles. 
It is automatically deleted if the vehicle remains 
stationary for too long.
Configuration
In the side menu, this menu allows you to 
carry out the following operations:
–
 
volume adjustment of the audible signal.
–
 
brightness adjustment.
–
 
contrast adjustment.
–
 
activation/deactivation of camera washing 
(depending on version).
Activation/Deactivation
To activate the camera, engage reverse gear.   
Page 137 of 228

135
Driving
6The system is deactivated:
– when changing out of reverse gear .
–
 
by pressing the cross in the top left-hand 
corner of the touch screen.
Automatic zoom view 
 
The rear camera records the surroundings 
during the manoeuvre to create a rear view from 
above the vehicle in its close surroundings, 
making it possible to manoeuvre the vehicle 
around the surrounding obstacles.
Using the sensors located on the rear bumper, 
the automatic zoom view is displayed when 
approaching an obstacle at the red line (less 
than 30 cm) during the manoeuvre.
This view is only available automatically.
Obstacles may appear further away than 
they actually are.
It is important to monitor the sides of the 
vehicle during the manoeuvre, using the 
mirrors.
Parking sensors also provide additional 
information about the area around the vehicle.
Standard view 
 
The area behind the vehicle is displayed on the 
screen.
The blue lines  1 represent the width of your 
vehicle, with the mirrors unfolded; their direction 
changes according to the position of the steering 
wheel.
The red line  2 represents a distance of 30
  cm 
from the rear bumper; the two blue lines  3 and 4 
represent 1
  m and 2   m, respectively.
This view is available automatically or by 
selection in the side menu.
Panoramic view 
 
The panoramic view allows you to leave, in 
reverse, a parking space by anticipating the 
arrival of vehicles, pedestrians or cyclists.
This view is not recommended for carrying out a 
complete manoeuvre.
This view is only available by selection in the 
side menu.
360 vision
For more information, refer to the 
General recommendations on the use 
of driving and manoeuvring aids .
This system allows you to view your vehicle's 
close surroundings
  on the touch screen using 
cameras, located at the front and rear of the 
vehicle, as well as under the door mirrors.
 
 
 
 
The screen is divided into 4 parts with two side 
menus, a contextual view and a view from above 
the vehicle in its close surroundings.
The parking sensors supplement the information 
in the view from above the vehicle.
Depending on the view angle chosen in the 
left-hand side menu, the system provides 
specific visual assistance in particular driving 
conditions such as entering a blind intersection 
or manoeuvring in areas with reduced visibility.   
Page 138 of 228

136
Driving
Different contextual views are available for the 
rear or for the front:
– 
Automatic zoom view
 .
–
 
Standard view
 .
–
 
Panoramic view
 .
Depending on the context, the system chooses 
the best view to display (standard or automatic 
zoom).
The view type can be changed at any time 
during the manoeuvre.
The system status is not saved when the ignition 
is switched off.
Operating principle
Reconstituted view
The cameras are activated and a reconstruction 
of a view from above your vehicle in its close 
surroundings is displayed on the touch screen.
Live view 
 
The front, rear and side views automatically 
appear in the view from above the vehicle.
It is also possible to display any view directly by 
selecting the corresponding zone.
The front view can be selected in forward gear 
up to 10 mph (16 km/h).
Installing the very cold climate screen 
can alter the image transmitted by the 
front camera.
Configuration
In the side menu, this menu allows you to 
carry out the following operations:
–
 
volume adjustment of the audible signal.
–
 
brightness adjustment.
–
 
contrast adjustment.
–
 
activation/deactivation of camera washing 
(depending on version).
Activation/Deactivation
Automatic
With the rear camera, engine running and 
vehicle stationary, rear vision is displayed 
automatically if reverse gear is engaged.
With the front camera, engine running and speed 
below 10 mph (16 km/h), front vision is displayed 
automatically if a gear is engaged.
Manual
► In the  ADAS touch screen application, 
select Functions>Panoramic camera.
The system is deactivated:
–
 
automatically for the rear
 , when changing out 
of reverse gear.
–
 
automatically for the front, above 
approximately 10 mph (16 km/h).
–
 
by pressing the cross in the top left-hand 
corner of the touch screen.
Automatic zoom view 
 
The front or rear camera records the 
surroundings during the manoeuvre to create 
a front or rear view from above the vehicle in 
its close surroundings, making it possible to 
manoeuvre the vehicle around the surrounding 
obstacles.
Using the sensors located on the front or 
rear
  bumper, the automatic zoom view is 
displayed when approaching an obstacle at the 
red line (less than 30 cm) during the manoeuvre.
This view is only available automatically.
Depending on version, it can be activated/
deactivated in the  ADAS touch screen 
application.
Obstacles may appear further away than 
they actually are.
It is important to monitor the sides of the 
vehicle during the manoeuvre, using the 
mirrors.
Parking sensors also provide additional 
information about the area around the vehicle.   
Page 139 of 228

137
Driving
6Standard view 
 
Depending on the context, the area behind or in 
front of your vehicle is displayed on the screen.
The blue lines (at the rear)/orange lines (at the 
front) 1 represent the width of your vehicle, with 
the mirrors unfolded;  their direction changes 
according to the position of the steering wheel.
The red line  2 represents a distance of 30 cm 
from the rear or front bumper; the two blue lines 
(at the rear)/orange lines (at the front)
 
3
  and 
4
  represent 1 m and 2 m respectively.
This view is available automatically or by 
selection in the left-hand side menu.
Panoramic view 
 
The rear or front panoramic view allows you to 
leave a parking space by anticipating the arrival 
of vehicles, pedestrians or cyclists.
This view is not recommended for carrying out a 
complete manoeuvre.
This view is only available by selection in the left-
hand side menu.
Side views
The left-hand/right-hand side view allows you to 
view the surroundings of each side of the vehicle 
(e.g.
  pavement, low wall, other vehicle parked 
next to it).
 
 
► Select the relevant view in the view from 
above the vehicle.
The selected area turns yellow and the side view 
appears in the middle of the screen.
This view is not recommended for carrying out a 
complete manoeuvre.
Rear traffic alert
For more information, refer to the 
General recommendations on the use 
of driving and manoeuvring aids .
 
 
When engaging reverse gear with the engine 
running, or when reversing at up to 6
  mph 
(10
  km/h), this system warns of approaching 
obstacles (e.g.
  pedestrian, cyclist, vehicle, truck, 
motorcycle) in the rear blind spots of the vehicle, 
using the radars installed in the bumper.
The system detects obstacles moving at more 
than 2
  mph (3   km/h) at a maximum distance of 
40
  m.
The system operates in addition to the Parking 
sensors, Top Rear Vision or 360 vision functions 
(depending on version).
For more information about the  Parking 
sensors, Top Rear Vision  or 360 vision 
functions, refer to the corresponding sections.
The driver must monitor their  surroundings before and during the 
whole manoeuvre. Drive slowly and carefully 
in reverse gear in case of reduced or no 
visibility.   
Page 140 of 228

138
Driving
Operating principle 
 
 
 
When an approaching obstacle is detected, the 
symbol 1 or 2 flashes on the touch screen, in the 
Parking sensors view or in the various contextual 
views of the Top Rear Vision or 360 vision 
functions (depending on version).
The symbol is complemented by an audible 
signal when the vehicle is reversing.
An obstacle is approaching in the  blind spot on the rear right-hand/
left-hand side or on both sides of the vehicle.
In the event of a malfunction of these visual 
display functions or of the touch screen, or if the 
driver deactivates the views from these functions 
on the touch screen, detection of an approaching 
obstacle is still indicated by the audible signal 
when the vehicle is reversing.
Activation/Deactivation
It is configured in the ADAS touch screen 
application.
The system's status is saved when the ignition is 
switched off.
Operating limits
The system may not work in the following cases:
–  T owing a trailer.
–
 
Using a bicycle carrier on a towing device.
–
 
Extreme temperature changes.
–
 
Damaged rear bumper
 .
–
 
Accumulation or projection of external 
elements (e.g. mud, frost, snow), stickers 
application.
It is possible that warnings are not given, 
are given too late or seem unjustified. 
Consequently, always stay in control of your 
vehicle and be prepared to react at any time 
to avoid an accident.
In the event of repainting the rear 
bumper, consult the CITROËN dealer or 
a qualified workshop; certain types of paint 
could interfere with the operation of the 
radars.
Malfunction
In the event of a malfunction when 
engaging reverse gear, during reversing 
or when the driver attempts to activate the  system, this warning lamp lights up on the 
instrument panel, accompanied by the display of 
a message and an audible signal.
Have it checked by a CITROËN dealer or a 
qualified workshop.