airbag off CITROEN C5 AIRCROSS DAG 2022 Handbook (in English)
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2022, Model line: C5 AIRCROSS DAG, Model: CITROEN C5 AIRCROSS DAG 2022Pages: 276, PDF Size: 7.92 MB
Page 94 of 276

92
Safety
Installing universal, ISOFIX and i-Size child seats
In compliance with European regulations, this table indicates the possib\
ilities for installing child seats secured using the seat belt and unive\
rsally approved
(a) as well as the largest ISOFIX and i-Size child seats for the seat positions fitted with ISOFIX anchorage points in the vehicle.
Seat numbers
Front seats Rear seats
13456
3 1456
Front passenger airbag -Deactivated
"OFF " (b) Activated "ON"
(c) -
--
Position compatible with a universal (a) child seat no
yes (e) (h) yes (e) (i) yesyes (f) yes
Position compatible with an i-Size child seat no
yes yesnoyes
Position equipped with a TOP
TETHER hook no
yes yesnoyes
"Carrycot " type child seat no nononono
"Rearward facing" ISOFIX
child seat no
R3 (d) noR2 noR2
"Forward facing" ISOFIX child
seat no
F3 (d) F3noF3
Booster child seat noB3 (g) B3B3B3
"RÖMER Baby-Safe Plus and its ISOFIX
base"
(size category: E)
Group 0+: from birth to 13 kg
Installed "rearward facing" using an ISOFIX base which is attached to rings
A
.
Installed only on the front passenger seat or on the rear side seats.
The base has a support leg, height-
adjustable, which rests on the vehicle's floor. This child seat can also be secured with a
seat belt. In this case, only the shell is used and attached to the vehicle seat using the three-point seat belt.
"RÖMER Duo Plus ISOFIX "
(size category: B1)
Group 1: from 9 to 18 kg
"RÖMER Duo Plus ISOFIX "
(size category: B1)
Group 1: from 9 to 18 kg
Suitable for forward-facing installation only.
Attached to rings
A and ring B, referred to as
TOP TETHER, using an upper strap.
Only suitable for installation on the front
passenger seat or the rear side seats. The
head restraint on the rear side seat must be raised to the maximum.
Three seat body angles: sitting, reclining, lying down.
This child seat can also be used in seat positions not equipped with ISOFIX
mountings. In this case, it must be secured to the vehicle's seat by the three-point seat belt. Adjust the front seat of the vehicle so that the child's feet do not touch the backrest.
i-Size child seats
i-Size child seats have two latches that are
anchored to the two rings A.
These i-Size child seats also have:
–
either an upper strap that is attached to ring B
.
–
or a support leg that rests on the vehicle
floor
, compatible with the approved i-Size seat
position.
Their role is to prevent the child seat from tipping
forward in the event of a collision.
For more information on the ISOFIX mountings,
refer to the corresponding section.
Page 95 of 276

93
Safety
5Installing universal, ISOFIX and i-Size child seats
In compliance with European regulations, this table indicates the possib\
ilities for installing child seats secured using the seat belt and unive\
rsally approved
(a) as well as the largest ISOFIX and i-Size child seats for the seat positions fitted with ISOFIX anchorage points in the vehicle.
Seat numbers
Front seats Rear seats
13456
3 1456
Front passenger airbag -Deactivated
"OFF " (b) Activated "ON"
(c) -
--
Position compatible with a universal (a) child seat no
yes (e) (h) yes (e) (i) yesyes (f) yes
Position compatible with an i-Size child seat no
yes yesnoyes
Position equipped with a TOP
TETHER hook no
yes yesnoyes
"Carrycot " type child seat no nononono
"Rearward facing" ISOFIX
child seat no
R3 (d) noR2 noR2
"Forward facing" ISOFIX child
seat no
F3 (d) F3noF3
Booster child seat noB3 (g) B3B3B3
Page 96 of 276

94
Safety
Rules:
– A position that is i-Size compatible is also compatible with R1, R2 and F2X, F2, B2.
–
A
position that is R3 compatible is also compatible with R1 and R2.
–
A
position that is R2 compatible is also compatible with R1.
–
A
position that is F3 compatible is also compatible with F2X and F2.
–
A
position that is B3 compatible is also compatible with B2.
(a) Universal child seat: child seat that can be installed in all vehicles u\
sing the seat belt.
(b) To install a "rearward facing" child seat at this seat position, the front passenger airbag must be d\
eactivated (" OFF").
(c) Only a "forward facing" child seat is authorised at this seat position with the front passenge\
r airbag activated (" ON").
(d) Tilt the seat backrest to 45°, then install the child seat.
Straighten the backrest until it contacts the child seat's backrest.
(e) For a seat with height adjustment, set it to the maximum height.
(f) A child seat with a support leg must never be installed on the centre rea\
r passenger seat.
(g) The vehicle seat must be as far back as possible.
(h) For universal child seat: groups 0, 0+, 1, 2 & 3.
(i) For universal child seat: groups 1, 2 & 3 only.