steering wheel adjustment Citroen C5 DAG 2010.5 (RD/TD) / 2.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2010.5, Model line: C5 DAG, Model: Citroen C5 DAG 2010.5 (RD/TD) / 2.GPages: 336, PDF Size: 18.85 MB
Page 43 of 336
II
42
M U L T I F U N C T I O N S C R E E N S
Adjusting the brightness and
contrast
Press on A .
Use C to select the "Brightness -
v i d e o a d j u s t m e n t " m e n u . C o n fi r m
with a press on C on the steering
wheel or D o n t h e a u d i o e q u i p -
ment.
S e l e c t t h e c o n fi g u r a t i o n o f t h e
screen using C . C o n fi r m w i t h a
press on C on the steering wheel
or D o n t h e a u d i o e q u i p m e n t .
Select the brightness setting.
C o n fi r m w i t h a p r e s s o n C on the
steering wheel or D on the audio
e q u i p m e n t .
Select the inverse or normal dis-
play mode using C then validate
with a press on C on the steering
wheel or D o n t h e a u d i o e q u i p -
ment. To adjust the brightness
select "+" or "-" and save your
setting with a press on C .
C o n fi r m w i t h "OK" on the
screen. Adjusting the date and the
time
Press on A .
Use C to select the "Date and
time adjustment" menu, then
c o n fi r m y o u r c h o i c e w i t h a p r e s s
on C on the steering wheel or D
o n t h e a u d i o e q u i p m e n t .
S e l e c t t h e s c r e e n c o n fi g u r a t i o n
using C . C o n fi r m w i t h a p r e s s o n
C on the steering wheel or D on
t h e a u d i o e q u i p m e n t .
Select the date and the time set-
tings, using B . C o n fi r m w i t h a
press on C on the steering wheel
or D o n t h e a u d i o e q u i p m e n t .
Press C to select the values you
w i s h t o m o d i f y . C o n fi r m y o u r
choice with a press on C on the
steering wheel or D on the audio
e q u i p m e n t .
C o n fi r m w i t h "OK" on the
screen. Choosing the units
Press on A .
Use C to select the "Choice of
u n i t s " m e n u , t h e n c o n fi r m y o u r
choice with a press on C on the
steering wheel or D on the audio
e q u i p m e n t .
Using C , select the unit then val-
idate with a press on C on the
steering wheel or D on the audio
e q u i p m e n t .
C o n fi r m w i t h "OK" on the
screen.
Selection of the type of
information displayed (Mode)
Successive presses on the end of
t h e w i p e r s t a l k o r o n t h e MODE but-
t o n o n t h e a u d i o e q u i p m e n t p e r m i t
selection of the type of informa-
tion presented on the multifunction
screen (date or radio, CD, MP3 CD,
CD changer).
Page 69 of 336
III
66
C O M F O R T As a safety precaution, these op-
erations must only be carried out
while the vehicle is stationary.
STEERING WHEEL ADJUSTMENT
The steering wheel can be adjusted
for height and reach to adapt the
driving position to the size of the
driver.
Adjustment
First, adjust the driver's seat to
the most suitable position.
When stationary , pull the lever A
to unlock the steering wheel ad-
justment.
Adjust for height and reach.
Push the lever to lock the steer-
ing wheel adjustment.
A f t e r l o c k i n g , i f y o u p r e s s fi r m l y o n
the steering wheel, a slight click may
be heard.
Automatic day/night model
In order to guarantee optimum vis-
ibility during your manoeuvres, the
mirror lightens automatically when
reverse gear is engaged.
By means of a sensor, which mea-
sures the light from the rear of the
vehicle, this system automatically
and progressively changes between
the day and night uses.
It has an anti-dazzle system which
darkens the mirror glass: this reduc-
es any driver discomfort caused by
the light beam of following vehicles,
the sun...
I n v e h i c l e s fi t t e d w i t h e l e c t r o c h r o m e
exterior rear view mirrors, the system
has an on/off button and an associ-
ated warning lamp.
On
With the ignition on, press on
button 1 .
The warning lamp 2 comes on and
the mirror is in automatic mode.
Off
Press on button 1 .
The warning lamp 2 goes out and
t h e m i r r o r r e m a i n s i n i t s l i g h t e s t d e fi -
nition.
Page 70 of 336
III
66
C O M F O R T As a safety precaution, these op-
erations must only be carried out
while the vehicle is stationary.
STEERING WHEEL ADJUSTMENT
The steering wheel can be adjusted
for height and reach to adapt the
driving position to the size of the
driver.
Adjustment
First, adjust the driver's seat to
the most suitable position.
When stationary , pull the lever A
to unlock the steering wheel ad-
justment.
Adjust for height and reach.
Push the lever to lock the steer-
ing wheel adjustment.
A f t e r l o c k i n g , i f y o u p r e s s fi r m l y o n
the steering wheel, a slight click may
be heard.
Automatic day/night model
In order to guarantee optimum vis-
ibility during your manoeuvres, the
mirror lightens automatically when
reverse gear is engaged.
By means of a sensor, which mea-
sures the light from the rear of the
vehicle, this system automatically
and progressively changes between
the day and night uses.
It has an anti-dazzle system which
darkens the mirror glass: this reduc-
es any driver discomfort caused by
the light beam of following vehicles,
the sun...
I n v e h i c l e s fi t t e d w i t h e l e c t r o c h r o m e
exterior rear view mirrors, the system
has an on/off button and an associ-
ated warning lamp.
On
With the ignition on, press on
button 1 .
The warning lamp 2 comes on and
the mirror is in automatic mode.
Off
Press on button 1 .
The warning lamp 2 goes out and
t h e m i r r o r r e m a i n s i n i t s l i g h t e s t d e fi -
nition.
Page 172 of 336
IX
151
D R I V I N G
CRUISE CONTROL
S y s t e m w h i c h a u t o m a t i c a l l y m a i n -
tains the vehicle speed programmed
by the driver, without any action on
the accelerator pedal.
The cruise control is switched on
manually: the vehicle speed must be
at least 25 mph (40 km/h) and you
must be in at least:
- 4 t h g e a r f o r m a n u a l g e a r b o x e s ,
- 2 n d g e a r f o r a u t o m a t i c g e a r b o x e s . Displays on the instrument
panel
The programmed information is
grouped together in zone
A of the
instrument panel.
Programming
Press button 4 to select cruise
control mode " CRUISE ".
Steering mounted controls
The cruise control switches are lo-
cated on the left-hand side of the
steering wheel. T h e s e l e c t i o n i s c o n fi r m e d b y t h e
display of the function in zone
A of
the instrument panel.
When the function is selected, no
cruising speed has yet been
memorised . Once the desired speed has been
reached using the accelerator, press
button
1 or button 2 . The cruising
speed is then memorised and cruise
control is activated. The cruising
speed is displayed in zone A of the
instrument panel, and "ON" is dis-
played.
Adjustment of the memorised
speed while cruise control is
in operation
You can adjust the memorised speed, displayed in zone A , by pressing:
- Button 1 to increase the speed.
- Button 2 to reduce the speed.
S u c c e s s i v e p r e s s e s w i l l m o d i f y t h e
cruise speed in steps of 1 mph and a
continuous press in steps of 5 mph.
You can then release the accelera-
tor pedal. The vehicle will automati-
cally keep to the speed chosen.
The vehicle speed may vary slightly
from that memorised.
If during cruise control the system
cannot keep to the cruise speed
(e.g. on a steep descent), then the
s p e e d fl a s h e s . I f n e c e s s a r y , b r a k e t o
curb your speed.