headlamp Citroen C5 RHD 2012 (RD/TD) / 2.G User Guide

V
92
VISIBILITY





DIRECTIONAL LIGHTING


without cornering lighting


with cornering lighting




"Cornering lighting" function

With dipped or main beams, this
function provides additional lighting
for the inside of a bend, when the
vehicle speed is below 25 mph
(approx 40 km/h).
This lighting is most useful when
travelling at low and medium speed
(urban driving, winding road, inter-
sections, parking manoeuvres...).

Activation
This function is activated:


- when the direction indicator is
activated,

- from a certain angle of rotation of
the steering wheel.
Deactivation
This function is deactivated:


- below a certain angle of rotation
of the steering wheel,

- when stationary or at very low
speed,

- when reverse gear is engaged,

- when the directional headlamps
are switched off.

V
93
VISIBILITY

Programming
The function is activated or deac-
tivated via the instrument panel
screen "Main Menu".
To do this, select "Vehicle parameters\
Lighting\Directional headlamps".

Operating fault
If a fault occurs, this warning
lamp fl ashes in the instru-
ment panel, accompanied
by a message in the multi-
function screen.
Contact a CITROËN dealer or a
qualifi ed workshop.
When stationary or moving at very
low speed or when reverse gear is
engaged, the function is inactive.
The status of the function remains
in the memory when the ignition is
switched off.










Directional headlamps
function
When the dipped or main beam
headlamps are on, this function, as-
sociated with the "cornering lighting"
function, enables the light beam to
follow the direction of the road.
The use of this function, linked with
the xenon headlamps only, consid-
erably improves the quality of your
lighting when cornering.

with directional lighting

without directional lighting

V
95
VISIBILITY

Reverse gear
When reverse gear is engaged, the
rear wiper operates if the windscreen
wipers are operating.

Programming
The function is activated or deac-
tivated via the instrument panel
screen confi guration menu.
This function is activated by default.











Windscreen and headlamp
wash


)
Pull the windscreen wiper stalk
towards you. The windscreen
wash then the windscreen wip-
ers operate for a fi xed period.
The headlamp washers only operate
when the dipped beam headlamps
are on
.













Automatic rain sensitive
windscreen wipers
The windscreen wipers operate au-
tomatically, without any action on the
part of the driver, if rain is detected
(sensor behind the rear view mirror),
adapting their speed to the intensity
of the rainfall.

Activation
This is controlled manually by the
driver by moving stalk A
to the
"AUTO"
position.
It is accompanied by a message in
the instrument panel screen.
Switching off
This is controlled manually by the
driver by moving stalk A
upwards
and returning it to position "0"
.
It is accompanied by a message in
the instrument panel screen.
The automatic wiping must be reac-
tivated if the ignition has been off for
more than one minute, by pushing
stalk A
downwards.

Operating fault
If an automatic wiping malfunction
occurs, the wipers will operate in in-
termittent mode.
Have it checked by a CITROËN
dealer or a qualifi ed workshop.
Do not cover the rain sensor, linked
with the sunshine sensor and loca-
ted in the centre of the windscreen
behind the rear view mirror.
Switch off the automatic wip-
ing when using an automatic car
wash.
In winter, it is advisable to wait until
the windscreen is completely clear
of ice before activating the auto-
matic wiping.

V
98
VISIBILITY











INTERIOR MOOD LIGHTING

Your vehicle is equipped with interior
mood lighting for the centre console
and the door handles.

Central console

The lamps are located on the roof
console, near the front interior lamp.
They illuminate the central console.

Lighting for door opening
controls

Operation
These lamps are activated with the
automatic illumination of headlamps,
when the ambient light is poor. They
are deactivated when the instrument
panel is off.
The intensity of the lighting varies
along with that of the instrument
panel.


)
Press buttons A
to increase or re-
duce the intensity of the lighting.

This is located on the front and rear
interior door opening controls.
The rear door opening controls light-
ing is deactivated if the child lock
is on.

XX














PETROL ENGINES

The various caps and covers allow
access for checking fl uid levels and
for replacing certain components.


1.
Screenwash and headlamp wash
reservoir.

2.
Power steering fl uid reservoir or
power steering and suspension
fl uid reservoir.

3.
Engine coolant header tank.

4.
Engine oil dipstick.

5.
Engine oil fi ller cap.

6.
Brake fl uid reservoir.

7.
Battery.

8.
Air fi lter.
1.6i THP


1.6i VTi

167
CHECKS

X
!
168
CHECKS
Vehicles fi tted with the 2.0i 16v

engine may be fi tted with metal
spring suspension. In this case,
a different power steering fl uid reser-
voir is fi tted.
2.0i 16V


1.
Screenwash and headlamp wash
reservoir.

2.
Power steering fl uid reservoir or
power steering and suspension
fl uid reservoir.

3.
Engine coolant header tank.

4.
Engine oil dipstick.

5.
Engine oil fi ller cap.

6.
Brake fl uid reservoir.

7.
Battery.

8.
Air fi lter.

X
!
169
CHECKS














DIESEL ENGINES

The various caps and covers allow
access for checking fl uid levels, for
replacing certain components and
for priming the fuel system.


1.
Screenwash and headlamp wash
reservoir.

2.
Power steering fl uid reservoir or
power steering and suspension
fl uid reservoir, depending on
equipment.

3.
Engine coolant header tank.

4.
Engine oil dipstick.

5.
Engine oil fi ller cap.

6.
Air fi lter.

7.
Brake fl uid reservoir.

8.
Battery.
As the Diesel fuel system
operates under high pressure,
any work on the fuel system is
prohibited.
Vehicles fi tted with the HDi 140

engine may be fi tted with metal
spring suspension. In this case, a
different power steering fl uid reser-
voir is fi tted.
HDi 110
/ e-HDi 110


HDi 140

X!
170
CHECKS

HDi 160 - HDi 200 engines
(with particle emissions filter)



1.
Screenwash and headlamp wash
reservoir.

2.
Power steering and suspension
fl uid reservoir.

3.
Engine coolant header tank.

4.
Engine oil dipstick.

5.
Engine oil fi ller cap.

6.
Air fi lter.

7.
Brake fl uid reservoir.

8.
Battery.

As the Diesel fuel system ope-
rates under high pressure:


- All work on the fuel system is
prohibited.

- HDi engines make use of ad-
vanced technology.
All maintenance and repairs require
special qualifi cations which only a
CITROËN dealer can guarantee.
HDi 160


HDi 200

X!
171
CHECKS

V6 HDi 240 engine (with
particle emissions filter)


V6 HDi 240


1.
Screenwash and headlamp wash
reservoir.

2.
Power steering and suspension
fl uid reservoir.

3.
Engine coolant header tank.

4.
Engine oil dipstick.

5.
Engine oil fi ller cap.

6.
Air fi lter.

7.
Brake fl uid reservoir.

8.
"+" and "-" terminals for emergency
starting with a slave battery.

As the Diesel fuel system ope-
rates under high pressure:


- All work on the fuel system is
prohibited.

- HDi engines make use of ad-
vanced technology.
All maintenance and repairs require
special qualifi cations which only a
CITROËN dealer can guarantee.

X
!
173
CHECKS

Screenwash and headlamp
wash fluid

Fluid specifi cation
For optimum cleaning and to avoid
freezing, this fl uid must not be topped
up or replaced with plain water.
Reservoir capacities:


-
screenwash: approximately 3.5 litres,


- screenwash and headlamp wash:
approximately 6.15 litres.












Diesel additive level
(Diesel engine with particle
emission filter)

Topping up
This additive must be topped up by
a CITROËN dealer or a qualifi ed
workshop without delay.











Used products

Avoid prolonged contact of
used oil or fl uids with the
skin.
Most of these fl uids are harmful to
health or indeed very corrosive.
Do not discard used oil or
fl uids into sewers or onto the
ground.
Take used oil to a CITROËN dealer
or a qualifi ed workshop (France) or
to an authorised waste disposal
site. In the case of vehicles fi tted
with headlamp washers, the
minimum level of this fl uid
is indicated by an audible
signal and a message in the multi-
function screen.
Top up the level when you stop the
vehicle.

Coolant level


Coolant change
The coolant does not have to be
changed.

Fluid specifi cation
The coolant must conform to the
manufacturer's recommendations.
The coolant level should be
close to the "MAX" mark but
should never exceed it.
When the engine is warm,
the temperature of the coolant is
regulated by the fan. This can oper-
ate with the ignition off.

On vehicles which are fi tted with
a particle emission fi lter, the fan
may operate after the vehicle has
been switched off, even if the en-
gine is cold.

In addition, as the cooling system is
pressurised, wait at least one hour
after switching off the engine before
carrying out any work.
To avoid any risk of scalding, un-
screw the cap by two turns to
allow the pressure to drop. When
the pressure has dropped, remove
the cap and top up the level. The additive reservoir
low level is indicated
by fi xed illumination
of this warning lamp,
accompanied by an audible warning
and a message in the multifunction
screen.