buttons Citroen C6 DAG 2008 1.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2008, Model line: C6 DAG, Model: Citroen C6 DAG 2008 1.GPages: 216, PDF Size: 5.22 MB
Page 7 of 216
10
A
B
C
EFD
G21
IN BRIEF
FRONT SEATS
C. Adjustment of the backrest angle.
D. Adjustment of the backrest lum-bar support.
E. Seat height and slide adjust-ments.
F. Adjustment of the seat cushion angle.
G. Memorisation of dashboard adjustments:
- Driver's seat.
- Steering wheel.
- Exterior rear view mirrors.
- Head-up display.
You have the possibility to mem-orise two driving positionsusing buttons 1 and 2.
ELECTRIC ADJUSTMENTS
A. Adjustment of the backrest angle.
B. Controls for the heated seats.
5657
G E T T I N G S T A R T E D
The c o r r e c t p o s i t i o n i n g of the belt strap is through the middle of the shoulder. See "Seat belts".
To adjust the seat belt for height, compress the control and slide it in the desired direction.
SEAT BELT HEIGHT ADJUSTMENT
55
Manual adjustments
Page 26 of 216
34
II
B
AC
D
NIGHT DRIVING A fi r s t p r e s s on the DARK b u t t o n p u t s t h e d i s p l a y o n s t a n d b y . O n l y t h e t i m e a n d t h e t e m p e r a t u r e r e m a i n d i s p l a y e d .
A second press s w i t c h e s o f f t h e d i s p l a y a n d t h e i n s t r u m e n t p a n e l , e x c e p t f o r i n f o r m a t i o n c o n c e r n i n g :
T h e s p e e d i n d i c a t o r . T h e a u t o m a t i c g e a r b o x . C r u i s e c o n t r o l / S p e e d l i m i t e r i f t h i s h a s b e e n a c t i v a t e d .Note:
T e m p o r a r y l i g h t i n g o f t h e d i s p l a y f o r m o d i fi c a t i o n o f a u d i o - C D adjustments and air conditioning.The display lights up if any of the other buttons on the display is pressed. To revert to night driving, press just once on button DARK.DARKDARKAll the displays come on if there is an alert.A third press r e t u r n s y o u t o n o r m a l l i g h t i n g .
Page 55 of 216
58
II
21
M
M E M O R I S A T I O N
DRIVING POSITIONS MEMORISED VIA BUTTONS 1 AND 2
T o m e m o r i s e a d r i v i n g p o s i t i o n :a. P l a c e t h e i g n t i o n k e y i n "Drive" p o s i t i o n ( s e c o n d p o s i t i o n ) .b. M a k e y o u r a d j u s t m e n t s o f t h e seat , t h e steering wheel , t h e rear view mirrors a n d t h e Head-up Display.c. P r e s s s u c c e s s i v e l y o n button M then on button 1 ( fi r s t d r i v i n g p o s i t i o n ) o r 2 ( s e c o n d d r i v i n g p o s i t i o n ) .
T h e m e m o r i s a t i o n i s c o n fi r m e d b y a s o u n d s i g n a l .Note: The memorisation of a new driving position cancels and replaces the previous one.
T h e m e m o r i s a t i o n f u n c t i o n a l l o w s t o m a k e t h e f o l l o w i n g d a s h b o a r d a d j u s t m e n t s : D r i v e r ' s s e a t
S t e e r i n g w h e e l
E x t e r i o r r e a r v i e w m i r r o r s H e a d - u p d i s p l a y .
S e e " S t e e r i n g w h e e l a d j u s t m e n t " , " R e a r v i e w m i r r o r s " a n d " H e a d - u p Display".
Y o u h a v e t h e p o s s i b i l i t y t o m e m o -rise two driving positions u s i n g buttons 1 a n d 2.
Page 82 of 216
85
III
1
2a2b1
3a3b4
765
A U T O M A T I C A I R C O N D I T I O N I N G
The system has a differentiated adjustment for the driver's side and passenger's side, in terms of temperature and a i r d i s t r i b u t i o n . T h e a i r fl o w i s c o m m o n t o b o t h s i d e s .
Symbols and messages relating to the automatic air conditioning controls will display on the multifunction screen.
2. TEMPERATURE ADJUSTMENT
To adjust the temperature, press button 2a for the driv-er's side and button 2b for the passenger's side.
An adjustment around 21 will give you the optimum comfort level. However, depending on your preferences anywhere between 18 and 24 is quite usual.
Operating the air conditioning system on "AUTO" guar-antees good ventilation inside the cabin.Note: there may be a difference between the actual c a b i n t e m p e r a t u r e a n d t h e fi g u r e d i s p l a y e d .
This is the normal operating mode for the system. Depending on the temperature chosen, a press on this b u t t o n , c o n fi r m e d b y t h e l i g h t i n g o f t h e w a r n i n g l a m p , will automatically and simultaneously bring all the fol-lowing functions into play: A i r fl o w .
Cabin temperature.
Air distribution.
Exterior air intake/Air recirculation.
It is recommended to keep all the air vents open. Just by pressing any of the buttons, except for temperature 2a and 2b, you can change to manual mode. the warn-ing lamp goes out. The warning lamp goes off, and the automatic air intake function is deactivated.
Page 84 of 216
87
III
3a3b
4
A U T O M A T I C A I R C O N D I T I O N I N G
3. ADJUSTING THE AIR DISTRIBUTION
Successives or continuous presses on buttons 3a and 3b o r i e n t t h e fl o w o f a i r o n t h e d r i v e r ' s s i d e o r o n t h e passenger's side.
The symbol (arrows) corresponding to the orientation chosen is displayed on the multifunction screen:Windscreen and side windows.
Central, lateral and soft diffusion air conditioning vents (if open).
Passenger footwells."AUTO" automatic distribution.
Page 87 of 216
90
III
A
B
C
D
Deactivation
A press on any of the buttons B, C or D, deactivates the automatic operation of the rear air condition-ing.
the warning lamp on button A goes out.
Remark: If the air conditioning in the front of the cabin is stopped (function deactivated in the "Air conditioning" menu or via the con-trol 4 f o r a d j u s t i n g t h e a i r fl o w ) , then the rear automatic air condi-tioning is not available.
ADJUSTING THE AIR FLOW
If you press buttons B or D you increase or decrease t h e fl o w f o r the rear air conditioning.
The number of diode(s) lit up, c o m p o s i n g t h e s y m b o l f o r a i r fl o w (helix, situated between buttons Band D) expresses its power level.
T o d e a c t i v a t e t h e a i r fl o w a n d a i r distribution for the rear air condi-tioning, press successively on but-ton D so that all the diodes go out.
DISTRIBUTION TO FOOTWELLS/HEADS
Successive presses on button Cwill modify the distribution of the a i r fl o w .
Three directions are available:Passengers' heads.
Passenger footwells.Passengers' heads and footwells.
The arrow lit up indicates the dis-tribution of air chosen manually. In "AUTO" mode, no arrow lights up.
ADJUSTMENT OF THE FLOW OF AIR INTO THE STORAGE UNDER THE FRONT CENTRAL ARMREST
I f y o u c h o o s e a m a x i m u m fl o w of air in the rear by pressing Band distribution towards passen-ger's heads by pressing C, having closed the rear air vents, you will o b t a i n a m a x i m u m fl o w o f a i r i n t o the storage beneath the armrest.
Page 88 of 216
91
III
The programmable heating sys-tem operates independently of the engine.
With the engine off, it is used to preheat the engine cooling system so as to have an optimum engine operating temperature on starting.
The programmable heating sys-tem is started using a long-range remote control. It can be started immediately or programmed to start later.
In the event of a malfunction of the programmable heating sys-tem, contact a CITROËN dealer.the programmable heating sys-programmable heating
Remote control
The remote control for the program-mable heating system includes the following buttons and display infor-mation:1. Menu function scroll buttons.2. Function symbols: clock, temperature, operating duration, programmed time, heater operation, heater control.3. Digital display of: time, temperature, operating duration, programmed time or heating level.4. Off button.5. On button.
Information displayed in the remote control screen
Display of functions
Press buttons 1 repeatedly to bring up the functions.
T h e fi r s t p r e s s o f t h e r i g h t o r l e f t button displays the time.
The left button then gives access to the programming time, then the heating level (C1 to C5).
The right button gives access to the cabin temperature, then the operating duration of the heater where the system is to be started immediately.
Information on the cabin tem-perature is only available with the engine off.
P R O G R A M M A B L E H E A T I N G
Page 89 of 216
92
III
Setting the timeImmediate startAdjusting the operating duration
After displaying the time, using buttons 1, within 10 seconds press buttons 4 and 5 simultaneously
Press button 5 (ON) until the "OK"message appears.
When the signal has been received, the "OK" message is displayed together with the operating dura-tion.
Press buttons 1 to display the oper-ating duration.
P R O G R A M M A B L E H E A T I N G
T h i s s y m b o l fl a s h e s .
Set the time using buttons 1. Press buttons 4 and 5 simultaneously to store the setting.
This symbol is displayed (constant).
The heater starts and this symbol is displayed.
To stop operation, press button 4 (OFF) until the "OK" message appears
This symbol goes off.
If the "FAIL" message appears dur-ing these operations, this indicates that the signal was not received. Go to a different location and then repeat the procedure.
This symbol is displayed.
After displaying the operating dura-tion, within 10 seconds press but-tons 4 and 5 simultaneously.
T h i s s y m b o l fl a s h e s .
Set the duration using buttons 1(adjustment in steps of 10 mins up to a maximum of 30 mins).
Press buttons 4 and 5 simultane-ously to store the duration setting.
This symbol is displayed (constant).
The factory setting is 30 minutes.
Page 90 of 216
93
III
Programming the heaterActivation - deactivation Stopping the heater
You should programme your depar-ture time so that the system can automatically calculate the opti-mum start time for the heater.
Programming your departure time
The "HTM" symbol stays on.
P R O G R A M M A B L E H E A T I N G
Press buttons 1 to display the pro-gramme time.
This symbol is displayed.
After displaying the programme time, within 10 seconds press but-tons 4 and 5 simultaneously.
T h i s s y m b o l fl a s h e s .
Adjust the time by pressing buttons 1 and press buttons 4 and 5 simul-taneously to store the setting.
This symbol is displayed (constant).
When the signal has been received, the "OK" mes-sage is displayed together with the "HTM" symbol.
This symbol is displayed when the heater starts.
After displaying the programme time using buttons 1, press button 5 (ON) until the "OK" message appears.
HTM: Heat Thermo Management (heater control system).
To cancel a programme, press but-ton 5 (OFF) until the "OK" mes-sage appears
The "HTM" symbol goes off.
If the "FAIL" message appears dur-ing these operations, this indicates that the signal was not received.
Go to a different location and then repeat the procedure.
Press button 5 (ON).
M o d i fi c a t i o n o f t h e h e a t i n g level
The system offers 5 levels of heat-ing (C1, the lowest level, to C5, the highest level).
After displaying the heating level using buttons 1, press buttons 4 and 5 simultaneously.
The letter "C" fl a s h e s .
Adjust the level of heating using buttons 1.
Press buttons 4 and 5 simultane-ously to store the level setting cho-sen. The letter "C" is displayed (constant).
The factory settings are replaced by the new values entered. The times programmed are memorised u n t i l t h e n e x t m o d i fi c a t i o n .
When the departure time is acti-vated, it is not possible to modify the heating level. The departure t i m e s h o u l d fi r s t b e d e a c t i v a t e d .
Page 103 of 216
106
III221
2
2
I N T E R I O R L I G H T I N G
Front
INTERIOR LAMPS
1. Interior lamps
A press on button 1 of the front interior lamp, switches the interior lamps on or off.
Switching on and off is progressive after an action on the remote con-trol, but immediate after a press on button 1.
Rear
2. Spotlamps
A press on one of the buttons 2switches the corresponding spot-lamp on or off.
These only work when the ignition is switched on.
Automatic lighting of the interior lampsThey come on when you remove the ignition key, unlock the vehicle or open a door.
They go out progressively when the doors are closed, the vehicle locked or the ignition switched on.
Deactivation/Activation of automatic lighting
A long press on button 1, deacti-vates the operaton of the inerior lamps. To reactivate them, press on the same button.
Changing bulbsTo change a front interior lamp bulb: Detach the transparent screen. Use a bulb W 5 W.
To change a rear interior lamp bulb: Detach the two surrounds of the transparent screen and pull it away. Use a bulb W 5 W.