display Citroen C8 DAG 2008 1.G Owner's Guide
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2008, Model line: C8 DAG, Model: Citroen C8 DAG 2008 1.GPages: 194, PDF Size: 4.97 MB
Page 58 of 194
1
II
T h e s e a c t i o n s d o n o t c a n c e l t h e c r u i s e s p e e d w h i c h
remains displayed on the screen.
Reactivation of cruise control
- By recalling the memorised cruise speed:
After a deactivation, press button 3.
Your vehicle returns automatically to the memorised
c r u i s e s p e e d w h i c h i s d i s p l a y e d o n t h e i n s t r u m e n t
panel screen B.
If the memorised cruise speed is higher than the speed
a t w h i c h y o u a r e c u r r e n t l y t r a v e l l i n g , t h e v e h i c l e w i l l
accelerate strongly to compensate.
- By selection of the current speed:
P r e s s b r i e l y on button 2 or 4 w h e n y o u a r e a t y o u r
desired speed.
The information “OFF” w i l l t h e n d i s a p p e a r f r o m t h e
screen.
To cancel the function
- By moving the control from “CRUISE” position to
position 0.
- By stopping the engine.
The speed previously chosen is no longer
memorised.
In the event of a malfunction , a message is displayed,
accompanied by a sound signal and lighting of the
S E R V I C E w a r n i n g l a m p .
Consult your CITROËN dealer.
Cruise control must only be used where road conditions permit driving at a constant speed.
Do not use it on congested roads or when weather and ro ad conditions are poor.
The driver must still remain attentive and in complete co ntrol of the vehicle.
You are recommended to keep your feet within range of the pedals.
To exceed the cruise speed temporarily
While cruise control is operating, it is still possible to
go above the cruise speed by actioning the accelerator
pedal (for example to overtake another vehicle). The
s p e e d d i s p l a y e d o n t h e s c r e e n l a s h e s . Y o u h a v e
only to release the accelerator pedal to return to the
memorised speed.
Adjusting the cruise speed while cruise control is
in operation
You can adjust the cruise speed,
displayed in zone B,
by pressing:
- Button 4 to increase the speed.
- Button 2 to reduce the speed.
Note: you can use successive presses to modify the
cruise speed in steps of 1 mph and a continuous press
to jump in steps of 5 mph.
Deactivation of cruise control with memorised
speed
- E i t h e r w i t h a p r e s s o n t h e b r a k e p e d a l o r c l u t c h pedal.
- Or if ESP or ASR are activated.
- O r w i t h a p r e s s o n b u t t o n 3.
Note: c r u i s e c o n t r o l i s d i s e n g a g e d w h e n t h e g e a r l e v e r
is in neutral position.
These actions bring up the dis-
play “OFF” in the instrument
panel screen. C R U I S E C O N T R O L
Page 59 of 194
2 II
T h i s d r i v i n g a s s i s t a n c e d e v i c e a l l o w s y o u t o c h o o s e a m a x i m u m s p e e d .
This has to be over 30 km/h (approx. 20 mph).
Control
A f o r t h e s p e e d l i m i t e r i s s i t u a t e d b e l o w t h e l i g h t i n g / s i g n a l l i n g
control stalk.
Note: The information relating to the speed limiter is displayed in the
instrument panel screen at B.
To select the function
Turn control 1 to position “LIMIT”.
On selection of the function via control 1, the last
speed memorised is displayed.
The information “OFF” then disappears from the
screen.
To adjust the maximum speed
Provided the engine is running, you can adjust the memorised spe
ed by
pressing:
- button 4 to increase the memorised speed,
- button 2 to decrease the memorised speed.
Note: you can use successive presses to modify the cruise speed in steps
of 1 mph and a continuous press to jump in steps of 5 mph.
To activate the speed limiter
If the desired limit speed is displayed, press button 3 to activate this limit.
W h i l e t h e f u n c t i o n i s a c t i v e , p r e s s i n g t h e a c c e l e r a t o r p e d a l w i l l n o t e n a b l e
you to go beyond the programmed speed unless you press the pedal
h a r d d o w n p a s t t h e t i g h t s p o t ( s e e “ T e m p o r a r y e x c e e d i n g o f t h e m a x i m u m
speed”).
Note: The vehicle speed may vary slightly from that memorised. S P E E D L I M I T E R
Page 60 of 194
3
II
To deactivate the speed limiter
Press button
3 located on the end of control A.
A mat not approved by CITROËN risks sliding under the a ccelerator pedal, thus preventing you
from pressing past the tight spot.
It will then be impossible to exit from your speed limita tion, unless by resorting to the control
under the steering wheel.
The driver must still remain attentive and in complete co ntrol of the vehicle.
This action causes the information
“OFF” to appear in the instrument panel screen.
The memorised speed remains displayed and is not cancelled.
Temporary exceeding of the maximum speed
Y o u c a n e x c e e d t h e m e m o r i s e d m a x i m u m s p e e d a t a n y t i m e b y p r e s s i n g t h e a c c e l e r a t o r p e d a l h a r d d o w n p a s t t h e
tight spot.
D u r i n g t h e t i m e t h e l i m i t s p e e d i s b e i n g e x c e e d e d , t h e d i s p l a y e d s p e e d l a s h e s .
S i m p l y r e l e a s e t h e a c c e l e r a t o r p e d a l t o r e t u r n b e l o w t h e l i m i t s p e e d a n d m a k e t h e f u n c t i o n a c t i v e a g a i n .
Note: if during use of the speed limiter the system is not able to retain the memorised speed (e.g. on a steep
d e s c e n t ) , t h e n t h e s p e e d l a s h e s . I f n e c e s s a r y , a d j u s t y o u r d r i v i n g s p e e d .
T h e f u n c t i o n w i l l r e - e n g a g e w h e n y o u r s p e e d i s a g a i n b e l o w t h e d e s i r e d l i m i t s p e e d .
To cancel the function
- By moving the control from position “LIMIT” to position 0.
- By stopping the engine.
The speed previously chosen is memorised.
In the event of a malfunction , a message is displayed, accompanied by a sound signal and lig hting of the
S E R V I C E w a r n i n g l a m p . C o n s u l t y o u r C I T R O Ë N d e a l e r . S P E E D L I M I T E R
Page 61 of 194
6 4 II
Proximity sensors are located in
the
front and/or rear bumpers of
your vehicle.
W h e n m o v i n g f o r w a r d s o r
r e v e r s i n g , a t a s p e e d l o w e r t h a n
approx. mph, they inform you of
the presence of obstacles located
in their detection zone by :
- a sound signal emitted by the front and/or rear speakers,
- the display of the vehicle outline w i t h b a r s c o r r e s p o n d i n g t o t h e
z o n e s w h e r e a n o b s t a c l e i s
detected.
When the vehicle approaches
an obstacle, the sound signal
indicates the position of the
o b s t a c l e a c c o r d i n g t o w h e t h e r
the sound is emitted from the
front / rear left hand / right hand
speaker. - When the vehicle approaches
the obstacle, the sound signal
becomes more and more rapid
and the bars are seen to move
ever nearer to the vehicle.
- When the obstacle is less than 25 cms from the rear of the ve-
hicle, the sound signal becomes
c o n t i n u o u s a n d a w a r n i n g m e s -
sage appears on the display.
NaviDrive Version
Display type C and
Monochrome NaviDrive Version
P A R K I N G A S S I S T A N C E
Activation /
Deactivation
You can activate/deactivate
parking assistance by pressing
the button on the dashboard. If
parking assistance is inactive, the
w a r n i n g l a m p i s l i t .
The activation or deactivation of
parking assistance is memorised
w h e n y o u s t o p t h e v e h i c l e .
Note : The system is automatically
deactivated if a trailer is attached
to the vehicle.
T h e i t t i n g o f t h e t o w b a r m u s t b e
carried out by a CITROËN dealer.
Page 62 of 194
5
II
Operation :
-
when you engage reverse gear , a sound signal informs you that the system is active. The vehicl e outline
a p p e a r s o n t h e d i s p l a y . O b s t a c l e s l o c a t e d t o t h e r e a r o r i n f r o n t o f t h e v e h i c l e w i l l b e d e t e c t e d .
- when moving forward a t a s p e e d l o w e r t h a n a p p r o x . 6 m p h , e i t h e r i n n e u t r a l o r i n g e a r , t h e v e h i c l e o u t l i n e
appears on the display as soon as an obstacle is detected in f ront of the vehicle. Obstacles located in front of the
v e h i c l e w i l l b e d e t e c t e d .
Notes :
- T h e p r o x i m i t y s e n s o r s c a n n o t d e t e c t o b s t a c l e s l o c a t e d j u s t b e l o w o r a b o v e t h e b u m p e r s .
- A t h i n o b j e c t s u c h a s a s p i k e , a b o l l a r d o r o t h e r s i m i l a r o b j e c t , w i l l o n l y b e d e t e c t e d a t t h e s t a r t o f t h e m a n o e u v r e
b u t n o t w h e n t h e v e h i c l e i s u p c l o s e t o i t .
- I n b a d w e a t h e r a n d i n w i n t e r , e n s u r e t h a t t h e s e n s o r s a r e n o t c o v e r e d b y d i r t , i c e o r s n o w .
P A R K I N G A S S I S T A N C E
When engaging reverse gear, a short sound signal foll owed by
a different sound signal accompanied by a message and the lighting
of the SERVICE warning lamp, indicates that there is a malfunc tion.
Page 71 of 194
74 III
2 - Automatic operation A U T O M A T I C A I R C O N D I T I O N I N G
T h i s i s t h e n o r m a l o p e r a t i n g m o d e .
A p r e s s o n t h i s b u t t o n , c o n i r m e d b y a s n o w l a k e o n
t h e d i s p l a y w i t h t h e t e x t A U T O , a l l o w s a l l t h e f o l l o w i n g
5 f u n c t i o n s t o b e a u t o m a t i c a l l y m a n a g e d i n l i n e w i t h
t h e t e m p e r a t u r e s e l e c t e d :
- F l o w o f a i r .
- C a b i n t e m p e r a t u r e .
- D i s t r i b u t i o n o f a i r .
- A i r c o n d i t i o n i n g .
- R e c y c l i n g o f a i r .
T o e n a b l e t h e s y s t e m t o o p e r a t e , a l l t h e a i r v e n t s
s h o u l d b e k e p t o p e n .
T o r e v e r t t o m a n u a l m o d e , p r e s s a g a i n o n t h e b u t t o n .
Note:
- W h e n s t a r t i n g f r o m c o l d , i n o r d e r t o a v o i d d i s t r i b u t i n g t o o m u c h c o l d a i r , t h e b l o w e r b u i l d s u p t o i t s n o r m a l
s p e e d p r o g r e s s i v e l y a s t h e e n g i n e w a r m s u p .
- A n a i r l o w o f z e r o w i l l p r e v e n t t h e s y s t e m f r o m w o r k i n g a n d w i l l s t o p t h e w h o l e o f t h e a i r c o n d i t i o n i n g
s y s t e m .
1 - Display
Page 113 of 194
11 IV
After a lengthy disconnection of the battery, it may be necessa
ry to reinitialise the following functions:
- the electric windows anti-pinch and sequential systems,
- the sun roof anti-pinch system,
- the multifunction display parameters (date, time, language, units of distance and temperature),
- the radio stations,
- the navigation reception (see NaviDrive instructions).
W A R N I N G : i f d i s c o n n e c t i n g t h e b a t t e r y , c h e c k t h a t t h e n a v i g a t i o n r e a d e r h a s i n i s h e d r e c o r d i n g i n f o r m a t i o n
after switching off the ignition : the warning lamp should h ave gone out.
S t a r t i n g t h e e n g i n e f o r t h e i r s t t i m e a f t e r d i s c o n n e c t i n g a n d
connecting the battery
- Turn the ignition key.
- Wait about a minute before operating the starter to allo
w the electronic
systems to be reinitialised. B A T T E R Y
Page 140 of 194
22
1
9
11
53
8
6724
10
D E S C R I P T I O N O F T H E C O N T R O L S
It is recommended that you do not use the NaviDrive controls while your vehicle is moving. In some countries, certain commands may be deactivated to comply with national regulations.
1CD eject.
2Call in progress:Shor t press: End a call.
3Shor t press: Answer call.Display of telephone menu.
4Shor t press: Access to the CITROËN ser vices menu.Long press: Direct call to the CITROËN assistance ser vice.
5CD aper ture.
6
Shor t press:Cancellation of the current operation.Deletion of a superimposed display.Long press:Close main menu and return to the welcome screen.
Page 142 of 194
44
21
192018
2223
24
17
D E S C R I P T I O N O F T H E C O N T R O L S
19Shor t press: O n / O f f f o r T A t r a f fi c i n f o r m a t i o n ( T r a f fi c A n n o u c e m e n t s ) .Long press: On/Off for PT Y programme type (Program Type).
20Press: On / Off.Rotate: Volume adjust.
21
Shor t successive presses:One press: Only the top par t of the display remains lit.Two presses: Display off (blank display).Three presses: Return to the standard display.Long press (more than 10 seconds: Re-initialisation of the system.
Page 144 of 194
66
A
D ESCRIPTIO N O F TH E CO NTRO LS
ADDITIONAL CONTROL (C ONLY)
The “ESC” buttonShor t press: Cancel the current operation or delete a superimposed display.L o n g p r e s s: Ret u r n t o t h e p e r m a n e nt display.
The “MENU” buttonShor t press: At any time, access to the Main menu.Long press: At any time, access to the Help menu.In certain countries, this control is deacti-vated while the vehicle is moving.
The “MUSIC” buttonShor t press: Display of shortcut menu for the current audio source.
The “TEL” buttonShor t press: Display of shortcut menu for the telephone function, and to pick up an incoming call.
The “NAV” buttonShor t press: Display of the shortcut menu for the navigation function.
The “MAIN” buttonShor t press: Display of general informa-tion.
To access certain functions without needing to use the NaviDrive buttons, or to access the shortcut menus for certain functions.
The control AThis has two functions:By rotation, it allows you:To move in the display in order to choose a function, a parameter or a value.To decrease or to increase a value you wish to adjust.To scroll through the components you can select when a list is displayed.To modify the scale of the map on the screen.By pressing, it allows you:To access shortcut menus for certain functions of the application, displayed on the right hand side of the screen.To validate the function chosen or t h e v a l u e m o d i fi e d .To select a parameter such as “lectadjust” or “list”, to be able to modify it.
The “MODE” buttonShor t press: For selection of the type of information to be displayed on the right of the screen (Radio, Navigation, Trip computer, etc.).Long press: Display of general informa-tion.