display CITROEN DS3 2009 User Guide

Languages Once the "Lan
guages" menu has been
selected, you can change the language used
by the display (Français, Italiano, Nederlands,
Portugues, Portugues-Brasil, Deutsch, English, Espanol
).
Units
Once the "Units" menu has been selected,
you can change the units o
f the
following
parameters:
- temperature (°C or °F),
- fuel consumption (l/100 km, mpg or km/l).
Once the fuel consumption units have been set to mp
g, the information in the
instrument
pane
l screen on s
peed an
d
distance w
ill also
be in m
ph an
d miles.

For sa
fety reasons, con
figuration by the
driver of the multifunction screen mustonly be done when stationary.
Display settings Once the "Display settings" menu has been selected, you can gain access to the following settings:
- year,- month
,
- day, - hour
,
- minutes,- 12
or 24 h
our m
ode
.
)
Once you have selected a setting, press the "  " or " 
" buttons to change its value.
)
Press the "
 " or " " buttons to switch
respect
ively to t
he prev
ious or next sett
ing.
)
Press the
"OK" button to save t
he c
hange
and return to the normal display or press
the
"ESC" button to cancel.

51
Multifuntion screens
"P
erso
nalisat
ion-
Configuration" menu

Once this menu has been selected, you can gain access to the following functions: - define the vehicle parameters, - display configuration, - choice of language. 
'H
¿QHWKHYHKLFOHSDUDPHWHUV

Once this menu has been selected, you can activate or deactivate the following equipment: - wiper linked to reverse gear (refer to the
"Visibilit
y" section
),
- "guide-me-home" lighting - parking assistance
(refer to the "Driving"
section).
Example: setting of the duration of the "guide-
me-home" lighting ) Press the "
"
or "" buttons
, then the
"
OK" button to select the menu required.
)
Press the "
" or "" buttons, t
hen t
he
"
OK"
button to select the "
Guide-me-home
headlamps" line.
)
Press the "
" or
" " buttons to set t
he
value required
(15, 30 or 60 seconds
), then
press the
"OK"button to con
firm.
) Press t
he "  " or
"  " buttons, t
hen t
he
"OK"button to se
lect t
he "OK"
box an
d
confirm or press the
"ESC" button to
cancel.

53
Multifuntion screens

16/9 colour screen (MyWay) It displays the following information automatically and directly: - t
ime,
- date,
- altitude, - ambient temperature (the value displayed
flashes if there is a risk of ice),
- check of the doors
,
- warning and vehicle function status
messages, displayed temporarily,
- audio functions
,
- satellite navigation system information.
Displa
ys on the screen
MyWa
y To select one of the applications, at the
control panel: ) press t
he dedicate
d "RADI
O" , "M
US
IC",
"NAV"
, "TRAFFI
C", "SETUP"
or
"PHONE"

button
for access to the
correspon
ding menu,
) turn the dial to change the selection,
) press the dial to confirm the selection,
or )
press the
"ESC
"button to aba
ndon th
e
current operation and return to the previous display.
Controls

For fur ther information on these applications,
refer to the "Audio and Telematics" sec
tion or
to the speci
fic user
guide
given to
you with the
other owner
's documents.

Digital air conditioning The air conditioning can only operate when the engine is running. Automatic operation1. Automatic "comfort"
programme
Press t
he "A
UTO"button.
The
"AU TO "
symbol is displayed.
We recommend that you use this mode. It provides optimised
automatic control of all of the followin
g
functions: passen
ger compartment
tem
perature, air
flow, air distribution and air
intake, in accordance with the comfort value that you
have c
hosen.
This system is designed to operate e
ffectively
in all seasons
, with the windows closed.
For
your comfort, when the en
gine is
switched o
ff, the settin
gs are retained
until the en
gine
is sw
itched on a
gain.
To prevent too
great a distribution o
f
cold air w
hen t
he en
gine
is co
ld, the a
ir
flow will only reach its optimum level gradually.

2. Temperature adjustment The va
lue
indicate
d on t
he display correspon
ds
to a level o
f com
fort and not to a tem
perature in
degrees
Celsius or Fahrenheit.

On enterin
g the vehicle, if the interio
r
is ver
y co
ld or
hot, t
here
is no nee
d to
change the va
lue
displayed in or
der
to reach the re
quired level o
f com
fort.
The s
ystem corrects t
he temperature
difference automatically and as quickly
as possible.

Pr
ess
the "" and "" buttons to
chan
ge this value. A settin
g around
t
he value
21
ena
bles o
ptimum
com
fort to be obtained. However,
depen
ding on
your requ
irements, a
setting between 18 and 24 is usual.
 $XWRPDWLFYLVLELOLW
\
pro
gramme The automatic com
fort pro
gramme
may not be su
fficient
for rapid
demistin
g or de
frostin
g of the
windscreen an
d side w
indows
(humidity, several passengers, ice, etc.
).
In this case, select the automatic visibility
programme. The button
3
indicator lamp comes on.
The system automatically controls the air
conditionin
g and the flow of air and provides
o
ptimum a
ir distribution to t
he w
indscreen an
d
side
windows. It deac
tivates air recircula
tion 5.
To ex
it this pro
gramme, press
button
3again
or "AU TO "
, the indicator lamp on the button is"
switched o
ff and
"AUTO"is displaye
d.

67
Comfort
It is possible to adjust one or more functions manually while leaving the other functions in automatic mode.
The "AU TO "
symbol switches off.
To return to automatic mode, press the
"AU TO "
button.
0
DQXD
ORYHUUL
GH

4. Air conditionin
g on/o
ff

For maximum cooling or heating o
f the
cabin, it is possible to go beyond the minimum
14 or maximum
28 values.
) Press the blue button
2 until
"LO"
is displayed or the red button
2until
"HI"

is displa
yed.
Pr
ess
this button to switch off the air
conditioning.

Stopping the air conditioning may cause
some problems
(humidity, misting
).

Automatic operation of the air conditioning is resumed when the button is pressed again. The
symbol "A /C
"is displayed.
5. Air in
take/Air r
ec
ircu
lation
Press
thi
s button for recirculation of
t
he inter
ior a
ir. The a
ir rec
ircu
lation
sym
bol 5 is displaye
d.

Air rec
ircu
lation ena
bles t
he
passenger compartment to be isolated from
exterior odou
rs and smoke.
Press this button again or press the
"AUTO"
button to resume automatic mana
gement of the
intake o
f air. The air recirculation s
ymbol
5is
switched off.
Avoid prolonged recirculation o
f interior
air
(risk o
f condensation or deterioration
of the air quality).
Switching to manual mode may not besuitable
(temperature, humidity, odour,
condensation) and does not provide optimum comfort.

97
Visibility

Model without AUTO lighting
Model with AUTO lighting
M
anua
l co
ntrols
The ligh
ting comman
ds are
issue
d direct
ly by
the driver by means o
f the ring
A
and the stalk A
B.
Automat
ic lighting.
B. Stalk for switchin
g the headlamp beam:
pull the sta
lk to sw
itch between
dipp
ed an
d
ma
in beam
headlam
ps.
In the lam
ps o
ff and sidelam
ps modes, the
driver can sw
itch on t
he ma
in beam
headlam
ps
temporarily ("headlamp flash") by maintaining apull on the stalk.A. Main lighting mode selection ring: turn itto position the s
ymbol required facin
g the
mark.

Lam
ps o
ff.

Sidelamps only.

Dipped headlamps or main beam
headlamps.
Displays
Lightin
g of the correspondin
g indicator lamp on
the instrument panel con
firms the switching on
of the lighting selected.

The instrument panel has permanent back-
lighting. Illumination of the instrument panel is
therefore not linked to the exterior lighting.

switched on automatically, without any action on the part of the driver, when a low level of external li
ght is detected or in certain cases of
activation o
f the windscreen wi
pers.

As soon as the brightness returns to a sufficient level or after the windscreen wipers are switched off, the lamps are switched off automatically. Automatic illumination o
f headlam
ps

Activation)
Turn ring
Ato the A
"AUTO"
position. The automatic
illumination of headlamps is accompanied by a
message on the multifunction screen.
Deact
ivation
) Turn ring
Ato a position other than
"AU TO " . Deactivation is accompanied by a
message on the multifunction screen.
Couplin
g with the automatic
"G
uide-me-home" li
ghtin
g
Assoc
iation with th
e automatic illumin
ation of
headlamps provides "
guide-me-home" li
ghtin
g
with the followin
g additional options:
- selection of the li
ghtin
g duration to
15, 30 or 60 seconds in the vehicle
parameters on the multi
function screen
configuration menu
(except in the case o
f
the monochrome screen A
, for which the
duration is set: 60 seconds),
- automatic activation of "guide-me-home" lightin
g when automatic li
ghtin
g is in
operation.
Operating
fault
In th
e event of a fau
lt with th
e
brigh
tness sensor, t
he ligh
ting
come on, t
his warn
ing lamp
is displayed on the instrument panel and
/or a
message appears on the multifunction screen, accompanied by an audible signal.
Consult a CITROËN dealer.

In fog or snow, the brightnesssensor ma
y detect sufficient li
ght.
Therefore, the li
ghtin
g will not come on
automat
ically.
Do not cover t
he brigh
tness sensor,
cou
pled with the ra
in sensor an
d
located in the centre o
f the windscreen
behind the rear view mirror
; the
associated functions would no longe
r
be controlled.

Auxiliary socket This connection box, consisting of a JACK soc
ket is loca
ted on th
e centre console.
It permits the connection of portableequipment, such as a digital audio player of theiPod
®type.
It reads the audio
file formats
(mp3, ogg,
wma, wav, ...
) which are transmitted to your
audio equipment and played via the vehicle's speakers.
You can manage these files using the steering wheel controls or the audio equipment control panel and display them on the multifunction screen
.
USB Player
Wh
en
it is in use, t
he porta
ble
equipment charges automatically.
Wh
en
it is in use, t
he porta
ble
equ
ipment c
harges automat
ically.
For more information on the use of this
equipment, refer to the MyWay or Audio system part of the "Audio and Telematics" section.
This connection box, consisting of a JACK
socket and a USB port, is located on the centre console. It permits the connection o
f portable
equipment, such as a di
gital audio pla
yer o
f the
iPod
® or USB stick type. ®
It reads the audio
file formats
(mp3, ogg,
wma, wav...) which are transmitted to your
audio equipment and played via the vehicle's
speakers. You can mana
ge these files usin
g the steerin
g
w
heel contro
ls or t
he au
dio e
quipment contro
l
panel and displa
y them on the multi
function
screen
.
For more information on the use of this
equipment, refer to the Audio system part of the
"Audio and Telematics" sec
tion.
12 V accessories
socket )
To connect a 12 V accessory (max power: 120 Watts), remove the cover and connect a suitable adaptor.

Gear change indicator * OperationThe system inter venes only when drivingeconomically. Dependin
g on the drivin
g situation and
your
vehicle's equ
ipment, t
he s
ystem ma
y advise
you to s
kip one or more
gears.
You can
follow this instruction without engaging the interme
diate gears.
The gear engagement recommendations must not be considered compulsory. In fact, the configuration of the road, the amount of traffic and safety remain determining factors when choosing the best gear. Therefore, the driver remains responsible
for decidin
g whether or not
to follow the advice given by the system. This function cannot be deactivated.
-
The s
ystem ma
y su
ggest t
hat you en
gage a
hi
gher
gear, i
f appropriate. The information appears in the form of an arrow on
the instrument panel display.
Dependin
g on
your vehicle's equipment, this arrow
may be accompanied b
y the recommended
gear.

In the case of drivin
g which makes
particular demands on the
performance
of the en
gine
(firm pressure on the
accelerator
pedal,
for exam
ple, when
over taking...
), the system will not
recommen
d a gear c
hange.
The system never suggests: - engaging first gear, - engaging reverse gear, - en
gaging a lower
gear.
* According to engine.

Example: -
You are
in third gear.
-
You
press t
he acce
lerator
pedal
mo
derate
ly.

When you move the lever in the gate to select a position, the corresponding indicator is displayed on the instrument panel. P. Park
R.Reverse
N. Neutra
l
D. Drive
(Automatic driving
)
S. Spor
tprogramme
7.Sno
w
programme
1, 2, 3, 4
.Gear engaged during manual operation
-.Invalid value during manual operation Displays on the instrument panelFoot on brake
)
Press the brake pedal when this indicator
lamp
is displaye
d on t
he
instrument panel (e.g.: starting the engine).

Movin
g off
If position
Nis en
gaged inadver tent
ly
whil
e driving, a
llow t
he eng
ine to
return to
idle then engage pos
ition
Dto
accelerate.
Wh
en t
he eng
ine
is runn
ing at
idle, w
ith
the brakes released, i
f position
R , D or
M
is selected
, the vehicle moves even
without the accelerator being pressed.
When the engine is running, neve
r
lea
ve children in th
e vehicle with
out
superv
ision.
Wh
en carr
ying out ma
intenance w
ith
the en
gine runn
ing, app
ly the par
king
brake an
d se
lect
position
P. P
) Apply the par
king
brake.
)
Select position
P or N.
)
Start the engine.
If this procedure is not followed, an audible
signal is heard, accompanied by a message on the multifunction screen.
) With the en
gine runn
ing, press t
he brake
pedal.
) Release t
he par
king brake.
) Select position
R , Dor M ,
) Gradually release the brake pedal.
The vehicle moves off immediately.