warning CITROEN DS3 2009 User Guide

33
Instruments and controls
Warning lamp
is o
n
Cause
Action/Observations
Engine o
il
press
ure
fixed.

There is a
fault with the en
gine
lubricat
ion system.
Stop as soon it is sa
fe to do so.
Park, switch off the ignition and contact a CITRO
ËN
dealer.
Battery charge
fixed.
The battery charging circuit has a fault
(dirty or loose terminals, slack or cut
alternator belt, ...). This lamp should switch off when the engine is started.
If it does not switch off
, contact a CITROËN dealer.
Door(s) open
fixed if the speed is below 6 mph
(10 km/h
).
A door or the boot is still open. Close the door or boot.
fixed and accom
panied
by an au
dibl
e s
igna
l
if the speed is above 6 mph (10 km/h).

Airbag
s

temporarily.

This lam
p comes on
for a
few seconds
when you turn on t
he ignition, t
hen
switches off.

This lamp should switch o
ff when the en
gine is started.

If it does not switch off, contact a CITROËN dealer.

fixed. One of the airbag or seat belt
pretensioner systems has a fault. Have it checked by a CITROËN dealer.
Warning lamp
is on
Cause
Action/Observation
s
Seat
belt not
faste
ned/
unfaste
ned

fixed then flashing accompanied by an increas
ing au
dibl
e
s
igna
l. The driver and
/or the
front passen
ger
has not
fastened or has un
fastened
their seat belt.
Pull the strap t
hen
insert t
he ton
gue
in the buckle.
Power steer
ing
fixed. The power steerin
g has a
fault. Drive care
fully at reducd speed.

Have it checked by a CITRO
ËN dealer.

System which informs the driver whether theengine oil level is correct or not. Thi
s information is indicated for a few seco
nds
when the ignition is switched on, after the service in
formation.
En
gine oil level indicator
The level read will onl
y be correct i
f
the ve
hicle is on
leve
l groun
d an
d the
engine has been o
ff for more than
15 minutes.
Oil level correct
Lack of oil
This is indicated by the
flashing o
f "OIL" ,
linked
with the ser vice warning lamp, accompanied
by an audible signal and a message on the
multifunction screen.
If the lack of oil is confirmed b
y a check usin
g
the dipst
ick, it is essent
ial that t
he leve
l is
toppe
d up to prevent
dama
ge to t
he en
gine.
Oil level indicator faultThis is indicated b
y the
flashin
g of "OIL--
".
Consult a
CITR
OË
N dealer.

There are 2 marks on th
e
dipstick:-
A
= max; never excee
d this
level
(risk o
f dama
ge to the
engine),
-
B = m
in; to
p up the leve
l via
the oil filler cap, using the
grade of oil suited to your engine.
Dip
stick
Refer to the "
Checks" section to locate the
dipstick and the oil
filler cap on your engine.

49
Multifuntion screens

Monochrome screen C
This displa
ys the followin
g information:
- t
ime,
- date
,
- ambient temperature (this flashes if there is
a risk o
f ice
),
- status of doors and boot, - audio sources (radio, CD, USB port, jack
socket etc.),
- trip computer (refer to the "Instruments and
controls" section
).

Warning messages (E.g. "Emisions control
system faulty") or information messages (E.g.: Automatic headlamps active") may appear
temporar
ily. These can
be c
leare
d by press
ing
the "ESC"
button.

Displa
ys on the screen
From
your Audio s
ystem control panel,
you can:
)
press the
"MENU"
button to
gain access to
the
genera
l menu
,
) press t
he "  " or "
" buttons to scro
ll
throu
gh the items on t
he screen,
)
press t
he "MODE"
button to c
hange t
he
permanent application (trip computer, audio
source...),
) press the
"  " or "  " buttons to change a
setting value,
)
press the
"OK"button to confirm
,
or ) press t
he "ESC
"button to a
bandon t
he
operat
ion
in pro
gress.
Controls
) Press t
he "MENU"
button to ga
in access to
t
he genera
l menu :
- audio functions
,
- the trip computer,
- personalisation-configuration,
- telephone
(hands-free kit
).
) Press
the "  " or "  " buttons to selec
t the
menu required, then con
firm b
y pressin
g
t
he "OK" button.
Ge
neral m
enu

With the Audio system switched on, once this menu has been selected you can activate or deactivate the functions linked with use of the radio (RDS, REG, RadioText), the CD (introscan, shuffle, CD repeat) or the MP3 player (USB port /jack socket). For further details on th
e "Audio functions"
application , re
fer to the Audio s
ystem part o
f
t
he "Audio an
d Telemat
ics" sect
ion.

"Audio functions" men
u "Trip computer" menu
Once this menu has been selected, you can consult in
formation concerning the status o
f the
vehicle (warnings log, status of functions, etc.).

Alert log
This summarises the active warnin
g messa
ges,
displa
ying them in succession on the
m
ultifunction screen.
Status
of functions
This summarises the status
(active or inactive
)
of the vehicle's functions.
Enter
distance to
dest
inat
ion
Thi
s a
llows
you to enter an approx
imate
distance until
your
final destination.
)
Press
the "MENU"
button to
gain access to
t
he genera
l menu.
)
Press t
he arrows, t
hen t
he "OK"button to
select t
he "Trip computer
" men
u.
)
In the "Trip computer
" menu, se
lect one
o
f the
following applications:

53
Multifuntion screens

16/9 colour screen (MyWay) It displays the following information automatically and directly: - t
ime,
- date,
- altitude, - ambient temperature (the value displayed
flashes if there is a risk of ice),
- check of the doors
,
- warning and vehicle function status
messages, displayed temporarily,
- audio functions
,
- satellite navigation system information.
Displa
ys on the screen
MyWa
y To select one of the applications, at the
control panel: ) press t
he dedicate
d "RADI
O" , "M
US
IC",
"NAV"
, "TRAFFI
C", "SETUP"
or
"PHONE"

button
for access to the
correspon
ding menu,
) turn the dial to change the selection,
) press the dial to confirm the selection,
or )
press the
"ESC
"button to aba
ndon th
e
current operation and return to the previous display.
Controls

For fur ther information on these applications,
refer to the "Audio and Telematics" sec
tion or
to the speci
fic user
guide
given to
you with the
other owner
's documents.

Front demist - defrost :LWKWKHKHDWLQ
J
YHQWLODWLRQ
system )
Put the temperature and air flow controls to the dedicated marked position.
)
Put th
e air int
ake control to the "Ext
erior air
intake" position (manual control to the right or electriccontrol with indicator lamp o
ff).
)
Put t
he a
ir distribution contro
l to t
he
"Wi
ndscreen
" position.
These markings on the control panel indicate the
control positions for rapid demistin
g or
defrostin
g of the windscreen and side windows.
:L
WKWKHPDQXD
OD
LU
con
di
tion
ing system
)
Put the temperature and air flow controls to the dedicated marked position.
)
P
ut th
e air int
ake control to the "Ext
erior air
intake" position

(manual control to the ri
ght or electric
control with indicator lamp o
ff).
) Put t
he a
ir distribution contro
l to t
he
"Wi
ndscreen
" position.
) Switch on the air conditioning by pressingthe
"A /C "
button; the associated green
warning lamp comes on.

Front demist - defrost :LWKWKHKHDWLQ
J
YHQWLODWLRQ
system )
Put the temperature and air flow controls to the dedicated marked position.
)
Put th
e air int
ake control to the "Ext
erior air
intake" position (manual control to the right or electriccontrol with indicator lamp o
ff).
)
Put t
he a
ir distribution contro
l to t
he
"Wi
ndscreen
" position.
These markings on the control panel indicate the
control positions for rapid demistin
g or
defrostin
g of the windscreen and side windows.
:L
WKWKHPDQXD
OD
LU
con
di
tion
ing system
)
Put the temperature and air flow controls to the dedicated marked position.
)
P
ut th
e air int
ake control to the "Ext
erior air
intake" position

(manual control to the ri
ght or electric
control with indicator lamp o
ff).
) Put t
he a
ir distribution contro
l to t
he
"Wi
ndscreen
" position.
) Switch on the air conditioning by pressingthe
"A /C "
button; the associated green
warning lamp comes on.

Front demist - defrost :LWKWKHKHDWLQ
J
YHQWLODWLRQ
system )
Put the temperature and air flow controls to the dedicated marked position.
)
Put th
e air int
ake control to the "Ext
erior air
intake" position (manual control to the right or electriccontrol with indicator lamp o
ff).
)
Put t
he a
ir distribution contro
l to t
he
"Wi
ndscreen
" position.
These markings on the control panel indicate the
control positions for rapid demistin
g or
defrostin
g of the windscreen and side windows.
:L
WKWKHPDQXD
OD
LU
con
di
tion
ing system
)
Put the temperature and air flow controls to the dedicated marked position.
)
P
ut th
e air int
ake control to the "Ext
erior air
intake" position

(manual control to the ri
ght or electric
control with indicator lamp o
ff).
) Put t
he a
ir distribution contro
l to t
he
"Wi
ndscreen
" position.
) Switch on the air conditioning by pressingthe
"A /C "
button; the associated green
warning lamp comes on.

Doors From outside )
After unlockin
g the vehicle usin
g the
remote contro
l or t
he key, pu
ll the door
handle.

From inside ) Pull the door
lever to o
pen t
he door; t
his
unlocks this ve
hicle comp
lete
ly.
Closin
g
When a door is not closed correctl
y:
-
when t
he en
gine is runn
ing
, this
warning lamp comes on, accompan
ied
by a message on the multi
function
screen for a few seconds,
-
when the vehicle is moving (speed
higher than 6 mph (10 km/h)), this warning
lamp comes on, accompanied by an audible si
gnal and a messa
ge on the
mu
ltifunction screen for a few seco
nds.