trip computer Citroen DS3 2011 1.G Owner's Manual

Instruments and controls



1.
Steering lock and ignition.

2.
Audio equipment steering wheel controls.

3.
Wiper/screenwash/trip computer stalk.

4.
Scented air freshener.

5.
Central locking button.

6.
Multifunction screen.

7.
Hazard warning lamp switch.

8.
Central adjustable air vents.

9.
Sunshine sensor
Hi-Fi audio system central speaker.

10.
Passenger's airbag.

11.
Side adjustable air vent.

12 .
Glove box /Passenger's airbag deactivation.

13.
Parking brake.

14 .
Central armrest with storage.

15.
Upper and lower storage.

16.
MyWay or Audio system.

17.
Heating/air conditioning controls.

001
Instruments and controls


To help you understand the information presented in the instrument
panel, this section describes the three back-lit dials, the location and
purpose of each warning and indicator lamp, and explains the information
provided by your trip computer.

Tr i p c o m p u t e r







Monochrome screen A


Information displays



)
Press the button, located at the end of the
wiper stalk
, to display the various items of
trip computer information in succession. The trip computer provides the following
information:


- range,

- current fuel consumption,

- Stop & Star t time counter,

- distance travelled,

- average fuel consumption,
- average speed.

)
The next press then returns you to
the normal display.

System that gives you current information on your journey (range, fuel consumption…).


Zero reset



)
Press the control for more than
two seconds to reset to zero the distance
travelled, the average fuel consumption
and the average speed.

47Monitoring





Monochrome screen C


Information displays



)
Press the button, located at the end of
the wiper stalk
, to display the various trip
computer tabs in succession.

- the current information tab
with:


●
the range,

●
the current fuel
consumption,

●
the distance remaining to
be travelled or the Stop &
Star t time counter.



- the trip "1"
tab with:


●
the distance travelled,

●
the average fuel
consumption,

●
the average speed,
for the first trip.



- the trip "2"
tab with:


●
the distance travelled,

●
the average fuel
consumption,

●
the average speed,
for the second trip.


)
Pressing the button again returns you to
the normal display.


16/9 colour screen (MyWay)


Trip zero reset



)
When the trip required is displayed, press
the button on the end of the wiper stalk for
more than two seconds.
Trips "1"
and "2"
are independent but their use
is identical.
For example, trip "1"
can be used for daily
figures, and trip "2"
for monthly figures.

A few definitions…


Range

(miles or km)
This indicates the distance
which can still be travelled with the fuel
remaining in the tank in relation to the average
fuel consumption over the last few miles
(kilometres) travelled.

Current fuel consumption

(mpg or l/100 km or km/l)

This is the average fuel consumption
during the last few seconds.

Average fuel
consumption
(mpg or l/100 km or km/l)
This is the average fuel consumption since the
last trip computer zero reset.


Average speed

(mph or km/h)
This is the average speed calculated
since the last trip computer zero reset
(ignition on).


Distance travelled

(miles or km)
This indicates the distance
travelled since the last trip computer zero reset.









Stop & Start time
counter
(minutes /sec onds or hour s /minutes)
If your vehicle is fitted with Stop & Start, a time
counter calculates the time spent in STOP
mode during a journey.
It resets to zero every time the ignition is
switched on with the key.
This value may vary following a change
in the style of driving or the relief,
resulting in a significant change in the
current fuel consumption.
If dashes are displayed continuously
while driving in place of the digits,
contact a CITROËN dealer or a
qualified workshop. This function is only displayed from
20 mph (30 km/h).
When the range falls below 20 miles (30 km),
dashes are displayed. After filling with at least
5 litres of fuel, the range is recalculated and is
displayed when it exceeds 60 miles (100 km).


Distance remaining to
destination
(miles or km)
This is the distance remaining to be travelled
to the final destination. It can be entered by
the user.
If the distance is not entered, dashes are
displayed in place of the digits.

Monochrome screen A

This displays the following information:


- time,

- date,

- ambient temperature (this flashes if there is
a risk of ice),

- status of the doors and boot,

- audio sources (radio, CD...),

- trip computer (refer to the "Instruments and
Controls" section).
Warning messages (e.g.: "Emission control
system faulty") or information messages
(e.g.: "Boot open") may appear temporarily.
These can be cleared by pressing the "ESC"

button.


Displays on the screen

From the control panel of your Audio system,
you can:


)
press the "MENU"
button to gain access to
the main

menu
,

)
press the " 
" or " 
" buttons to scroll
through the items on the screen,

)
press the "MODE"
button to change
the permanent application (date, audio
source...),

)
press the " 
" or " 
" buttons to change a
setting value,

)
press the "OK"
button to confirm,
or

)
press the "ESC"
button to abandon the
operation in progress.



Controls



)
Press the "MENU"
button to gain access
to the main

menu
, then press the " 
" or
" 
" buttons to scroll through the various
menus:


- radio-CD,

- vehicle configuration,

- options,

- display settings,

- languages,

- units.

)
Press the "OK"
button to select the menu
required.


Main menu

55Multifunction screens











Monochrome screen C

This displays the following information:


- time,

- date,

- ambient temperature (this flashes if there is
a risk of ice),

- status of doors and boot,

- audio sources (radio, CD, USB por t, jack
socket etc.),

- trip computer (refer to the "Instruments and
controls" section).
Warning messages (E.g. "Emisions control
system faulty") or information messages
(E.g.: Automatic headlamps active") may
appear temporarily. These can be cleared by
pressing the "ESC"
button.


Displays on the screen

From your Audio system control panel, you can:


)
press the "MENU"
button to gain access to
the main

menu
,

)
press the " 
" or " 
" buttons to scroll
through the items on the screen,

)
press the "MODE"
button to change the
permanent application (trip computer, audio
source...),

)
press the " 
" or " 
" buttons to change a
setting value,

)
press the "OK"
button to confirm,
or


)
press the "ESC"
button to abandon the
operation in progress.



Controls



)
Press the "MENU"
button to gain access to
the main

menu
:


- audio functions,

- the trip computer,

- personalisation-configuration,

- telephone (hands-free kit).

)
Press the " 
" or " 
" buttons to select the
menu required, then confirm by pressing
the "OK"
button.



Main menu

With the Audio system switched on, once this
menu has been selected you can activate
or deactivate the functions linked with use
of the radio (RDS, REG, RadioText), the CD
(introscan, shuffle, CD repeat) or the MP3
player (USB por t /jack socket).
For more information on the "Audio functions"
application , refer to the Audio system par t of
the "Audio and Telematics" section.


"Au d i o f u n c t i o n s"
menu
"Trip computer" menu

Once this menu has been selected, you can
consult information concerning the status of the
vehicle (warnings log, status of functions, etc.).

Alert log

This summarises the active warning messages,
displaying them in succession on the
multifunction screen.


Status of functions

This summarises the status (active or inactive)
of the vehicle's functions.


Enter distance to destination

This allows you to enter an approximate
distance until your final destination.


)
Press the "MENU"
button to gain access to
the general menu.

)
Press the arrows, then the "OK"
button to
select the "

Tr i p c o m p u t e r

"
menu.

)
In the "

Tr i p c o m p u t e r

"
menu, select one
of the following applications:

59Multifunction screens














16/9 colour screen (MyWay)

It displays the following information
automatically and directly:


- time,

- date,

- altitude,

- ambient temperature (the value displayed
flashes if there is a risk of ice),

- check of the doors,

- warning and vehicle function status
messages, displayed temporarily,

- audio functions,

- trip computer information (see the
"Monitoring" section),

- satellite navigation system information.



Displays on the screen

MyWay To select one of the applications, at the
control panel:


)
press the dedicated "RADIO"
, "MUSIC"
,
"NAV"
, "TRAFFIC"
, "SETUP"
or
"PHONE"
button for access to the
corresponding menu,

)
turn the dial to change the selection,

)
press the dial to confirm the selection,
or

)
press the "ESC"
button to abandon the
current operation and return to the previous
display.


Controls

For more information on these applications,
refer to the "Audio and Telematics" section or
to the specific user guide given to you with the
other owner's documents.

247

The MyWay is protected in such a way that it will only
operate in your vehicle. If it is to be installed in another
vehicle, contact a CITROËN dealer for confi guration of
the system.

Certain functions described in this handbook will
become available during the year.


MYWAY


For safety reasons, the driver must carry out operations
which require prolonged attention while the vehicle is
stationary.
When the engine is switched off and to prevent
discharging of the battery, the MyWay switches off
following the activation of the Energy Economy mode.


MULTIMEDIA AUDIO SYSTEM/BLUETOOTH TELEPHONE
SATELLITE NAVIGATION SYSTEM FOR EUROPE BY SD CARD


01 First steps
CONTENTS

02 Steering mounted controls

03 General operation

04 Navigation - Guidance

05 Traffic information

06 Radio

07 Music media players

08 Bluetooth telephone

09 Configuration

10 Trip computer p.
p.
p.
p.
p.
p.
p.
p.
p.
p.

11 Screen menu map

Frequently asked questions p.
p. 248
249
250
253
261
263
264
267
270
271
272
276