LAMP Citroen DS3 2014 1.G Owner's Guide

33
DS3_en_Chap01_controle-de-marche_ed01-2014
Warning lampis oncau seAction / Observations
AdBlue
® additive
(BlueH
d i d iesel) fixed,
  on   switching o
n   the   ignition, a

ccompanied   by   an
 a

udible   signal   and   a
 m

essage   indicating   the
 r

emaining
 d
riving
 r
ange.The
  remaining   driving   range   is  b
etween   350   miles   (600   km)   and  
1

500   miles   (2400   km).Have the
adbl ue® additive tank topped up as soon a
s
 
possible:
 
go
 
to
  a   dealer   CITROËN   or   a   qualified  
w

orkshop,
 
or
 
carry   out   this   operation   yourself   by  
r

eferring
 
to
 
the
 
corresponding   section.
+ flashing
 
associated
 
with
 t

he
 
SERVICE
 
warning
 l

amp,
 
accompanied
 
by
 a

n
 
audible
 
signal
 
and
 
a
 m

essage
 
indicating
 
the
 r

emaining
 d

riving
 r

ange. The
 
remaining
 
driving
 
range
 
is
 
b

etween
 
0
 
and
 
375
 
miles
 
(600
 
km). You
 
must
 
top-up the a d
blu
e
® additive tank to avoid
a
breakdown :
 
go
 
to
 
a
 
dealer
 
CITROËN   or   a   qualified  
w

orkshop,
 
or
 
carry
 
out
 
this
 
operation   yourself   by  
r

eferring
 
to
 
the
 
corresponding
  section.
flashing,
 as

sociated
 w

ith the SERVICE
warning
 lam

p,
 a

ccompanied
 
by
 
an
 a

udible
 
signal
 
and
 
a
 m

essage
 
indicating
 
that
 s

tarting
 
is
 
prevented. The
a
d
blu

e
® tank is empty: the s
tarting
 
inhibition   system   required  
b

y
 
legislation   prevents   starting   of   the  
e

ngine. To
  be   able   to   start   the   engine,   you   must   top-up the a
dblu e® additive tank: go to a dealer CITROËN or a q
ualified   workshop,   or   carry   out   this   operation   yourself  
b

y
 
referring   to   the   corresponding   section.
It is essential
 

to   add   at   least   3.8   litres   of   AdBlue
® to
the
 
tank.
Monitoring

DS3_en_Chap01_controle-de-marche_ed01-2014
Warning lampis oncau seAction / Observations
+
+ S
cR e

missions
control system
(BlueH
d i d iesel)fixed,
  on   switching   on   the
 i

gnition,   associated   with
 t

he   SERVICE   and   engine
 d

iagnostic
 w
arning
 lam
ps,
 a

ccompanied   by   an   audible
 s

ignal   and   a   message   indicating
 a

n   emissions   control   fault.A
  fault   with   the   SCR   emissions  
c

ontrol   system   has   been   detected.This
  alert   disappears   once   the   exhaust  
e

missions   return   to   normal   levels.
flashing,
  on   switching   on  
t

he   ignition,   associated   with  
t

he   SERVICE   and   engine  
d

iagnostic   warning   lamps,  
a

ccompanied   by   an   audible  
s

ignal   and   a   message  
i

ndicating
 t
he
 r
emaining
 d

riving
 r
ange.The
  remaining   driving   range   is  
b

etween   0   and   650   miles   (1   100   km).Contact a CITR
oË

N dealer or a qualified
workshop
  without delay, to avoid a
breakdown .
flashing,
  on   switching   on  
t

he   ignition,   associated   with  
t

he   SERVICE   and   engine  
d

iagnostic   warning   lamps,  
a

ccompanied   by   an   audible  
s

ignal   and   a   message  
i

ndicating   that   starting   is  
p

revented. You
  have   exceeded   the   authorised  
d

riving   limit:   the   starting   inhibition  
s

ystem   prevents   starting   of   the  
e

ngine.To
  be   able   to   start   the   engine,   you   must
call on a CITR
oË

N dealer or a qualified
workshop.

35
DS3_en_Chap01_controle-de-marche_ed01-2014
With the engine running, when the needle is:
- i n zone A ,
  the   temperature   is   correct,
-

i
n zone B,   the   temperature   is   too   high;  
t

he central STOP
 
warning   lamp   and   the  
m

aximum   temperature   warning   lamp 1
come
  on   in   red,   accompanied   by   an  
a

udible   signal   and   a   message   in   the  
m

ultifunction
 s
creen.
You must stop as soon as it is safe to do so.
Wait
  a   few   minutes   before   switching   off   the  
e

ngine.
Contact a CITR
oË

N dealer or a qualified
workshop.
coolant temperature indicator
After driving for a few minutes, the temperature a nd   pressure   in   the   cooling   system   increase.
To
  top   up   the   level:
F
 
w
ait   for   the   engine   to   cool   down,
F

u
nscrew the cap by two turns to allow the
pressure to drop,
F
 
w
hen   the   pressure   has   dropped,   remove  
t

he cap,
F
 
t
op   up   the   level   to   the   "MA X"   mark.
Monitoring

37
DS3_en_Chap01_controle-de-marche_ed01-2014
Less than 600 miles (1 000 km)
remain before the next service is due
Example: 560   miles   (900   km)   remain   before  t
he   next   service   is   due.
For
  5   seconds   after   the   ignition   is   switched   on,  
t

he   screen   indicates:
5
  seconds   after   the   ignition   is   switched   on,  
t

he   distance   recorder   resumes   its   normal  
ope

ration.
 T
he spanner remains on to
indicate
  that   a   service   must   be   carried   out  
s

oon. 5
  seconds   after   the   ignition   is   switched   on,  
t

he   distance   recorder   resumes   its   normal  
ope

ration.
 T
he spanner remains on.
Service overdue
For 5 seconds after the ignition is switched on, t
he spanner flashes to indicate that the service
must
  be   carried   out   as   soon   as   possible.
Example:
 

the   service   is   overdue   by   180   miles  
(

300   km).
For
  5   seconds   after   the   ignition   is   switched   on,  
t

he   screen   indicates: For
bl ueHDi Diesel versions, this alert
may   also   be   accompanied   by   the   fixed  
i

llumination   of   the   service   warning   lamp  
w

hen   the   ignition   is   on.
The
  distance   remaining   may   be  
w

eighted   by   the   time   factor,   depending  
o

n   the   driving   conditions.
Therefore,
  the   spanner   may   also   come  
o

n   if   you   have   exceeded   the   period  
s

ince the last service, indicated in the
maintenance
 an

d
 w
arranty
 g
uide.
For
b
l
ueHDi Diesel versions, the
spanner
  may   also   be   brought   on   earlier  
t

han   expected,   depending   on   the  
d

egree   of   deterioration   of   the   engine   oil  
(

depending   on   the   country   of   sale).
The
  rate   of   deterioration   of   the   engine  
o

il   depends   on   the   driving   conditions   in  
w

hich   the   vehicle   is   used.
Monitoring

39
DS3_en_Chap01_controle-de-marche_ed01-2014
on vehicles fitted with an electric oil level
indicator,  information   on   the   oil   level   is  
d

isplayed   in   the   instrument   panel   for   a   few  
s

econds   when   the   ignition   is   switched   on,   after  
t

he   service   information.
Engine oil level indicator*
The level shown will only be correct
if  the   vehicle   is   on   level   ground   and  
t

he   engine   has   been   off   for   more   than  
3

0 minutes.
Oil level correct
Oil level low
This is indicated by the flashing of " O I L" ,
a ccompanied   by   illumination   of   the   service  
w

arning   lamp,   an   audible   signal   and   a  
m

essage.
If
  the   low   oil   level   is   confirmed   by   a   check   using  
t

he   dipstick,   the   level   must   be   topped   up   to  
p

revent   damage   to   the   engine.
Refer
  to   the   "Checking   levels"   section.
Oil level indicator fault
This is signaled by the flashing of "OIL- -".
C ontact a CITRoË N dealer or a qualified
workshop.
In the event of a fault with the electric oil level
indicator,
  the   engine   oil   level   is   no   longer  
mon

itored.
While
  the   system   is   faulty,   you   should   check  
t

he   engine   oil   level   using   the   manual   dipstick  
l

ocated   under   the   bonnet.
Refer
  to   the   "Checking   levels"   section.
*
  Depending   on   version.
Monitoring

41
DS3_en_Chap01_controle-de-marche_ed01-2014
Black panel
System allowing certain displays to be switched off   for   night   driving.
The
  instrument   panel   remains   illuminated   with  
o

nly the vehicle speed and cruise control or
speed
  limiter   information,   if   in   use.
If
  there   is   an   alert   or   a   change   in   a   function  
o

r   to   a   setting,   the   black   panel   mode   is  
i

nterrupted.Activation
F With   the   lighting   on,   press   the   left   hand  b
utton   of   the   instrument   panel   several  
t

imes   to   progressively   reduce   the  
d

ashboard   lighting   level.
F
 
P
ress   the   button   again   to   reduce   the  
l

ighting   to   the   minimum   level   and   switch   off  
t

he   interior   mood   lighting.
F
 
P
ress   the   button   again   to   activate   the   black  
pan

el.
System
 
for
 
manual
 
adjustment
 
of
 
the
 b
rightness
 
of
 
the
 
instruments
 
and
 
controls
 
in
 r
elation
 
to
 
the
 
exterior
 
brightness.
Lighting dimmer
Activation
When the lighting is on:
F  p ress   the   button   to   change   the   brightness  
o

f   the   instruments   and   controls,
F
 
w
hen   the   level   of   brightness   required   is  
r

eached,   release   the   button.
deactivation
When the lighting is off, or in day mode on vehicles   fitted   with   daytime   running   lamps,  
p

ressing   the   button   does   not   have   any   effect.
Monitoring

53
DS3_en_Chap02_ecrans-multifonction_ed01-2014
"Personalisation-
con
figuration"
menu
Once this menu has been selected, you can g
ain   access   to   the   following   functions:
-
 
d
efine   the   vehicle   parameters,
-
 
d
isplay   configuration,
-
 
c
hoice   of   language.
Define the vehicle parameters
Once this menu has been selected, you can activate   or   deactivate   the   following   equipment:
-
 
w
iper   linked   to   reverse   gear   (refer   to   the  
"

Visibility" section),
-
 
g
uide-me-home   lighting   and   duration   (refer  
t

o the " Visibility" section), Example:
  setting   of   the   duration   of   the  
guide-me-home l ighting
F P ress the "5" or " 6" buttons, then the
"OK"
 

button   to   select   the   menu   required.F

P
ress the "
5" or " 6" buttons, then the
"OK"
 
button   to   select   the   "Guide-me-home  
h

eadlamps"
 l
ine.
F
P
ress the "
7" or " 8" buttons to set the
value required (15, 30 or 60 seconds), then
press the "OK"
 
button   to   confirm.
F
P
ress the "5" or " 6" buttons, then the
"OK" button to select the "OK"
 

box   and  
c

onfirm   or   press   the   "Back" button to
cancel.
This menu is also used to reinitialise the tyre u nder-inflation   detection   system   (refer   to   the  
"

Safety"
 s
ection).
-
 
p
arking   sensors   (refer   to   the   "Driving"  
s

ection).
-  
a
utomatic   emergency   braking   (refer   to  
t

he "Safety" section, under "
ac
tive City
Brake").
Multifunction screens

DS3_en_Chap03_ouvertures_ed01-2014
This is indicated by lighting of the courtesy lamps   and   flashing   of   the   direction   indicators  
f

or   a   few   seconds.
Locating your vehicle
F Press   the   closed   padlock   to  l
ocate   your   locked   vehicle   in   a  
c

ar
 par
k.
Anti-theft protection
Electronic engine immobiliser
The key contains an electronic chip which has a  special   code.   When   the   ignition   is   switched  
o

n,   this   code   must   be   recognised   in   order   for  
s

tarting   to   be   possible.
This
  electronic   engine   immobiliser   locks   the  
e

ngine   management   system   a   few   minutes  
a

fter   the   ignition   is   switched   off   and   prevents  
s

tarting   of   the   engine   by   anyone   who   does   not  
h

ave   the   key.In the event of a fault, you are
informed
  by   illumination   of   this  
w

arning   lamp,   an   audible   signal   and   a   message  
i

n   the   screen.
In
  this   case,   your   vehicle   will   not   start;   contact  
a

  CITROËN   dealer   as   soon   as   possible.-
 
P
osition   1:   Stop
-
 
P
osition   2:   Ignition
-
 
P
osition   3:   Starting
Ignition switch
keep safely the label attached to
the keys  given   to   you   on   acquisition   of  
t

he   vehicle.

69
DS3_en_Chap03_ouvertures_ed01-2014
System which provides full manual locking or unlocking   of   the   doors   from   the   inside.
Manual central locking
control
Locking
F Press button A  to   lock   the   vehicle.
The   red   indicator   lamp   on   the   button   comes   on.
Unlocking
F Press button A  again   to   unlock   the   vehicle.
The   red   indicator   lamp   on   the   button   switches   off.
If one of the doors is open, central
locking
 
from
 
the
 
inside
 
does
 
not
 
take
 
p

lace. If
  the   vehicle   is   locked   from   the   outside,  
t

he   red   indicator   lamp   flashes   and  
b

utton A   is   inactive.
F
 
I
n   this   case,   use   the   remote   control  
o

r   the   key   to   unlock   the   vehicle.
Automatic central
locking
System which provides full automatic locking or   unlocking   of   the   doors   and   the   boot   while  
d

riving.
You
  can   activate   or   deactivate   this   function.
Locking
When the speed exceeds 6 mph (10 km/h), the doors   and   the   boot   lock   automatically.
Unlocking
F Above  6   mph   (10   km/h),   press   button   A to
unlock   the   doors   and   the   boot   temporarily.
If one of the doors is open, the
automatic
  central   locking   does   not   take  
p

lace.
If   the   boot   is   open,   the   automatic  
c

entral   locking   of   the   doors   is   active.
Driving
 
with
 
the
 
doors
 
locked
 
can
 
make
 
a

ccess
 
more
 
difficult
 
for
 
the
 
emergency
 
s

ervices
 
in
 
the
 
event
 
an
 
emergency.
Access

71
DS3_en_Chap03_ouvertures_ed01-2014
boot
Opening
F After  unlocking   the   vehicle   using   the  r
emote   control   or   the   key,   press   the  
o

pening   control   and   raise   the   tailgate.
closing
F Lower  the   tailgate   using   the   interior   grab  han
dle.
If
  the   tailgate   is   not   closed   correctly:
-

when the engine is running , this
warning   lamp   comes   on,   accompanied b

y   a   message   on   the   multifunction
 s

creen for a few seconds,
- when the vehicle is moving (speed above 6   mph   (10   km/h)),   this   warning   lamp   comes  
o

n,   accompanied   by   an   audible   signal   and  
a

  message   on   the   multifunction   screen   for  
a

  few   seconds. System
  for   mechanical   unlocking   of   the   boot  
i

n   the   event   of   a   battery   or   central   locking  
m

alfunction.
Tailgate release
Unlocking
F Fold  back   the   rear   benchseat   to   gain  a
ccess   to   the   lock   from   inside   the   boot.
F
 
I
nsert   a   small   screwdriver   into   hole   A of the
lock
  to   unlock   the   tailgate.
Access