display Citroen DS3 2015 1.G Manual PDF

1
19
DS3_en_Chap11c_SMEGplus_ed01-2015
Pairing a Bluetooth®
telephone
For reasons of safety and because they
require
  prolonged   attention   on   the   part  
o

f   the   driver,   the   operations   for   pairing  
t

he   Bluetooth   mobile   telephone   to   the  
h

ands-free   system   of   the   audio   system  
m

ust   be   carried   out   with   the   vehicle
stationary .
Procedure (short) from the
telephone
In the Bluetooth menu of your device, select the s
ystem   name   in   the   list   of   devices   detected.
Enter
  a   code   of   at   least   4   figures   in   the   device  
a

nd   confirm. Enter
  this   same   code   in   the   system,  
s

elect "OK"
  and   confirm.
Procedure from the system
Activate the telephone's Bluetooth function and   ensure   that   it   is   "visible   to   all"   (telephone  
c

onfiguration). Press on Telephone to display the
primary
 pag

e.
Press
  on   the   secondary   page.
Select " Bluetooth connection ".
Select Search .
The list of telephones detected is
displayed.
If the telephone is not detected, it is
recommended   that   you   switch   the   Bluetooth f

unction   on   your   telephone   off   and   then   on   again.
Select the name of the desired   peripheral   from   the  
l

ist and " Confirm ".
Enter
 
a
 
code   of   at   least   4   figures   for  
t

he connection then " Confirm".
Enter
 
this
 
same
 
code   in   the   telephone   then  
a

ccept
 
the
 
connection.
The
 
system
 
offers
 
to   connect   the   telephone:
-

i

n " Telephone "
 
(hands-free   kit,   telephone  
o

nly),
-

i

n " Audio streaming "
  (streaming:   wireless  
p

laying
 
of
 
audio
  files   from   the   telephone),
-

i

n " Internet "
 
(internet   browsing,   only   if   your  
t

elephone
 
is
 
compatible   with   the   "DUN"  
D

ial-Up
 
Networking   Bluetooth   standard).
Select
 
one
 
or
 
more
 
profiles   and   confirm.

1
19
321
DS3_en_Chap11c_SMEGplus_ed01-2015
The services available depend on
the  network,   the   SIM   card   and   the  
c

ompatibility   of   the   Bluetooth   telephone  
u

sed.   Check   the   telephone   manual   and  
w

ith   your   network   provider   for   details   of  
t

he   services   available   to   you.
The
  ability   of   the   system   to   connect  
w

ith only one profile depends on the
telephone.
  The   two   profiles   may   both  
c

onnect   by   default.
Visit
 
www.citroen.co.uk   for   more   information  
(

compatibility,   additional   help,   ...).
The
  recognised   telephone  
a

ppears   in   the   list.
Depending
  on   your   telephone,   you   may   be  
a

sked
  to   accept   automatic   connection   every  
t

ime
 
the   ignition   is   switched   on. On return to the vehicle, if the last telephone
connected
  is   present   again,   it   is   reconnected  
a

utomatically   and   within   around   30   seconds  
a

fter   switching   on   the   ignition   the   pairing   is  
d

one without any action on your part, with
(Bluetooth
 a

ctivated).
To
  modify   the   automatic   connection   mode,  
s

elect the telephone in the list then select the
desired
 p

rofile.
Depending
  on   the   type   of   telephone,  t
he   system   will   ask   you   to   accept   or   not  
t

he   transfer   of   your   contacts.
If not, select " Update".
Connecting a Bluetooth®
peripheral device
Automatic reconnection
On switching on the ignition, the telephone c
onnected   when   the   ignition   was   last   switched  
o

ff   is   automatically   reconnected,   if   this  
c

onnection   mode   had   been   activated   during   the  
pa

iring
 p
rocedure.
The
  connection   is   confirmed   by   the   display   of   a  
m

essage   and   the   name   of   the   telephone.
Manual connection
Press on Telephone to display the
primary pag e.
Press
  on   the   secondary   page.
Select " Bluetooth " to display the list
of
  paired   peripherals.
Select
 
the   peripheral   to   connect.
Press on " Search".
The
 
connection   is   confirmed   by   the   display   of   a  
m

essage
 
and   the   name   of   the   telephone.
Audio and Telematics

1
19
20
22
DS3_en_Chap11c_SMEGplus_ed01-2015
Managing paired
telephones
This function allows the connection or
disconnection of a peripheral device as
well  as   the   deletion   of   a   pairing. Using
  the   telephone   is   not  r
ecommended   while   driving.
Park
  the   vehicle.
Make
  the   call   using   the   steering  
m

ounted   controls.
Press on Telephone
to display the
primary
 pag

e.
Press
  on   the   secondary   page.
Select " Bluetooth " to display the list
of
  paired   peripheral   devices.
Select
  the   peripheral   in   the   list.
Select " Search for devices "
Or "Connect /
d
i
sconnect" to start or
end the Bluetooth connection with
the
  selected   device.
Or "
de

lete"
  to   delete   the   pairing.
Receiving a call
An incoming call is announced by a ring and a superimposed   display   in   the   screen.
Make
  a   short   press   on   the   steering  
m

ounted   TEL button to accept an
incoming
 c

all.
Make
  a   long   press
on
  the   steering   mounted   TEL button
to
  reject   the   call.
Or Select "End call".
Making a call
Calling a new number
Press on Telephone to display the
primary pag e.
Enter
  the   phone   number   using   the  
d

igital
 k
eypad.
Press " Call"
  to   start   the   call.
Calling a contact
Press on Telephone to display the
primary pag e.
Or
  make   a   long   press
on
  the   steering   mounted   TEL
 
button.

3
2
3
9
14
15
16
17
18
323
DS3_en_Chap11c_SMEGplus_ed01-2015
Select "Contacts ".
Select
 
the   desired   contact   from   the   list   offered.
Select " Call".
Calling a recently used number
Press on Telephone to display the
primary pag e.
Select " Call log ".
Select
 
the   desired   contact   from   the   list   offered.
It
 
is
  always   possible   to   make   a   call  
d

irectly   from   the   telephone;   park   the  
v

ehicle   first   as   a   safety   measure.
Managing contacts / entries
Press on Telephone to display the
primary pag e.
Select " Contacts ".
Select " Add contact ".
Select " Create"
 

to
 
add
 
a
 
new
 
contact.
Or "Modify "
  to   edit   the   selected   contact.
Or "
de

lete " to delete the selected
contact.
Or "
de

lete all "
  to   delete   all   information  
f

or   the   selected   contact. Select "di
rectory information
" for
the   number   of   entries   used,  
available,
 ...
Audio and Telematics

325
DS3_en_Chap11c_SMEGplus_ed01-2015
QUESTIOnAnSWERSOLUTIOn
C

ertain
  traffic   jams   along  
t

he route are not indicated
in
 
real
 
time. On
  starting,   it   is   several   minutes   before   the   system   begins   to  
r

eceive   the   traffic   information. Wait
  until   the   traffic   information   is   being   received  
c

orrectly   (display   of   the   traffic   information   icons  
o

n   the   map).
The
  filters   are   too   restrictive. Modify
  the   "Geographic   filter"   settings.
In
  certain   countries,   only   major   routes   (motor ways...)   are   listed   for  
t

he   traffic   information. This
  phenomenon   is   normal.   The   system   is  
d

ependent   on   the   traffic   information   available.
The altitude is not
displayed. On
  starting,   the   initialisation   of   the   GPS   may   take   up   to   3   minutes   to  
r

eceive   more   than   4   satellites   correctly.Wait
  until   the   system   has   completed   starting  
u

p,   so   that   there   is   GPS   coverage   of   at   least  
4

 satellites.
Depending
  on   the   geographical   environment   (tunnel...)   or   the  
w

eather,   the   conditions   of   reception   of   the   GPS   signal   may   vary.This
  phenomenon   is   normal.   The   system  
i

s   dependent   on   the   GPS   signal   reception  
c

onditions.
Audio and Telematics

DS3_en_Chap11c_SMEGplus_ed01-2015
Radio
QUESTIOnAnSWERSOLUTIOn
T

he
 
quality   of   reception   of  
t

he radio station listened
to
 
gradually   deteriorates  
o

r the stored stations do
not
 
function   (no   sound,  
87

.5 Mhz   is   displayed...). The
  vehicle   is   too   far   from   the   transmitter   used   by   the   station  
l

istened   to   or   there   is   no   transmitter   in   the   geographical   area  
t

hrough   which   the   vehicle   is   travelling.Activate
  the   "RDS"   function   by   means   of   the  
s

hort-cut   menu   to   enable   the   system   to   check  
w

hether   there   is   a   more   power ful   transmitter   in  
t

he   geographical   area.
The
  environment   (hills,   buildings,   tunnels,   basement   car   parks...)  
b

lock   reception,   including   in   RDS   mode.This
  phenomenon   is   normal   and   does   not  
i

ndicate   a   fault   with   the   audio   system.
The
  aerial   is   absent   or   has   been   damaged   (for   example   when   going  
t

hrough   a   car   wash   or   into   an   underground   car   park).Have
  the   aerial   checked   by   a   CITROËN   dealer.
I
 
cannot   find   some   radio  
s

tations in the list of
stations
 r

eceived. The
  station   is   not   received   or   its   name   has   changed   in   the   list.
Some
  radio   stations   send   other   information   in   place   of   their   name  
(

the   title   of   the   song   for   example).
The
  system   interprets   this   information   as   the   name   of   the   station.
The
 
name   of   the   radio  
s

tation
 c
hanges.

327
DS3_en_Chap11c_SMEGplus_ed01-2015
Media
QUESTIOnAnSWERSOLUTIOn
P

layback   of   my   USB  
m

emory   stick   starts   only  
a

fter
 
a
 
very   long   wait  
(

around   2   to   3   minutes). Some
  files   supplied   with   the   memory   stick   may   greatly   slow   down  
a

ccess   to   reading   the   memory   stick   (multiplication   by   10   of   the  
c

atalogue   time). Delete
  the   files   supplied   with   the   memory   stick  
a

nd   limit   the   number   of   sub-folders   in   the   file  
s

tructure   on   the   memory   stick.
When
 
I

 
c
onnect  
m
y  
i
Phone  
a

s telephone and to the
USB
 
port   at   the   same  
t

ime,
 
I
 
am   unable   to   play  
t

he
 
music   files. When
  the   iPhone   connects   automatically   as   a   telephone,   it   forces  
t

he   streaming   function.   The   streaming   function   takes   the   place  
o

f the USB function which is then not useable, there is a period
without
  sound   of   the   track   being   played   with   Apple
® players.D isconnect   and   reconnect   to   the   USB   port   (the  
U

SB   function   takes   priority   over   streaming).
Some
 
characters
 
in
 
the
 
m

edia
 
information
 
are
 
not
 
d

isplayed correctly while
playing. The
 
audio
 
system
 
does
 
not
 
display
 
some
 
types
 
of
 
characters. Use   standard   characters   to   name   tracks   and  
f

olders.
Playing
 
of
 
streaming
 
files
 
d

oes
 
not
 
start. The
 
peripheral
 
device
 
connected
 
does
 
not
 
support
 
automatic   play. Start   the   playback   from   the   device.
The
 
names
 
of
 
tracks
 
and
 
t

he
 
track
 
length
 
are
 
not
 
d

isplayed on the screen
when
 s

treaming
 a

udio. The
 
Bluetooth
 
profile
 
does
 
not
 
allow
 
the
 
transfer
 
of
 
this   information.
Audio and Telematics

DS3_en_Chap11c_SMEGplus_ed01-2015
QUESTIOnAnSWERSOLUTIOn
I

 
cannot   connect   my  
B

luetooth
 t
elephone. The
  telephone's   Bluetooth   function   may   be   switched   off   or   the  
t

elephone   may   not   be   visible. -
 
C
heck   that   your   telephone's   Bluetooth  
f

unction   is   switched   on.
-
 
C
heck   in   the   telephone   settings   that   it   is  
"

visible   to   all".
The
  Bluetooth   telephone   is   not   compatible   with   the   system.You
  can   check   the   compatibility   of   your  
t

elephone   at   www.citroen.co.uk   (services).
The
 
volume   of   the  
t

elephone connected
in
 
Bluetooth   mode   is  
ina

udible. The
  volume   depends   both   on   the   system   and   on   the   telephone. Increase   the   volume   of   the   audio   system,   to  
m

aximum   if   required,   and   increase   the   volume   of  
t

he   telephone   if   necessary.
The
  ambient   noise   level   has   an   influence   on   the   quality   of  
t

elephone
 c
ommunication. Reduce
  the   ambient   noise   level   (close   the  
w

indows, reduce the booster fan speed, slow
down,
 ...

).
Some
 
contacts   are  
d

uplicated   in   the   list. The
  options   for   synchronizing   contacts   are   synchronizing   the  
c

ontacts   on   the   SIM   card,   the   contacts   on   the   telephone,   or   both.  
W

hen   both   synchronizations   are   selected,   some   contacts   may   be  
dup

licated. Select "Display SIM card contacts" or "Display
telephone
 c

ontacts".
Contacts are not shown in
alphabetical
 o

rder. Some
  telephones   offer   display   options.   Depending   on   the   settings  
c

hosen,   contacts   can   be   transferred   in   a   specific   order.Modify
  the   display   setting   in   the   telephone  
d

i r e c to r y.
The
 
system   does   not
 r

eceive
 

SMS
 
text
 
messages. The
  Bluetooth   mode   does   not   permit   sending   SMS   text   messages  
t

o   the   system.
Telephone

DS3_en_Chap11d_RD45_ed01-2015
First steps
* Available according to version.
O n   /   Off,   volume   setting.
Select
 s
ource:
Radio;   USB;   AUX;   CD;   Streaming.
Display   the   list   of   local   stations.
Long  
p
ress:  
C
D  
t
racks  
o
r  
M
P3  
f
olders  
(

CD   /   USB). Select   the   screen   display   mode:
Date,   audio   functions,   trip   computer,  
t

elephone.
Audio
 se
ttings:.
Front /rear   fader,   left /right   balance,  
b

ass/treble,   loudness,   audio  
am

biences.
The   DARK   button   changes   the  
s

creen   display   for   improved   driving  
c

omfort   at   night.
1
st press: upper bar only illuminated.
2nd press: black screen.
3rd press: return to standard display. S elect   next   frequency   down/up.
Select   previous/next   MP3   folder.
Select   previous/next   folder   /   genre   /  
a

rtist   /   playlist   (USB).
Abandon   the   current   operation. Confirm. Buttons 1 to 6
Select   a   pre-set   radio   station.
Long   press:   pre-set   a   station.
Automatic   frequency   search   down/up.
Select   previous/next   CD,   MP3   or  
U

SB   track.
Eject   CD.
Display
  main   menu. TA
  (Traffic   Announcements)   on/off.
Long   press:   PT Y*   (radio   Programme  
T

Yp e).
Selection
  of   AM   /   FM   wavebands.

DS3_en_Chap11d_RD45_ed01-2015
Menus
Screen C
Audio functions
Radio;  CD;   USB;   AUX.
Trip computer
Enter
  distances;   Alerts:   Status   of  
f

unctions.
Bluetooth
®: Telephone - Audio
Pairing;
 
Hands-free   kit;   Streaming.
Personalisation-configuration
Vehicle
 
parameters;   Display;  
L

anguages. For
 
a
n  
ov
erview  
o
f  
t
he  
m
enus  
a
vailable,  
r

efer   to   the   "Screen   menu   map"  
s

ection.
Screen A
Radio
Selecting a station
Press the SOURCE
button several
times   in   succession   and   select   the  
r

adio.
Press the BA
n

d AST button to
select
  a   waveband.
Briefly press one of the buttons to
carry
  out   an   automatic   search   of   the  
r

adio
 s
tations.
Press one of the buttons to carry out
a
  manual   search   up   /   down   for   radio  
f

requencies.
Press the LIST REFRESH button to
display the list of stations received
locally
  (30   stations   maximum).
To
  update   this   list,   press   for   more  
t

han   two   seconds.