buttons CITROEN DS3 2019 Owners Manual

Monochrome screen A This displays the following information: - time
,
- date, - ambient temperature (this flashes if there is
a risk o
f ice
),
- status o
f the doors and boot,
- audio sources (radio, CD...), - trip computer (refer to the "Instruments and
Controls" section).
Warnin
g messa
ges
(e.g.: "Emission control
system fault
y") or information messa
ges
(e.g.:
"Boot open"
) ma
y appear temporaril
y. These
can
be c
leare
d by press
ing the "E
SC
" button.
Displays on the screen

From the control panel of
your Audio s
ystem,
you can: ) press t
he "MENU"
button to
gain access to
the general menu
,
) press t
he " " or
" " buttons to scro
ll
through the items on the screen,
) press t
he "M
ODE"
button to c
hange
the permanent application
(date, audio
source...
),
)
press t
he "  " or "  " buttons to c
hange a
setting value,
) press t
he "OK" button to con
firm,
or ) press t
he "E
SC
"button to a
bandon t
he
operation in progress.
Co
ntrols
)
Press t
he "MENU"
button to ga
in access
to the general menu , then press the
" "
or "

" buttons to scroll through the various
me
nus:
- radio-CD
,
- vehicle configuration,
- o
ptions,
-
display sett
ings,
-
languages,
- un
its.
)
Press the
"OK
"button to select the menu
required.
Ge
neral m
enu

Languages Once the "Lan
guages" menu has been
selected, you can change the language used
by the display (Français, Italiano, Nederlands,
Portugues, Portugues-Brasil, Deutsch, English, Espanol
).
Units
Once the "Units" menu has been selected,
you can change the units o
f the
following
parameters:
- temperature (°C or °F),
- fuel consumption (l/100 km, mpg or km/l).
Once the fuel consumption units have been set to mp
g, the information in the
instrument
pane
l screen on s
peed an
d
distance w
ill also
be in m
ph an
d miles.

For sa
fety reasons, con
figuration by the
driver of the multifunction screen mustonly be done when stationary.
Display settings Once the "Display settings" menu has been selected, you can gain access to the following settings:
- year,- month
,
- day, - hour
,
- minutes,- 12
or 24 h
our m
ode
.
)
Once you have selected a setting, press the "  " or " 
" buttons to change its value.
)
Press the "
 " or " " buttons to switch
respect
ively to t
he prev
ious or next sett
ing.
)
Press the
"OK" button to save t
he c
hange
and return to the normal display or press
the
"ESC" button to cancel.

49
Multifuntion screens

Monochrome screen C
This displa
ys the followin
g information:
- t
ime,
- date
,
- ambient temperature (this flashes if there is
a risk o
f ice
),
- status of doors and boot, - audio sources (radio, CD, USB port, jack
socket etc.),
- trip computer (refer to the "Instruments and
controls" section
).

Warning messages (E.g. "Emisions control
system faulty") or information messages (E.g.: Automatic headlamps active") may appear
temporar
ily. These can
be c
leare
d by press
ing
the "ESC"
button.

Displa
ys on the screen
From
your Audio s
ystem control panel,
you can:
)
press the
"MENU"
button to
gain access to
the
genera
l menu
,
) press t
he "  " or "
" buttons to scro
ll
throu
gh the items on t
he screen,
)
press t
he "MODE"
button to c
hange t
he
permanent application (trip computer, audio
source...),
) press the
"  " or "  " buttons to change a
setting value,
)
press the
"OK"button to confirm
,
or ) press t
he "ESC
"button to a
bandon t
he
operat
ion
in pro
gress.
Controls
) Press t
he "MENU"
button to ga
in access to
t
he genera
l menu :
- audio functions
,
- the trip computer,
- personalisation-configuration,
- telephone
(hands-free kit
).
) Press
the "  " or "  " buttons to selec
t the
menu required, then con
firm b
y pressin
g
t
he "OK" button.
Ge
neral m
enu

51
Multifuntion screens
"P
erso
nalisat
ion-
Configuration" menu

Once this menu has been selected, you can gain access to the following functions: - define the vehicle parameters, - display configuration, - choice of language. 
'H
¿QHWKHYHKLFOHSDUDPHWHUV

Once this menu has been selected, you can activate or deactivate the following equipment: - wiper linked to reverse gear (refer to the
"Visibilit
y" section
),
- "guide-me-home" lighting - parking assistance
(refer to the "Driving"
section).
Example: setting of the duration of the "guide-
me-home" lighting ) Press the "
"
or "" buttons
, then the
"
OK" button to select the menu required.
)
Press the "
" or "" buttons, t
hen t
he
"
OK"
button to select the "
Guide-me-home
headlamps" line.
)
Press the "
" or
" " buttons to set t
he
value required
(15, 30 or 60 seconds
), then
press the
"OK"button to con
firm.
) Press t
he "  " or
"  " buttons, t
hen t
he
"OK"button to se
lect t
he "OK"
box an
d
confirm or press the
"ESC" button to
cancel.

Digital air conditioning The air conditioning can only operate when the engine is running. Automatic operation1. Automatic "comfort"
programme
Press t
he "A
UTO"button.
The
"AU TO "
symbol is displayed.
We recommend that you use this mode. It provides optimised
automatic control of all of the followin
g
functions: passen
ger compartment
tem
perature, air
flow, air distribution and air
intake, in accordance with the comfort value that you
have c
hosen.
This system is designed to operate e
ffectively
in all seasons
, with the windows closed.
For
your comfort, when the en
gine is
switched o
ff, the settin
gs are retained
until the en
gine
is sw
itched on a
gain.
To prevent too
great a distribution o
f
cold air w
hen t
he en
gine
is co
ld, the a
ir
flow will only reach its optimum level gradually.

2. Temperature adjustment The va
lue
indicate
d on t
he display correspon
ds
to a level o
f com
fort and not to a tem
perature in
degrees
Celsius or Fahrenheit.

On enterin
g the vehicle, if the interio
r
is ver
y co
ld or
hot, t
here
is no nee
d to
change the va
lue
displayed in or
der
to reach the re
quired level o
f com
fort.
The s
ystem corrects t
he temperature
difference automatically and as quickly
as possible.

Pr
ess
the "" and "" buttons to
chan
ge this value. A settin
g around
t
he value
21
ena
bles o
ptimum
com
fort to be obtained. However,
depen
ding on
your requ
irements, a
setting between 18 and 24 is usual.
 $XWRPDWLFYLVLELOLW
\
pro
gramme The automatic com
fort pro
gramme
may not be su
fficient
for rapid
demistin
g or de
frostin
g of the
windscreen an
d side w
indows
(humidity, several passengers, ice, etc.
).
In this case, select the automatic visibility
programme. The button
3
indicator lamp comes on.
The system automatically controls the air
conditionin
g and the flow of air and provides
o
ptimum a
ir distribution to t
he w
indscreen an
d
side
windows. It deac
tivates air recircula
tion 5.
To ex
it this pro
gramme, press
button
3again
or "AU TO "
, the indicator lamp on the button is"
switched o
ff and
"AUTO"is displaye
d.

85
Access
Do not throw the remote control
batter
ies awa
y, they conta
in meta
ls
which are harm
ful to the environment.
Take them to an a
pprove
d co
llect
ion
point.
Lost
keys
Visit a CITRO
ËN dealer with the vehicle's V5 re
gistration document and
your personal
identi
fication documents.

The CITRO
ËN dealer will be able to retrieve the key code and the transponder code
required to order a replacement key. Remote contro
l

The hi
gh frequenc
y remote control is a sensitive s
ystem; do not operate it while it is in
your
pocket as there is a possibility that it may unlock the vehicle, without you being aware o
f it.

Do not repeatedly press the buttons of your remote control out of range and out of sight of your vehicle. You run the risk of stopping it from working and the remote control would haveto be reiniti
alised
.

The remote control does not operate when the ke
y is in the i
gnition, even when the i
gnition
is switched off, except for reinitialisation.
Locking the vehicle
Driving with the doors locked may make access to the passenger compartment by the emer
genc
y services more difficult in an emer
genc
y.
As a safet
y precaution
(with children on board
), remove the ke
y from the i
gnition when
you
leave the vehicle, even
for a short time.

Anti-theft protection Do not make an
y modi
fications to the electronic en
gine immobiliser s
ystem; this could
cause mal
functions.

When purchasin
g a second-hand vehicle

Have the ke
y codes memorised b
y a CITRO
ËN dealer, to ensure that the ke
ys in
your
possess
ion are t
he on
ly ones w
hich can start t
he ve
hicle.

85
Access
Do not throw the remote control
batter
ies awa
y, they conta
in meta
ls
which are harm
ful to the environment.
Take them to an a
pprove
d co
llect
ion
point.
Lost
keys
Visit a CITRO
ËN dealer with the vehicle's V5 re
gistration document and
your personal
identi
fication documents.

The CITRO
ËN dealer will be able to retrieve the key code and the transponder code
required to order a replacement key. Remote contro
l

The hi
gh frequenc
y remote control is a sensitive s
ystem; do not operate it while it is in
your
pocket as there is a possibility that it may unlock the vehicle, without you being aware o
f it.

Do not repeatedly press the buttons of your remote control out of range and out of sight of your vehicle. You run the risk of stopping it from working and the remote control would haveto be reiniti
alised
.

The remote control does not operate when the ke
y is in the i
gnition, even when the i
gnition
is switched off, except for reinitialisation.
Locking the vehicle
Driving with the doors locked may make access to the passenger compartment by the emer
genc
y services more difficult in an emer
genc
y.
As a safet
y precaution
(with children on board
), remove the ke
y from the i
gnition when
you
leave the vehicle, even
for a short time.

Anti-theft protection Do not make an
y modi
fications to the electronic en
gine immobiliser s
ystem; this could
cause mal
functions.

When purchasin
g a second-hand vehicle

Have the ke
y codes memorised b
y a CITRO
ËN dealer, to ensure that the ke
ys in
your
possess
ion are t
he on
ly ones w
hich can start t
he ve
hicle.

85
Access
Do not throw the remote control
batter
ies awa
y, they conta
in meta
ls
which are harm
ful to the environment.
Take them to an a
pprove
d co
llect
ion
point.
Lost
keys
Visit a CITRO
ËN dealer with the vehicle's V5 re
gistration document and
your personal
identi
fication documents.

The CITRO
ËN dealer will be able to retrieve the key code and the transponder code
required to order a replacement key. Remote contro
l

The hi
gh frequenc
y remote control is a sensitive s
ystem; do not operate it while it is in
your
pocket as there is a possibility that it may unlock the vehicle, without you being aware o
f it.

Do not repeatedly press the buttons of your remote control out of range and out of sight of your vehicle. You run the risk of stopping it from working and the remote control would haveto be reiniti
alised
.

The remote control does not operate when the ke
y is in the i
gnition, even when the i
gnition
is switched off, except for reinitialisation.
Locking the vehicle
Driving with the doors locked may make access to the passenger compartment by the emer
genc
y services more difficult in an emer
genc
y.
As a safet
y precaution
(with children on board
), remove the ke
y from the i
gnition when
you
leave the vehicle, even
for a short time.

Anti-theft protection Do not make an
y modi
fications to the electronic en
gine immobiliser s
ystem; this could
cause mal
functions.

When purchasin
g a second-hand vehicle

Have the ke
y codes memorised b
y a CITRO
ËN dealer, to ensure that the ke
ys in
your
possess
ion are t
he on
ly ones w
hich can start t
he ve
hicle.

)
Turn t
hum
b wheel 1to the
"LIMIT"
position: the speed limiter mode is
selected but is not switched on (PAUSE).
You do not have to switch the speed limiter on
in order to set the speed. ) Set the speed value b
y pressin
g button
2
or 3(e.g.: 55 mph (90 km/h)).
Pro
grammin
g
You can then change the programmed speed using buttons
2 and
3 :
- by + or - 1 mph (km/h) = short press,
- by + or - 5 mph (km/h) = long press,
- in steps of + or - 5 mph
(km/h
) = maintained press.
)
Switch the speed limiter on b
y pressin
g button
4.
)
Switch the speed limiter o
ff by pressin
g button
4: the display
confirms that it has been switched o
ff (PAU
SE).
)
Switch the speed limiter back on by pressing button 4 aga
in.
Excee
di
ng t
he programme
d spee
d
Press
ing t
he acce
lerator pe
dal to excee
d the programme
d spee
d will not
have
any effect unless you press the pedal
firmly
past the y
point of resistance .
The speed limiter is deactivated temporarily and the programmed speed,
which is still displayed, flashes. Returning to the programmed speed, by means of intentional or unintentional deceleration of the vehicle, automatically cancels the flashin
g of the pro
grammed speed.
On a stee
p descent or in the event o
f
sharp acce
lerat
ion, t
he s
peed limiter
will
not
be a
ble to
prevent t
he ve
hicle
from exceeding the programmed speed. To avoid any risk of jamming of the pedals: - ensure that the mat is positioned
correctl
y,
- do not
fit one mat on to
p of another.
Leavin
g limiter mode
)
Turn th
umb wh
eel 1 to the "0" position:
t
he s
peed limiter mo
de is dese
lecte
d. The
display returns to t
he distance recor
der.
Operating
fault
In the event of a speed limiter malfunction, the speed is cleared resulting in flashing of thedas
hes.
Have the s
ystem checked b
y a CITROËN
deale
r.

Pro
grammin
g
)
Turn thumb wheel
1 to the
"CR
UISE"
position: the cruise control mode is selected but is not switched on (PAUSE).
)
Set the programmed speed by acceleratin
g to the required speed, then
press button
2or 3
(e.g.: 70 mph
(11 0 k m
/h)).
You can then change the programmed speed using buttons
2 and 3 :
- b
y + or - 1 mph
(km/h
) = short press,
- b
y + or - 5 mph
(km
/h) = lon
g press,
- in steps o
f + or - 5 mph
(km
/h) = maintained press.
)
Switch o
ff the cruise control b
y pressin
g button
4 : the display
confirms that it has been switched o
ff (PAU
SE).
)
Switch the cruise control back on b
y pressin
g button
4again.
Excee
di
ng t
he programme
d spee
d
Intentional or unintentional exceeding of the programmed speed results in flashing of this speed on the display. Return to the programmed speed, by means of intentional or unintentional deceleration of the vehicle, automatically cancels the flashing of the speed. Leaving cruise control mode )
Turn t
hum
b wheel 1 to t
he "
0"position: the cruise control mode is
deselected. The display returns to the distance recorder.
Operatin
g fault
In the event of a cruise control malfunction
,
the speed is cleared resultin
g in
flashin
g of the
dashes. Have it checked b
y a CITRO
ËN dealer.
Wh
en t
he cru
ise contro
l is sw
itched on,
be care
ful if you maintain the pressure
on one o
f the programmed speed
changing buttons: this may result in a very rapid change in the speed of your vehicle.
Do not use
the cruise control on
slipper
y roads or in heav
y tra
ffic.
On a stee
p descent, the cruise control
will
not
be a
ble to
prevent t
he ve
hicle
from exceeding the programmed speed. To avoid any risk o
f jamming o
f the
pedals: - ensure that the mat is positioned
correctly,
- never fit one mat on top of another.