boot CITROEN DS3 CABRIO 2015 Handbook (in English)
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2015, Model line: DS3 CABRIO, Model: CITROEN DS3 CABRIO 2015Pages: 404, PDF Size: 13.2 MB
Page 213 of 404

2 11
Changing a wheelProcedure for changing a faulty wheel for the spare wheel using the tools provided with the vehicle.
T he tools are installed in the boot under the
f
l o o r.
To
gain access to them:
F
o
pen the boot,
F
l
ift the boot carpet by pulling the strap
up
wards,
F
r
emove the polystyrene storage box,
F
u
nclip and remove the box containing the
to
ols.
Access to the tools
List of tools
All of these tools are specific to your vehicle. Do not use them for other purposes.
Wheel with trim
When removing the wheel , first
detach the trim using the wheelbrace 1
pulling
at the valve passage hole.
When refitting the wheel , refit the
trim
starting by placing its cut-out at the
v
alve and press around its edge with
t
he palm of your hand.
3.
"
Bolt cover" tool.
F
or removing the bolt protectors (covers)
o
n alloy wheels.
4.
S
ocket for the security wheel bolts (located
i
n
the glove box).
F
or adapting the wheelbrace to the special
s
ecurity wheel bolts (if your vehicle is fitted
w
ith them)
1.
W
heelbrace.
F
or
removing
the
wheel
trim
and
removing
t
he
wheel
fixing
bolts.
2.
J
ack
with
integral
handle.
F
or
raising
the
vehicle.
Practical information
Page 214 of 404

The spare wheel is installed in the boot under the floor.
According
to country, you will have either a
"
space saver" spare wheel or a temporary
p
uncture repair kit.
For
access to it, refer to the paragraph "Access
t
o the tools" on the previous page.
Access to the spare wheel
Fitting the "space-saver"
type spare wheel
If your vehicle is fitted with alloy wheels, it is normal to notice, when
t
ightening the bolts on fitting, that the
w
ashers do not come into contact with
t
he "space-saver" type spare wheel.
T
he wheel is secured by the conical
c
ontact of each bolt.
Taking out the wheel
F Unscrew the yellow central bolt.
F R aise the spare wheel towards you from
t
he rear.
F
T
ake the wheel out of the boot.
Page 215 of 404

213
Putting the wheel back in place
F Put the box back in place in the centre of t
he wheel and clip it.
F
P
ut the polystyrene storage box back in
p
lace.
F
R
efit the boot floor carpet by lightly folding
i
t in the middle (refer to the "Boot fittings"
s
ection).
F
P
ut
the
wheel
back
in
its
housing.
F
U
nscrew the yellow central bolt by a few
turns then place it in the centre of the
wheel.
F
T
ighten
fully
until
the
central
bolt
clicks
to
r
etain
the
wheel
correctly. On
vehicles equipped with a "space-
saver"
type spare wheel, the punctured
w
heel can be stowed in place of the
"
space-saver" wheel; however the boot
f
loor will not then be flat.
Practical information
Page 218 of 404

Fitting a wheel
After changing a wheel
To store the punctured wheel in the boot correctly, first remove the central
c
ove r.
When
using the "space-saver" type
t
emporary-use spare wheel, do not
e
xceed 50 mph (80 km/h).
Have
the tightening of the bolts and the
p
ressure of the spare wheel checked
b
y a CITROËN dealer or a qualified
w
orkshop without delay.
Have
the punctured wheel repaired and
r
eplace it on the vehicle as soon as
possible.
Do
not drive with more than one
t
emporary-use spare wheel fitted to the
v
ehicle at one time.
List of operations
F Put the wheel in place on the hub.
F S crew in the bolts by hand.
F
P
re-tighten the security bolt (if your vehicle
i
s fitted with them) using the wheelbrace 1
fitted
with the socket 4.
F
P
re-tighten the other bolts using the
w
heelbrace 1
o
n l y.
Page 226 of 404

1. Brake lamps / sidelamps (P21/5W).
2. Sidelamps (P5W).
3.
di
rection indicators (PY21W amber)
4.
F
oglamp, right hand side (PR21W red)
R
eversing lamp, left hand side (P21W).
Rear lamps
Amber or red bulbs, such as those for the direction indicators and rear
f
oglamp, must be replaced by bulbs of
t
he same rating and colour.
Changing bulbs
F Open the boot.
F R emove the access flap from the
c
orresponding side trim panel.
F
U
nscrew the butter fly nut securing the
lam
p
u
nit.
F
U
nclip the lamp unit connector.
F
E
xtract the lamp unit carefully pulling in its
m
iddle towards the outside. F
S pread the four tabs and remove the bulb h
o l d e r.
F
T
urn the bulb a quarter of a turn and
c
hange
it
.
To refit, carry out these operations in reverse
o r d e r.
Take
care to engage the lamp unit in its guides,
w
hile keeping it in line with the vehicle.
Page 227 of 404

225
Changing direction indicator (4)
and foglamp or reversing
lamp
(5) bulbs
F Turn the bulb a quarter turn and change it.
Changing LEd sidelamps and
brake lamps (LEds )
For the replacement of this type of LED lamp, c
ontact a CITROËN dealer or a qualified
w
orkshop.
3d rear lamps
Access to the bulbs
F Open the boot.
F R emove the access flap from the
c
orresponding side trim panel.
F
U
nscrew the butter fly nut securing the
lam
p
u
nit.
F
U
nclip the lamp unit connector.
F
E
xtract the lamp unit carefully pulling it in
l
ine towards the outside.
To refit, carry out these operations in reverse
o r d e r.
Take
care to engage the lamp unit in its guides,
w
hile keeping it in line with the vehicle.
1.
3
d
L
E
d
s
idelamps (LE
d
s).
2. L
Ed
brake lamps / sidelamps (LEds
).
3. L
E
d la
teral sidelamps (LE
d
s).
4.
di
rection indicators (PY21W amber)
5.
F
oglamp, right hand (H21W red)
R
eversing lamp, left hand (H21W).
Amber
or
red
bulbs,
such
as
those
f
or
the
direction
indicators
and
rear
f
oglamp,
must
be
replaced
by
bulbs
of
t
he
same
rating
and
colour.
Practical information
Page 228 of 404

Third brake lamp (4 W5W bulbs)
F Open the boot.
F R emove the plugs A on the inner panel.
F
P
ush on the centre of the lamp using two
s
crewdrivers to lever it outwards.
F
D
isconnect the connector and if necessary
t
he screenwash pipe from the lamp.
F
T
urn the bulb holder for the faulty bulb a
q
uarter of a turn.
F
P
ull out the bulb and change it.
To refit, carry out these operations in reverse
o r d e r.
Third brake lamp (LEds )
For the replacement of this type of LED lamp, c
ontact a CITROËN dealer or a qualified
w
orkshop.
Changing the number plate lamp
bulbs (W5W)
F Insert a thin screwdriver into one of the o
uter holes of the lens.
F
P
ush it outwards to unclip.
F
R
emove the lens.
F
P
ull the bulb out and change it.
Page 229 of 404

227
Interior lighting
Interior lamp (1 / W5W)
Detach the cover of the interior lamp 1 with a
t hin screwdriver, close to the button, to access
t
he failed bulb.
Map reading lamps (2 / W5W)
Detach the cover of the interior lamp 1. To a
ccess the failed bulb, detach the partition for
t
he reading lamp 2
c
oncerned.
Boot lamp (W5W)
Detach the unit by pushing it rear wards.
Footwell and central storage
illumination (W5W)
Detach the unit for access to the bulb.
Practical information
Page 242 of 404

Towing the vehicleProcedure for having your vehicle towed or for towing another vehicle using a removable towing eye.
T he towing eye is installed in the boot under
t
he floor.
To
gain access to it:
F
o
pen the boot,
F
r
aise the floor,
F
r
emove the polystyrene storage box,
F
r
emove the towing eye from the holder.
Access to the tools General recommendations
Observe the legislation in force in your country.
E nsure that the weight of the towing vehicle is higher than that of the towed vehicle.
The
driver must remain at the wheel of the towed vehicle and must have a valid driving licence.
When
towing a vehicle with all four wheels on the ground, always use an approved towing
a
rm; rope and straps are prohibited.
The
towing vehicle must move off gently.
When
towing a vehicle with the engine off, there is no longer any power assistance for
b
raking or steering.
In
the following cases, you must always call on a professional recovery service:
-
v
ehicle broken down on a motor way or fast road,
-
f
our-wheel drive vehicle,
-
w
hen it is not possible to put the gearbox into neutral, unlock the steering, or release
t
he parking brake,
-
t
owing with only two wheels on the ground,
-
w
here there is no approved towing arm available...
Page 248 of 404

A wide range of accessories and genuine parts is available from the CITROËN dealer network.
T hese accessories and parts are all suitable for your vehicle and benefit from CITROËN's recommendation and warranty.
accessories
"Comfort":
sun blinds, air deflectors, isotherm module, ashtray, fragrance cartridges, coat hanger fixed
t
o head restraint, front centre armrest, movable
m
irror, reading lamp, front and rear parking
s
ensors...
"Transport solutions":
boot liner, boot spacers, boot carpet, boot net,
transverse roof bars, bicycle carrier, ski carrier,
r
oof boxes, towbars, towbar wiring harnesses...
"Styling":
full grain leather steering wheel, coloured and carbotech dashboards, coloured and leather
g
ear lever knobs, aluminium footrest, spoiler,
a
lloy wheels, coloured wheel trims, coloured
w
heel caps, exterior expressive stickers,
e
xterior chrome kit, LED rear lamps kit...
*
T
o avoid any risk of jamming of the pedals:
-
e
nsure that the mat is positioned and
s
ecured
c
orrectly,
-
n
ever fit one mat on top of another.
"Security and safety":
anti-intrusion alarm, wheel security devices, vehicle tracking system, breathalyser, first aid
k
it, warning triangle, high visibility safety vest,
c
hild seats, snow chains, non-skid covers, fire
e
xtinguisher, pet seat belt, ...
"Protection":
mats*, mudflaps, seat covers, vehicle covers, bumper p rotectors...
When
fitting
a
towbar
outside
the
C
ITROËN
dealer
network,
the
i
nstallation
must
be
done
using
the
v
ehicle's
electrical
pre-equipment
and
f
ollowing
the
vehicle
manufacturer's
r
ecommendations.