display CITROEN DS3 CABRIO 2015 Handbook (in English)

05
Principal TMC symbols
Red and yellow triangle: traffic information, for example:
Black   and   blue   triangle:   general   information,   for   example:
Weather reports
Modified
  signage
Risk
  of   explosion Traffic
  reports
Narrow   carriageway
Road
  closed
Wind
Slippery surface
Demonstration Fog
Accident
Danger
Parking
d

elay
n

o entry Snow
  /   ice
Roadworks
Traffic
  jam
Receiving TA messages
The TA (Traffic  Announcement)   function   gives   priority   to  T A  alert  messages.
 T o   operate,   this   function   needs   good   reception   of   a  
radio

  station   transmitting   this   type   of   message.   When   a   traffic   report  
is

  transmitted,   the   current   audio   source   (Radio,   CD,   USB,   ...)   is  
interrupted

  automatically   to   play   the  
T
A
 
message.   Normal   playback  
of

  the   audio   source   resumes   at   the   end   of   the   transmission   of   the  
message.Press

RA d IO   to   display   the   menu.
Select "Service announcements" then
confirm.
Activate
  or   deactivate   "TA"
  then   confirm.
The
  volume   setting   for  
T
A
 
messages   can   be   adjusted   only   during   the  
transmission

  of   this   type   of   alert.
Activate
  or   deactivate   the   function   at   any   time   by   pressing  
the

  button.
During
  a   message,   press   the   button   to   interrupt   it.
TRAFFIC INFORMATION

06
307
Access to the "TELEPHONE" menu
"Telephone"" d ial"
"
d irectory of contacts"
"Contacts management "
"Phone functions "
"Bluetooth functions "
"Hang up "
Go
  from   the   list   to   the   menu   (left/right).
or
List
 
of
 
recent
 
calls
 
sent
 
and  
received

 
with
 
the
 
telephone  
connected

 
to
 
the
 
system.
Press
 
this
 
button.
To
 
make
 
a
 
call,
 
select
 
a
 
number
 
in
 
the
 
list
 
and
 
confirm
 
" OK"
to
 
start
 
the
 
call.
Connecting
 
a
 
different
 
telephone
 
deletes
 
the
 
list
 
of
 
recent

 
calls. No
  telephone   connected.
Telephone
  connected.
Incoming
  call.
Outgoing
  call.
Synchronisation of
contacts
  in   progress.
Telephone call in
progress.
In the top bar of the permanent
display
USING THE TELEPHONE

06USING THE TELEPHONE
Pairing a Bluetooth telephone
First connectionFor reasons of safety and because they require prolonged attention on  the   part   of   the   driver,   the   operations   for   pairing   the   Bluetooth  
mobile

  telephone   to   the   hands-free   system   of   the   audio   unit   must   be  
carried

  out   with   the  
vehicle stationary
.
In
 
the
 
Bluetooth
 
menu
 
of
 
your
 
telephone,
 
select
 
the
 
name

 
"C
ITR
o
Ë
n"
 
from
 
the
 
list
 
of
 
devices
 
detected. Press
  this   button.
Select "Bluetooth functions "
  and  
confirm.
Select "

Peripherals search "
  and  
confirm.
The

  list   of   peripheral   devices   detected  
is

  displayed.   Wait   until   the   "Connect"
button
  is   available.
You
 
can
 
check
 
the
 
compatibility
 
of
 
your
 
telephone
 

at

 
www.citroen.co.uk
 
(services).
a

ctivate the telephone's b luetooth function
and
  ensure   that   it   is   "visible   to   all"   (telephone  
configuration).
Quick procedure from the telephone
Enter

 
a
 
minimum
 
4
 
figure
 
code
 
in
 
the
 
telephone
 
and
 
confirm. Enter

 
the
 
same
 
code
 
in
 
the
 
system,
 
select "

OK"
 
and
 
confirm. Procedure from the system

06USING THE TELEPHONE
directory configuration / Synchronisation with the telephone
Press PHONE then select "Contacts
management"  and   confirm.
Select "New contact" to enter a new
contact.
Select "Sort by Name/First name" or
"Sort by First name/Name" to choose
the
  order   in   which   they   appear.
Select "
d elete all contacts"   to   delete  
the

  contacts   saved   in   the   system. Select "Synchronization options
":
-
 
No
  synchronization:   only   the  
contacts

  saved   in   the   system  
(always

  present).
-
 
Display
  telephone   contacts:   only   the  
contacts

  saved   in   the   telephone.
-
 
Display
  SIM   card   contacts:   only   the  
contacts

  saved   on   the   SIM   card.
-
 
Display
  all   phone   contacts:  
contacts

  on   the   SIM   card   and   in   the  
telephone.
Select "

Import all the entries"   to   import  all
  the   contacts   in   the   telephone   and  save
  them   in   the   system.
Once
  imported,   a   contact   remains   visible  
whatever

  telephone   is   connected.
Select "Contact mem. status" to see the
number
  of   contacts   saved   in   the   system  
or

  imported,   and   the   free   memory.

06
313
USING THE TELEPHONE
Calling a recently entered numberPress TEL, select "Call list"   and  
confirm,
Select

  the   desired   number   and   confirm.
To
  erase   the   calls   log,   press  
PHONE
twice, select "Phone
functions"
  and   confirm   then   select   " d elete calls log"   and   confirm.
Ending a call
Press PHONE then select "OK" to end the  call.
Or
  make   a   long   press   on   TEL at the
steering
  mounted   controls.
Or
  make   two   short   presses   on   TEL at
the
  steering   mounted   controls.
o

r press the MO d E   button,   as   many  
times

  as   necessary,   until   the   telephone  
screen

  is   displayed.
Press PHONE
 
to
 
display
 
the
 
calls
 
log.
or
Press "OK"
  to   display   the   contextual  
menu

  then   select   "Hang up"   and  
confirm.
It

 
is
 
always
 
possible
 
to
 
start
 
a
 
call
 
directly
 
from
 
the
 
telephone;
 
park
 
the

 
vehicle
 
as
 
a
 
safety
 
measure.

06USING THE TELEPHONE
Receiving a call
An incoming call is announced by a ring and a superimposed display on  the   screen.
"Ye s"
  to   accept   the   call   is   selected   by  
default.
Press "

OK"   to   accept   the   call.
Select "No"
  and   confirm   to   reject   the  
call.
a short press on

TEL accepts an
incoming
  call.
A
 

long   press   on  
TEL
  rejects   an   incoming  
call.

06
315
Options during a call*
During a call, press the MOd E button
several   times   to   select   display   of   the  
telephone screen, then press "OK

" to
open
  the   contextual   menu.
Select "Private mode"
  and   confirm   to  
take

  the   call   on   the   handset.
o

r select "Hands-free mode"   and  
confirm

  to   take   the   call   via   the   vehicle's  
speakers.
Select "

Put call on hold "
  and   confirm   to  
put

  the   current   call   on   hold.
o

r select "Resume the call"   and  
confirm

  to   resume   the   call   on   hold. Select "
d TMF ring tones
" to use the
numerical   keypad,   so   as   to   navigate  through
  the   menu   of   an   interactive   vocal  
server

.
Select "Hang up"
  to   end   the   call.
*
  Depending   on   the   compatibility   of   the   phone   and   your   service   plan.
it
  is   possible   to   hold   a   3-way   conference  
call

  by   making   2   calls   in   succession*.  
Select "

Conference mode call" in the
contextual
  menu   accessible   using   this  
button.
Or

  make   a   short   press   on   this   button.
USING THE TELEPHONE

07
By alphabetical list
Press RAd IO, select the station of your
choice
  and   confirm.
By automatic frequency search
Press 7 or 8
  for   the   automatic   search  
for

  a   lower   or   higher   radio   frequency.
Or
  turn   the   thumb   wheel   at   the   steering  
mounted

  controls.
By manual frequency search
Press 5 or 6
  to   adjust   the   radio  
frequency

  step   by   step.
Selecting a station
The external environment (hill, building, tunnel, underground car park...) may interfere with the reception, including in RDS station tracking mode. This phenomenon  is   a   normal   result   of   the   way   in   which   radio   waves   are   transmitted   and   does   not   in   any   way   indicate   a   fault   with   the   audio   system.
The
  quality   of   reception   is   represented   by   the   number   of  
active

  waves   in   this   symbol.
Press RA
d IO or OK   to   display   the  
contextual

  menu.
Changing waveband
Select "Change waveband".
Select "AM / FM"  and   confirm.
RAdIO

08
321
Cd, MP3 Cd / USB player
The audio equipment will only play audio files with ".wma, .aac, .flac, .ogg  and   .mp3"   file   extensions   and   with   a   bit   rate   of   between   32   Kbps  
and

  320   Kbps.
It
  also   supports   VBR   (Variable   Bit   Rate)   mode.
No
  other   type   of   file   (.mp4,   .m3u...)   can   be   played.
WMA
 

files   must   be   of   the   standard   wma   9   type.
The
  sampling   rates   supported   are   greater   than   32   KHz.
It
  is   advisable   to   restrict   file   names   to   20   characters,   without   using   of  
special

  characters   (e.g.:   "   "   ?   ;   ù)   to   avoid   any   playing   and   displaying  
problems.
In

  order   to   be   able   to   play   a   recorded   CDR   or   CDRW,   when   recording  
it

  is   preferable   to   select   the   ISO   9660   level   1,   2   or   Joliet   standard.
If
  the   disc   is   recorded   in   another   format   (udf, ...),   it   may   not   be   played  
correctly

.
It
  is   recommended   that   the   same   recording   standard   is   always   used  
for

  an   individual   disc,   with   as   low   a   speed   as   possible   (4x   maximum)  
for

  optimum   sound   quality.
In
  the   particular   case   of   a   multi-session   CD,   the   Joliet   standard   is  
recommended.Information and advice
The
  system   supports   USB   mass   storage   or   iPod  
devices

  via   the   USB   port   (suitable   cable   not   supplied).
If
  a   partitioned   USB   memory   key   is   connected   to   the  
system,

  only   the   first   partition   is   recognised.
Control
  of   the   peripheral   device   is   with   the   audio  
system

  controls.
The
  number   of   tracks   is   limited   to   2000   maximum,  

999

  tracks   per   folder.
If
  the   current   consumption   at   the   USB   port   exceeds  
500

  mA,   the   system   goes   into   protection   mode   and  
deactivates

  the   port.
Other
  peripherals,   not   recognised   on   connection,   must  
be

  connected   to   the   auxiliary   socket   using   a   Jack   cable  
(not

  supplied).
Give
  preference   to   multimedia   USB   memory   sticks   (in   general  
formatted

  FAT
 
32   File  
Allocation
 
T
able).
The
  system   does   not   support   the   operation   of   an  
Apple® player and a USB
 
memory
 
stick
 
connected
 
at
 
the
 
same
 
time.
It
 
is
 
recommended
 
that
 
official
 
Apple® USB cables are used to ensure correct
 
operation.
MUSIC MEdIA PLAYERS

08
Insert the Cd in the player, insert the USb
memory   stick   in   the   USB   player   or   connect   the  
USB

  peripheral   to   the   USB   port   using   a   suitable  
cable

  (not   supplied).
The
  system   builds   playlists   (in   temporary  
memory),

  an   operation   which   can   take   from  
a

  few   seconds   to   several   minutes   at   the   first  
connection.
Reduce

  the   number   of   non-music   files   and   the  
number

  of   folders   to   reduce   the   waiting   time.
The
  playlists   are   updated   every   time   the   ignition  
is

  switched   off   or   connection   of   a   USB   memory  
stick.

  However,   the   system   memorises   these  
lists

  and   if   they   are   not   modified,   the   loading  
time

  will   be   shorter.
Play
  starts   automatically   after   a   period   which  
depends

  on   the   capacity   of   the   USB   memory  
stick. Selection of source
The
SOURCE   button   on   the   steering   mounted   controls   allows   a  direct
  change   to   the   next   media   source.
"C d / C d MP3"
"USB, iPod "
"AUX"
"STREAMING"
"RA
d IO"
Press MUSIC
  to   display   the   "ME d IA"
menu.
Select "Following media source "
  and  
confirm.
Repeat

  the   operation   as   many   times   as   necessary   to   obtain   the  
desired

  media   source   (except   for   radio   which   is   accessible   either  
with

SOURCE or RA d IO).
Sources
MUSIC MEdIA
PLAYERS