stop start CITROEN DS3 CABRIO DAG 2016 Handbook (in English)

DS3_en_Chap00b_vue-ensemble_ed01-2015
Exterior
Customising kits
These expressive stickers form part   of   a   range   of   kits,   very  
d

ifferent   one   from   another,   which  
a

llow   you   to   create   a   unique  
a

nd   attractive   exterior   for   your  
v

ehicle.
guide-me-home lighting
After switching off the ignition, under low lighting conditions the headlamps remain   on   for   a   few   seconds   to   help   you   leave   the   vehicle.
Active City Brake
The purpose of this system is to avoid a frontal   collision   or   reduce   the   speed   of   impact  
i

f the driver fails to react or does not react
sufficiently.
233
13 3 153
Stop & Start
This system puts the engine t
emporarily   on   standby   during  
s

tops   in   the   traffic   (red   lights,   traffic  
j

ams,   etc...).   The   engine   restarts  
a

utomatically   as   soon   as   you   want  
t

o   move   off.   The   Stop   &   Start   system  
r

educes   fuel   consumption,   exhaust  
e

missions   and   the   noise   level   when  
s

tationary. 11 6

DS3_en_Chap01_controle-de-marche_ed01-2015
Warning/indicator lampis on Cause Action / Observations
di

esel engine
pre-heating fixed.
The
  key   is   at   position   2   (ignition   on)   in  
t

he   ignition   switch.Wait
  until   the   warning   lamp   goes   off   before   starting.
The
  period   of   illumination   of   the   warning   lamp   is  
d

etermined   by   the   climatic   conditions   (up   to   about  
t

hirty   seconds   in   extreme   climatic   conditions).
If
  the   engine   does   not   start,   switch   the   ignition   off   and  
t

hen   on,   wait   until   the   warning   lamp   goes   off   again,  
t

hen   start   the   engine.
Parking brake fixed. The
  parking   brake   is   applied   or   not  
p

roperly
 r
eleased.Release
  the   parking   brake   to   switch   off   the   warning  
l

amp,   keeping   your   foot   on   the   brake   pedal.
Observe
  the   safety   recommendations.
For
  more   information   on   the   parking   brake,   refer   to   the  
c

orresponding
 s
ection.
Stop & Star t fixed. When
  the   vehicle   stops   (red   lights,
 t

raffic   jams,   ...)   the   Stop   &   Start   system
 h

as   put   the   engine   into   STOP   mode.The
  warning   lamp   goes   off   and   the   engine   restarts  
a

utomatically   in   START   mode,   as   soon   as   you   want   to  
m

ove   off.
flashes for a few
seconds,
  then   goes  
o

f f.STOP
  mode   is   temporarily  
u

navailable.
or
START
  mode   is   invoked  
au

tomatically.For
  more   information   on   special   cases   with   STOP  
m

ode   and   START   mode,   refer   to   the   "Stop   &   Start"  
s

ection.

DS3_en_Chap01_controle-de-marche_ed01-2015
Brakingfixed,   associated   with  t
he   STOP   warning  
lam

p.The
  braking   system   fluid   level   is   too  l
ow.You
  must   stop   as   soon   as   it   is   safe   to   do   so.
Top   up   with   brake   fluid   recommended   by   CITROËN.
If
  the   problem   persists,   have   the   system   checked   by   a  
C

ITROËN   dealer   or   a   qualified   workshop.
+ fixed,
  associated   with  
t

he STOP and ABS
warning
 lam

p.The
  electronic   brake   force   distribution  
(

EBFD)   system   has   a   fault.You
  must   stop   as   soon   as   it   is   safe   to   do   so.
Have
  it   checked   by   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
Warning
/indicator lampis on Cause Action / Observations
Anti-lock Braking
System (ABS) fixed.
The
  anti-lock   braking   system   has   a  
f

ault.The
  vehicle   retains   conventional   braking.
Drive carefully at reduced speed and contact a
CITROËN
 d

ealer
 o
r
 a q
ualified
 w
orkshop
 w
ithout
 d
elay.
dy

namic stability
control (
dS

C/
ASR) flashing.
Regulation
  by   the   system   is   active. The   system   optimises   traction   and   improves   the  
d

irectional   stability   of   the   vehicle.
fixed,
  associated   with  
i

llumination   of   the  
i

ndicator   lamp   in   the  
d

eactivation button,
accompanied
  by   an  
a

udible   signal   and   a  
m

essage. The
  DSC/ASR   or   hill   start   assist  
s

ystem   has   a   fault.Have
  it   checked   by   a   CITROËN   dealer   or   a   qualified  
w

orkshop.

29
DS3_en_Chap01_controle-de-marche_ed01-2015
Warning/indicator lampis on Cause Action / Observations
Engine
autodiagnosis
system flashing.
The
  engine   management   system   has  
a

  fault.Risk
  of   destruction   of   the   catalytic   converter.
Have
  it   checked   by   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
fixed. The
  emission   control   system   has   a  
f

ault.
The warning lamp should go off when the engine is started.
I f   it   does   not   go   off,   contact   a   CITROËN   dealer   or   qualified w

orkshop   without   delay.
Low fuel level fixed. When   it   first   comes   on   there   remains  a
pproximately 5 litres of fuel in the
tank. You
  must   refuel   as   soon   as   possible   to   avoid   running o
ut   of   fuel.
This
  warning   lamp   will   come   on   every   time   the   ignition   is
 s

witched   on,   until   a   sufficient   addition   of   fuel   is   made.
Fuel
  tank   capacity:   approximately   50   litres   (petrol),
 
4

6   litres   (Diesel)   or   33   litres   (LPG);   depending   on
 v

ersion:   approximately   30   litres   (petrol   or   Diesel).
Never continue to drive until you run out of fuel as
this
  could   damage   the   emission   control   and   injection
 s

ystems.
Maximum coolant
temperature fixed.
The
 
t
emperature  
o
f  
t
he  
c
ooling  
s
ystem  
i

s   too   high.Stop
  as   soon   as   it   is   safe   to   do   so.
Wait
  until   the   engine   has   cooled   down   before   topping  
u

p   the   level,   if   necessary.
If
  the   problem   persists,   contact   a   CITROËN   dealer   or  
q

ualified
 w
orkshop.
Monitoring

55
DS3_en_Chap01_controle-de-marche_ed01-2015
Monochrome screen C
Information displays
F Press the button, located at the end of the wiper stalk , to display the various trip
computer
  tabs   in   succession: -
 
t
he   current   information   tab  
w

ith:
●  
t
he   range,
●  
t
he   current   fuel  
c

onsumption,
●  
t
he   distance   remaining  
to be travelled or the
Stop   &   Start   time   counter,
-
t
he trip "1"
 
tab   with:
●  
t
he   distance   travelled,
●  
t
he   average   fuel  
c

onsumption,
●  t he   average   speed, f
or   the   first   trip.
-

t
he trip "2"
 
tab   with:
●
 
t
he   distance   travelled,
●
 
t
he   average   fuel  
c

onsumption,
●
 
t
he   average   speed,
 f

or   the   second   trip.
F
 
P
ressing   the   button   again   returns   you   to  
t

he   normal   display.
Zero reset
F When  the   trip   required   is   displayed,   press  t
he   button   on   the   end   of   the   wiper   stalk   for  
m

ore   than   two   seconds.
Tr i p s "1" and "2" are independent but their use
is
  identical.
For
  example,   trip   "1" can be used for daily
figures,
  and   trip   "2"
 
for   monthly   figures.
Monitoring

DS3_en_Chap01_controle-de-marche_ed01-2015
Touch screen tablet
Information display
F Press the MEnU button, then select
"dr iving",
  to   display   the   various   tabs.
F
 
S
elect   the   desired   tab   using   your   finger.-

T
he "
Instantaneous "   tab   with:
●  
t
he   range,
●  
t
he   current   fuel   consumption,
●  
t
he   Stop   &   Start   time   counter.
-
T
he "
Tr i p 1 "   tab   with:
●  
t
he   distance   travelled.
●  
t
he   average   fuel   consumption,
●  
t
he   average   speed,  
 
f
or   the   first   trip.
-
T
he "Tr i p 2 "
  tab   with:
●
 
t
he   distance   travelled.
●
 
t
he   average   fuel   consumption,
●
 
t
he   average   speed,  
 
f

or   the   second   trip.
Trip reset
F When the desired trip is displayed, press the   reset   button.
Tr i p s "1" and "2" are independent but their use
is
  identical.
For
  example,   trip   "1" can be used for daily
figures,
  and   trip   "2"
 
for   monthly   figures.

57
DS3_en_Chap01_controle-de-marche_ed01-2015
Trip computer, a few definitions
Range
(miles or km)
Current fuel consumption
(mpg or l/100 km or km/l)
Stop & Start time
counter
(minutes / seconds or hours / minutes)
This
 
value
 
may
 
vary
 
following
 
a
 
change
 
i

n
 
the
 
style
 
of
 
driving
 
or
 
the
 
relief,
 
r

esulting
 
in
 
a
 
significant
 
change
 
in
 
the
 
c

urrent
 
fuel
 
consumption.
If dashes are displayed continuously
while
 
driving
 
in
 
place
 
of
 
the
 
digits,
 
c

ontact a CITROËN dealer or a
qualified
 w

orkshop.
When
 
the
 
range
 
falls
 
below
 
20
 
miles
 
(30
 
km),
 
d

ashes
 
are
 
displayed.
 
After
 
filling
 
with
 
at
 
least
 
5

 
litres
 
of
 
fuel,
 
the
 
range
 
is
 
recalculated
 
and
 
is
 
d

isplayed
 
when
 
it
 
exceeds
 
60
 
miles
 
(100
 
km).
distance remaining to
destination
(miles or km)
T
he distance which can still be travelled with
the
 
fuel
 
remaining
 
in
 
the
 
tank
 
(related
 
to
 
the
 
a

verage
 
fuel
 
consumption
 
over
 
the
 
last
 
few
 
m

iles
 (

kilometres)
 t

ravelled). Calculated
 
over
 
the
 
last
 
few
 
seconds.
This
 
is
 
the   distance   remaining   to   be   travelled  
t

o
 
the
 
final   destination.   It   can   be   entered   by  
t

he user.
If the distance is not entered, dashes are
displayed
  in   place   of   the   digits.
If
 
your
 
vehicle   is   fitted   with   Stop   &   Start,   a   time  
c

ounter
 
calculates   the   time   spent   in   STOP  
m

ode
 
during   a   journey.  
I

t
 
resets
 
to   zero   every   time   the   ignition   is  
s

witched
 
on   with   the   key.
distance travelled
(miles or km)
C
alculated
 
since   the   last   trip   computer   reset.
Average speed
(mph or km/h)
C
alculated   since   the   last   trip   computer   reset.
Average fuel
consumption
(mpg or l/100 km or km/l)
C
alculated
 
since   the   last   trip   computer   reset.
This
 
function   is   only   displayed   from  
2

0 mph
  (30   km/h).
Monitoring

63
DS3_en_Chap02_ouvertures_ed01-2015
Do not throw the remote control batteries   away,   they   contain   metals  
w

hich   are   harmful   to   the   environment.
Take
  them   to   an   approved   collection  
po

int.Lost keys
Go to a CITROËN dealer with the vehicle's registration document, your personal identification   documents   and   if   possible   the   key   code   label.
The
  CITROËN   dealer   will   be   able   to   look   up   the   key   code   and   the   transponder   code  
r

equired   to   order   a   new   key.
Remote control
The high frequency remote control is a sensitive system; do not operate it while it is in your pocket   as   there   is   a   possibility   that   it   may   unlock   the   vehicle,   without   you   being   aware   of   it.
Do
  not   repeatedly   press   the   buttons   of   your   remote   control   out   of   range   and   out   of   sight   of  
y

our   vehicle.   You   run   the   risk   of   stopping   it   from   working   and   the   remote   control   would   have  
t

o   be   reinitialised.
No
  remote   control   can   operate   when   the   key   is   in   the   ignition   switch,   even   when   the   ignition  
i

s   switched   off,   except   for   reinitialisation.
Locking the vehicle
Driving with the doors locked may make access to the passenger compartment by the emergency   services   more   difficult   in   an   emergency.
As
  a   safety   precaution,   never   leave   children   alone   in   the   vehicle,   except   for   a   very   short
 p

eriod.
In
  all   cases,   it   is   essential   to   remove   the   key   from   the   ignition   switch   when   leaving   the   vehicle.
Anti-theft protection
Do not make any modifications to the electronic engine immobiliser system; this could cause m alfunctions.
When purchasing a second-hand vehicle
Have the pairing of all of the keys in your possession checked by a CITROËN dealer, to ensure   that   only   your   keys   can   be   used   to   open   and   start   the   vehicle.
Access

DS3_en_Chap03_confort_ed01-2015
The heating / ventilation or air conditioning systems operates with the engine running, as well as in STOP mode with Stop & Start.
1. Temperature adjustment
F Turn  the   dial   from   blue  (
cold)   to   red   (hot)   to   adjust  
t

he   temperature   to   your  
r

equirements.
2. Air flow adjustment
F Turn   the   dial   from   position   1
to position 5 to obtain a
comfortable
  air   flow.
F

I

f you place the air flow control
in position 0
  (deactivation   of   the  
s

ystem),   the   temperature   is   no  
l

onger   maintained   at   a   comfortable  
l

evel.   However,   a   slight   flow   of   air,  
d

ue  
t
o  
t
he  
m
ovement  
o
f  
t
he  
v
ehicle,  
c

an   still   be   felt.
3. Air distribution adjustment
Windscreen and side windows.
W indscreen, side windows and
footwells.
Footwells.
Central
  and   side   vents.
The air distribution can be
adapted
  by   placing   the   dial  
i

n   an   intermediate   position.
4. Air intake / Air recirculation
The intake of exterior air avoids the formation of   mist   on   the   windscreen   and   side   windows.
The recirculation of interior air insulates the
passenger
  compartment   from   exterior   odours  
a

nd   smoke.
Return
  to   exterior   air   intake   as   soon   as   possible  
t

o   prevent   deterioration   of   the   air   quality   and  
t

he   formation   of   mist.
Manual control panel F
 
M
ove   the   manual   control   to  
t

he   left   to   be   in   the   "recycling  
i

nterior   air"   position.
F
 
M
ove   the   manual   control   to   the  
r

ight   to   return   to   the   "fresh   air  
i

ntake"   position.

DS3_en_Chap03_confort_ed01-2015
Digital air conditioningThe air conditioning operates when the engine is running, as well as in STOP mode with Stop & Start.
Automatic operation
1. Automatic "comfort" programme
Press the "AUTO"  button.  T
he "AUTO"  symbol   is   displayed. For
  your   comfort,   when   the   engine   is  
s

witched   off,   the   settings   are   retained  
u

ntil   the   engine   is   switched   on   again.
To   prevent   too   great   a   distribution   of  
c

old   air   when   the   engine   is   cold,   the   air  
f

low   will   only   reach   its   optimum   level  
g

radually.
2. Temperature adjustment
The value indicated on the display corresponds
to
  a   level   of   comfort   and   not   to   a   temperature   in  
d

egrees   Celsius   or   Fahrenheit. On
  entering   the   vehicle,   if   the   interior  
i

s very cold or hot, there is no need to
change   the   value   displayed   in   order  
t

o   reach   the   required   level   of   comfort.  
T

he   system   corrects   the   temperature  
d

ifference   automatically   and   as   quickly  
a

s   possible.
Press the " 5" and " 6" buttons to
change
  this   value.   A   setting   around  
t

he value 21
 
enables   optimum  
c

omfort   to   be   obtained.   However,  
d

epending   on   your   requirements,   a  
s

etting   between   18   and   24   is   usual.
3. Automatic "visibility" programme
The automatic comfort programme m
ay   not   be   sufficient   for   rapid  
d

emisting   or   defrosting   of   the  
w

indscreen and side windows
(humidity,
  several   passengers,   ice,  
e

t c .) .
With
  Stop   &   Start,   when   demisting   has  
b

een   activated,   the   STOP   mode   is   not  
a

vailable.
In
 
this
 
case,   select   the   automatic   visibility  
p

rogramme.   The   button   3   indicator   lamp  
comes
 
on.
The
 
system   automatically   controls   the   air  
c

onditioning   and   the   flow   of   air   and   provides  
o

ptimum
 
air   distribution   to   the   windscreen   and  
s

ide
 
windows.   It   deactivates   air   recirculation   5.
To
 
exit
 
this   programme,   press   button   3   again  
or "AUTO" ,
  the   indicator   lamp   on   the   button  
g

oes
 
off
 
and   "AUTO"
 
is   displayed.
We
 
recommend
 
that
 
you
 
use
 
this
 
mode.
 
I

t
 
provides
 
optimised
 
automatic
 
control
 
of
 
a

ll
 
of
 
the
 
following
 
functions:
 
passenger
 
c

ompartment
 
temperature,
 
air
 
flow,
 
air
 
d

istribution
 
and
 
air
 
intake,
 
in
 
accordance
 
with
 
t

he
 
comfort
 
value
 
that
 
you
 
have
 
chosen.
This
 
system
 
is
 
designed
 
to
 
operate
 
effectively
 
i

n
 
all
 
seasons,
 
with
 
the
 
windows
 
closed.