topping up Citroen DS3 RHD 2016 1.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2016, Model line: DS3 RHD, Model: Citroen DS3 RHD 2016 1.GPages: 380, PDF Size: 10.11 MB
Page 31 of 380

29
Warning/indicator lampis on Cause Action / Observations
Engine
autodiagnosis
system flashing.
The
 engine  management  system  has Â
a
 fault.Risk
 of  destruction  of  the  catalytic  converter.
Have
 it  checked  by  a  CITROËN  dealer  or  a  qualified Â
w
orkshop.
fixed. The
 emission  control  system  has  a Â
f
ault.
The warning lamp should go off when the engine is started.
I f  it  does  not  go  off,  contact  a  CITROËN  dealer  or  qualified w
orkshop  without  delay.
Low fuel level fixed. When  it  first  comes  on  there  remains  a
pproximately 5 litres of fuel in the
tank. You
 must  refuel  as  soon  as  possible  to  avoid  running o
ut  of  fuel.
This
 warning  lamp  will  come  on  every  time  the  ignition  is
 s
witched  on,  until  a  sufficient  addition  of  fuel  is  made.
Fuel
 tank  capacity:  approximately  50  litres  (petrol)
Â
o
r  46  litres  (Diesel);  depending  on  version:
 a
pproximately  30  litres  (petrol  or  Diesel).
Never
 continue  to  drive  until  you  run  out  of  fuel  as
 t
his  could  damage  the  emission  control  and  injection
 s
ystems.
Maximum coolant
temperature fixed.
The
Â
t
emperature Â
o
f Â
t
he Â
c
ooling Â
s
ystem Â
i
s  too  high.Stop
 as  soon  as  it  is  safe  to  do  so.
Wait
 until  the  engine  has  cooled  down  before  topping Â
u
p  the  level,  if  necessary.
If
 the  problem  persists,  contact  a  CITROËN  dealer  or Â
q
ualified
 w
orkshop.
Monitoring
Page 35 of 380

33
Warning/indicator lampis on Cause Action / Observations
AdBlue
® additive
(BlueH
d i d iesel) fixed,
 on  switching  o
n  the  ignition, Â
a
ccompanied  by  an Â
a
udible  signal  and  a Â
m
essage  indicating Â
t
he
 r
emaining
 d
riving
 ra
nge. The
 remaining  driving  range  is  b
etween  350  miles  (600  km)  and Â
1500
 miles  (2400  km).Have
 the  AdBlue® additive tank topped up as soon a
s
Â
possible:
Â
go
Â
to
 a  CITROËN  dealer  or  a  qualified Â
w
orkshop,
Â
or
Â
carry  out  this  operation  yourself.
+ flashing
 a
ssociated
 w
ith
 t
he
Â
SERVICE
Â
warning
 l
amp,
Â
accompanied
Â
by
 a
n
Â
audible
Â
signal
Â
and
 a
Â
message
Â
indicating
 t
he
 r
emaining
 d
riving
 ra
nge. The
Â
remaining
Â
driving
Â
range
Â
is
Â
b
etween
Â
0
Â
and
Â
350
Â
miles
Â
(600
Â
km). You
Â
must
Â
top-up the Â
Ad
Blue
® additive tank to avoid
a
breakdown :
Â
go
Â
to
Â
a
Â
CITROËN  dealer  or  a  qualified Â
w
orkshop,
Â
or
Â
carry
Â
out
Â
this
Â
operation  yourself.
flashing,
Â
associated
Â
w
ith the SERVICE
warning
 lam
p,
 a
ccompanied
Â
by
Â
an
Â
a
udible
Â
signal
Â
and
Â
a
Â
m
essage
Â
indicating
Â
t
hat
Â
starting
Â
is
Â
p
revented. The
Â
AdBlue
® tank is empty: the s
tarting
Â
inhibition  system  required Â
b
y
Â
legislation  prevents  starting  of  the Â
e
ngine. To
 be  able  to  start  the  engine,  you  must  top-up the
AdBlue® additive tank: go to a CITROËN dealer or a q
ualified  workshop,  or  carry  out  this  operation  yourself.
It is essential
Â
to  add  at  least  3.8  litres  of  AdBlue
® to
the
Â
additive
Â
tank.
For
Â
topping-up
Â
or
Â
for
Â
more
Â
information
Â
on
Â
the
Â
AdBlue
® additive, refer to the corresponding section.
Monitoring
Page 65 of 380

63
Do not throw the remote control batteries  away,  they  contain  metals Â
w
hich  are  harmful  to  the  environment.
Take
 them  to  an  approved  collection Â
po
int.Lost keys
Go to a CITROËN dealer with the vehicle's registration document, your personal identification  documents  and  if  possible  the  key  code  label.
The
 CITROËN  dealer  will  be  able  to  look  up  the  key  code  and  the  transponder  code Â
r
equired  to  order  a  new  key.
Remote control
The high frequency remote control is a sensitive system; do not operate it while it is in your pocket  as  there  is  a  possibility  that  it  may  unlock  the  vehicle,  without  you  being  aware  of  it.
Do
 not  repeatedly  press  the  buttons  of  your  remote  control  out  of  range  and  out  of  sight  of Â
y
our  vehicle.  You  run  the  risk  of  stopping  it  from  working  and  the  remote  control  would  have Â
t
o  be  reinitialised.
No
 remote  control  can  operate  when  the  key  is  in  the  ignition  switch,  even  when  the  ignition Â
i
s  switched  off,  except  for  reinitialisation.
Locking the vehicle
Driving with the doors locked may make access to the passenger compartment by the emergency  services  more  difficult  in  an  emergency.
As
 a  safety  precaution,  never  leave  children  alone  in  the  vehicle,  except  for  a  very  short
 p
eriod.
In
 all  cases,  it  is  essential  to  remove  the  key  from  the  ignition  switch  when  leaving  the  vehicle.
Anti-theft protection
Do not make any modifications to the electronic engine immobiliser system; this could cause m alfunctions.
When purchasing a second-hand vehicle
Have the pairing of all of the keys in your possession checked by a CITROËN dealer, to ensure  that  only  your  keys  can  be  used  to  open  and  start  the  vehicle.
Access
Page 93 of 380

91
It is possible to adjust one or more functions manually  while  leaving  the  other  functions  in Â
a
utomatic  mode.
The "AUTO"
Â
symbol  switches  off.
To
 return  to  automatic  mode,  press  the  "AUTO"
button.
Manual override
4. Air conditioning on/off
For maximum cooling or heating of the c abin,  it  is  possible  to  go  beyond  the Â
m
inimum  14  or  maximum  28  values.
F
P
ress the blue button 2 until "LO"
is
 displayed  or  the  red  button  2
until
"HI"
Â
is  displayed. Press this button to switch off the air
conditioning.
Stopping
 the  air  conditioning  may  cause
 s
ome  problems  (humidity,  misting).
5. Air intake / Air recirculation
Press this button for recirculation of
the
 interior  air.  The  air  recirculation Â
s
ymbol
 5
 is  displayed.
Avoid
 prolonged  recirculation  of Â
i
nterior  air  (risk  of  condensation  or Â
d
eterioration  of  the  air  quality).
Switching
Â
to
Â
manual
Â
mode
Â
may
Â
not
Â
be
Â
s
uitable
Â
(temperature,
Â
humidity,
Â
odour,
Â
c
ondensation)
Â
and
Â
does
Â
not
Â
provide
Â
o
ptimum
 c
omfort. Automatic
Â
operation
Â
of
Â
the
Â
air
Â
conditioning
Â
is
Â
r
esumed
Â
when
Â
the
Â
button
Â
is
Â
pressed
Â
again.
Â
The
Â
symbol
Â
"A /C "
Â
is
Â
displayed. Air
Â
recirculation  enables  the  passenger Â
c
ompartment  to  be  isolated  from  exterior Â
o
dours
Â
and  smoke.
Press
Â
this
 button  again  or  press  the  "AUTO"
button
Â
to
Â
resume  automatic  management  of Â
t
he
Â
intake
 of  air.  The  air  recirculation  symbol  5
goes
Â
off.
Comfort
Page 115 of 380

11 3
The gear change requests are only carried out if  the  engine  speed  permits.
It is not necessary to release the accelerator
pedal
 during  gear  changes.
When
 braking  or  slowing  down,  the  gearbox Â
c
hanges  down  automatically  so  that  the  vehicle Â
p
icks  up  in  the  right  gear.
Under
 full  acceleration,  the  change  up  will  not Â
t
ake  place  unless  the  driver  operates  the  gear Â
s
elector  or  steering  mounted  control  paddle Â
(
unless  the  engine  is  close  to  its  maximum Â
s
peed).
Reverse
To engage reverse, the vehicle must be immobilised  with  your  foot  on  the  brake.
F
Sel
ect position R .
Stopping the vehicle
Before switching off the engine:
-  c hange  to  position  n to be in neutral,
or
-
Â
l
eave  the  vehicle  in  gear;  in  this  case  the Â
v
ehicle  cannot  be  moved.
Manual mode
F Select position M.
The  gears  engaged  appear  in Â
s
uccession  in  the  instrument  panel.
You
 can  change  mode  at  any  time  by Â
m
oving  the  gear  selector  from  A to M or
the
 other  way  round.
Never
 select  neutral  (position  n
)
 when Â
m
oving. There
 is  an  audible  signal  on Â
enga
gement
 o
f
 r
everse.For
 all  parking  situations,  you  must
apply the parking brake
Â
to  immobilise Â
t
he  vehicle.
When
 immobilising  the  vehicle  with  the Â
e
ngine  running,  you  must  put  the  gear Â
s
elector  into  the  neutral  (position  n
).
B
efore  doing  anything  under  the Â
b
onnet,  ensure  that  the  gear  selector Â
i
s  in  neutral  (position  n
)
 and  that  the Â
p
arking  brake  is  applied.
At
 low  speed,  if  reverse  gear  is  requested, Â
t
he n warning  lamp  flashes  and  the  gearbox Â
g
oes  into  neutral  automatically.
To
 engage  reverse,  put  the  gear  selector  into Â
p
osition n
, t
hen to position R.
driving
Page 120 of 380

There is a risk of damage to the gearbox:
-  i f  you  press  the  accelerator  and Â
b
rake  pedals  at  the  same  time,
-
Â
i
f  you  force  the  movement  of  the Â
s
elector  from  the  P position to
another position when the battery
is
 flat.
To
 reduce  fuel  consumption  when  at Â
a
 prolonged  standstill  with  the  engine Â
r
unning  (traffic  jam...),  put  the  selector Â
i
n the n position  and  apply  the  parking Â
b
rake.
If the selector is not in position P
,
when
Â
the
Â
driver's
Â
door
Â
is
Â
opened
Â
or
Â
a
pproximately
Â
45
Â
seconds
Â
after
Â
the
Â
i
gnition
Â
is
Â
switched
Â
off,
Â
a
Â
warning
Â
m
essage
Â
appears
Â
in
Â
the
Â
screen.
F
R
eturn the selector to position P ;
Â
t
he
Â
message
Â
disappears.
When
Â
driving
Â
on
Â
flooded
Â
roads
Â
or
Â
when
Â
c
rossing
Â
a
Â
ford,
Â
proceed
Â
at
Â
walking
Â
p
ace.
Operating fault
Manual operation
When the ignition is on, the lighting o
f  this  warning  lamp,  accompanied Â
b
y
Â
an
Â
audible  signal  and  a  message  in  the Â
m
ultifunction  screen,  indicates  a  gearbox  fault.
In
Â
this
Â
case,  the  gearbox  switches  to  back-up Â
m
ode
Â
and
Â
is  locked  in  3rd  gear.  You  may  feel Â
a
Â
substantial  knock  when  changing  from  P
to R
Â
and
Â
from  n to R .
 This  will  not  cause  any Â
d
amage
Â
to
Â
the  gearbox.
Do
Â
not
Â
exceed  60  mph  (100  km/h),  local  speed Â
r
estrictions
 p
ermitting.
Contact
Â
a
Â
CITROËN  dealer  or  a  qualified Â
w
orkshop
Â
as  soon  as  possible.
F
Sel
ect position M for sequential c
hanging o
f
Â
the
Â
four
Â
gears.
F
Â
P
ush
Â
the
Â
selector
Â
towards
Â
the
Â
+
Â
sign
Â
to
Â
c
hange
Â
up
Â
a
Â
gear.
F
Â
P
ull
Â
the
Â
selector
Â
towards
Â
the
Â
-
Â
sign
Â
to
Â
c
hange
Â
down
Â
a
Â
gear.
It
Â
is
Â
only
Â
possible
Â
to
Â
change
Â
from
Â
one
Â
gear
Â
to
Â
a
nother
Â
if
Â
the
Â
vehicle
Â
speed
Â
and
Â
engine
Â
speed
Â
p
ermit;
Â
other wise,
Â
the
Â
gearbox
Â
will
Â
operate
Â
t
emporarily
Â
in
Â
automatic
Â
mode. This
Â
symbol
Â
is
Â
displayed
Â
if
Â
a
Â
gear
Â
i
s
Â
not
Â
engaged
Â
correctly
Â
(selector
Â
b
etween
Â
two
Â
positions).
d
Â
disappears
Â
and
Â
the
Â
gears
Â
e
ngaged
Â
appear
Â
in
Â
succession
Â
in
Â
the
Â
in
strument
 pan
el.
Stopping the vehicle
Before switching off the engine, you can engage p osition P or
nÂ
to  place  the  gearbox  in  neutral.
In
 both  cases,  apply  the  parking  brake  to Â
i
mmobilise  the  vehicle.
Invalid value during manual
operation
If the engine speed is too low or too high, the gear  selected  flashes  for  a  few  seconds,  then Â
t
he  actual  gear  engaged  is  displayed.
It
 is  possible  to  change  from  position  d
(automatic)
 to  position  M  (manual)  at  any  time.
When
 the  vehicle  is  stationary  or  moving Â
v
ery  slowly,  the  gearbox  selects  gear  M1
automatically.
The
 sport  and  snow  programmes  do  not Â
o
perate  in  manual  mode.
Page 124 of 380

To reduce fuel consumption when at a prolonged  standstill  with  the  engine Â
r
unning  (traffic  jam...),  put  the  selector Â
i
n the n  position  and  apply  the  parking Â
b
rake.
If the selector is not in position P
,
when
Â
the
Â
driver's
Â
door
Â
is
Â
opened
Â
or
Â
a
pproximately
Â
45
Â
seconds
Â
after
Â
the
Â
i
gnition
Â
is
Â
switched
Â
off,
Â
a
Â
warning
Â
m
essage
Â
appears
Â
in
Â
the
Â
screen.
F
R
eturn the selector to position P
;
 t
he
Â
message
Â
disappears.
When
Â
driving
Â
on
Â
flooded
Â
roads
Â
or
Â
when
Â
c
rossing
Â
a
Â
ford,
Â
proceed
Â
at
Â
walking
Â
p
ace. There
 is  a  risk  of  damage  to  the  gearbox:
- Â
i
f  you  press  the  accelerator  and Â
b
rake  pedals  at  the  same  time,
- Â
i
f  you  force  the  movement  of  the Â
s
elector  from  the  P position to
another position when the battery
is  flat.
F
Sel
ect position M for sequential
 c
hanging
 o
f
Â
the
Â
six
Â
gears.
F
Â
M
ove
Â
the
Â
selector
Â
towards
Â
the
Â
+
Â
sign
Â
to
Â
c
hange
Â
up
Â
a
Â
gear.
F
Â
M
ove
Â
the
Â
selector
Â
towards
Â
the
Â
-
Â
sign
Â
to
Â
c
hange
Â
down
Â
a
Â
gear.
It
Â
is
Â
only
Â
possible
Â
to
Â
change
Â
from
Â
one
Â
gear
Â
to
Â
a
nother
Â
if
Â
the
Â
vehicle
Â
speed
Â
and
Â
engine
Â
speed
Â
p
ermit;
Â
other wise,
Â
the
Â
gearbox
Â
will
Â
operate
Â
t
emporarily
Â
in
Â
automatic
Â
mode.
Manual operation
d disappears and the gears e
ngaged  appear  in  succession  in  the Â
in
strument
 pan
el.
If
Â
the
Â
engine  speed  is  too  low  or  too  high,  the Â
g
ear
Â
selected  flashes  for  a  few  seconds,  then Â
t
he
Â
actual
 gear  engaged  is  displayed.
It
Â
is
Â
possible  to  change  from  position  d
(automatic)
 to  position  M  (manual)  at  any  time.
When
Â
the
 vehicle  is  stationary  or  moving Â
v
ery
Â
slowly,  the  gearbox  engages  first  gear Â
au
tomatically.
Invalid value during manual
operation
This symbol is displayed if a gear i s  not  engaged  correctly  (selector Â
b
etween  two  positions).
Stopping the vehicle
Before switching off the engine, you can engage  position  P or n to  place  the  gearbox  in Â
neu
tral.
In
 both  cases,  apply  the  parking  brake  to Â
i
mmobilise  the  vehicle. When
 the  ignition  is  on,  the  lighting Â
o
f  this  warning  lamp,  accompanied Â
Operating fault
by an audible signal and a message in the m
ultifunction  screen,  indicates  a  gearbox  fault.
In
 this  case,  the  gearbox  switches  to  back-up Â
m
ode  and  is  locked  in  3rd  gear.  You  may  feel Â
a
 substantial  knock  when  changing  from  P
to R
 and  from  n to R.
 This  will  not  cause  any Â
d
amage  to  the  gearbox.
Do
 not  exceed  60  mph  (100  km/h),  local  speed Â
r
estrictions
 p
ermitting.
Contact
 a  CITROËN  dealer  or  a  qualified Â
w
orkshop  as  soon  as  possible.
Page 161 of 380

159
Emergency braking assistance
System which, in an emergency, enables you to  obtain  the  optimum  braking  pressure  more Â
q
uickly,  thus  reducing  the  stopping  distance.
Activation
It is triggered by the speed at which the brake pedal  is  pressed.
The
 effect  of  this  is  a  reduction  in  the Â
r
esistance  of  the  pedal  and  an  increase  in Â
b
raking
 e
fficiency.
When
 braking  in  an  emergency,  press Â
f
irmly  without  releasing  the  pressure.
Trajectory control systems
Anti-slip regulation (ASR)
and dynamic stability
control (
d
SC)
The anti-slip regulation (also known as traction control)  optimises  traction  to  prevent  skidding Â
o
f  the  wheels,  by  acting  on  the  brakes  of  the Â
d
riving  wheels  and  on  the  engine.
The electronic stability control acts on the
brake
 of  one  or  more  wheels  and  on  the  engine Â
t
o  keep  the  vehicle  on  the  trajectory  required Â
b
y  the  driver,  within  the  limits  of  the  laws  of Â
p
hysics.Activation
These systems are activated automatically each  time  the  vehicle  is  started.
They
 come  into  operation  in  the  event  of  a  grip Â
o
r
 t
rajectory
 pro
blem.
This
 is  indicated  by  flashing  of  this Â
w
arning  lamp  in  the  instrument  panel.
Safety
Page 199 of 380

197
Range indicators
Once the AdBlue® tank is on reserve or after d
etection
Â
of
Â
a
Â
fault  with  the  SCR  emissions Â
c
ontrol
Â
system,
Â
when  the  ignition  is  switched Â
o
n,
Â
an
Â
indicator
Â
displays  an  estimate  of  the Â
d
istance
Â
that
Â
can
Â
be  covered,  the  range,  before Â
e
ngine
Â
starting
Â
is
Â
prevented.
In
Â
the
Â
event
Â
of
Â
simultaneous  system  fault  and Â
l
ow
Â
AdBlue
® level, the shortest range figure is t
he
Â
one
Â
displayed. The
 engine  start  prevention  system Â
r
equired  by  regulations  is  activated Â
a
utomatically  once  the  AdBlue
® tank i
s
Â
empty.
In the event of the risk of non-starting related to a lack of AdBlue®
Range greater than 1 500 miles (2 400 km)
When  the  ignition  is  switched  on,  no Â
i
nformation  on  range  is  displayed  automatically Â
i
n  the  instrument  panel.
Remaining range between 350 and 1500 miles (600 and 2 400 km)
When switching on the ignition, the UREA warning  lamp  comes  on,  accompanied Â
b
y  an  audible  signal  and  the  display  of  a Â
m
essage  (e.g.:  "Top  up  emissions  additive: Â
S
tarting  prevented  in  900  miles")  indicating Â
t
he  remaining  range  expressed  in  miles  or Â
k
ilometres.
When
 driving,  the  message  is  displayed  every Â
2
00  miles  (300  km)  until  the  additive  tank  has Â
be
en
 t
opped-up.
Go
 to  a  CITROËN  dealer  or  a  qualified Â
w
orkshop  to  have  the  AdBlue
® tank topped-up.
Y
ou
Â
can
Â
also
Â
top-up
Â
the
Â
tank
Â
yourself.
For
Â
more
Â
information
Â
on
Â
topping-up  the Â
Ad
Blue
® additive, refer to the corresponding s
ection.
Practical information
Page 200 of 380

When switching on the ignition, the SERVICE warning  lamp  comes  on  and  the  UREA  warning Â
l
amp  flashes,  accompanied  by  an  audible Â
s
ignal  and  the  display  of  a  message  (e.g.  "Top Â
u
p  emissions  additive:  Starting  prevented  in Â
3
50  miles")  indicating  the  remaining  range Â
e
xpressed  in  miles  or  kilometres.
When
 driving,  the  message  is  displayed  every Â
3
0  seconds  until  the  additive  tank  has  been Â
t
opped-up.
Go
 to  a  CITROËN  dealer  or  a  qualified Â
w
orkshop  to  have  the  AdBlue
® tank topped-up.
Y
ou
Â
can
Â
also
Â
top-up
Â
the
Â
tank
Â
yourself.
Other wise you will not be able to restart your
engine.
Remaining range between 0 and 350 miles (0 and 600 km)
When switching on the ignition, the SERVICE w arning  lamp  comes  on  and  the  UREA  warning Â
l
amp  flashes,  accompanied  by  an  audible Â
s
ignal  and  the  display  of  the  message  "Top  up Â
e
missions  additive:  Starting  prevented".
The
 Ad
Blue
® tank is  empty:  t he  s ystem  r equired  b
y
Â
regulations  prevents  engine  starting.
Breakdown related to a lack of AdBlue® additive
To be able to start the engine, w
e  recommend  that  you  call  on Â
a
 CITROËN  dealer  or  a  qualified Â
w
orkshop  for  the  top-up  required.
If
 you  carry  out  the  top-up  yourself,  it Â
i
s  essential  to  add  at  least  3.8  litres  of Â
Ad
Blue
® to the tank.
F
or
Â
more
Â
information
Â
on
Â
topping-up
Â
the
Â
Ad
Blue
® additive, refer to the corresponding s
ection.