buttons Citroen DS4 RHD 2013.5 1.G Owner's Manual

Customisable colour instrument panel - Type 1



1.
Rev counter (x 1 000 rpm or tr/min).

2.
Gear efficiency indicator or gear lever
position and gear engaged (electronic or
automatic gearbox).

3.
Analogue speedometer (mph or km/h).

4.
Cruise control or speed limiter setting.

5.
Digital speedometer (mph or km/h).

6.
Engine oil level indicator.


Dials and screens
Control buttons


7.
Ser vice indicator
(miles or km) then,
total mileage recorder.
These two functions are displayed
successively on switching on the ignition.
Lighting dimmer setting (when making an
adjustment).

8.
Trip mileage recorder (miles or km).

9.
Fuel gauge and associated low fuel
warning lamp.

10.
Range (miles or km).


A.
Dial COLOUR: customisation of the
background colour of the dials.

B.
Screen COLOUR: customisation of the
background colour of the screens.

C.
Lighting dimmer (available in night mode).

D.
Reminder of the servicing information
Reset the service indicator or the trip
mileage recorder.

39Monitoring


1.
Rev counter (x 1 000 rpm or tr/min).

2.
Gear efficiency indicator or gear lever
position and gear for an electronic or
automatic gearbox.

3.
Speedometer (mph or km/h).

4.
Central screen.

5.
Fuel gauge and associated low fuel level
warning lamp.

Dials and screens


6.
Trip mileage recorder (miles or km).

7.
Ser vice spanner (if a ser vice is due or
missed),
total mileage recorder.
(miles or km)



Control buttons




















Customisable colour instrument panel - Type 2



A.
Dial COLOUR: customisation of the
background colour of the dials.

B.
Screen COLOUR: customisation of the
background colour of the screens.

C.
Dashboard lighting dimmer (in night mode).

D.
Start a manual test (procedure for checking
the status of systems and display of vehicle
alerts).
Reset service indicator or trip mileage
recorder.

Monochrome screen C

This displays the following information:


- time,

- date,

- ambient temperature (this flashes if there is
a risk of ice),

- parking sensor information,

- parking space measurement,

- current audio source,

- telephone or Bluetooth system information,

- trip computer (refer to the end of the
section),

- alert messages,

- settings menus for the screen and the
vehicle equipment.



Displays in the screen

From the control panel of your audio system,
you can press:



button A
to chooses between the display
of audio information in full screen or the
shared display of audio and trip computer
information,


the "MENU"
button for access to the main
menu
,


the " 
" or " 
" buttons to scroll through the
items on the screen,


the " 
" or " 
" buttons to change a setting
value,


the "OK"
button to confirm,
or



the "Back"
button to abandon the
operation in progress.



Controls




Press the "MENU"
button for access to the
main menu
:


- "Multimedia",

- "Telephone",

- "Trip computer",

- "Bluetooth connection",

- "Personalisation-configuration",


Press the " 
" or " 
" button to select the
menu required, then confirm by pressing
the "OK"
button.



Main menu

Defi ne the vehicle parameters



- "Driving assistance":


●
"Parking brake automatic" (Automatic
electric parking brake; see the "Driving"
section),

●
"Rear wipe in reverse gear" (Rear
wiper coupled to reverse gear; see the
" Visibility" section),

●
"Speeds memorised" (Memorising
speeds; see the "Driving" section).



- " Vehicle lighting" (see the " Visibility"
section):


●
"Directional headlamps" (Main /
additional directional lighting),

●
"Daytime lights" (Daytime running
lamps).



- "Interior lighting" (see the " Visibility"
section:


●
"Follow-me-home headlamps"
(Automatic operation of headlamps after
switching off the ignition),

●
" Welcome lighting" (Exterior and interior
welcome lighting).
For example: setting of the duration of the
"follow-me-home" lighting



Press the " 
" or " 
" buttons, to select the
"Define the vehicle parameters" menu,
then the " OK
" button.


Press the " 
" or " 
" buttons to select the
"Interior lighting" line, then the "OK"
button;
then follow the same procedure to select the
"Follow-me-home headlamps" line. This menu allows you to activate or deactivate
the following equipment, classified in different
categories:


- "Access to the vehicle" (see the "Access"
section):


●
"Plip action" (Selective unlocking of the
driver's door),

●
"Unlocking boot only" (Selective
unlocking of the boot).



"Personalisation-
configuration" menu
This menu gives access to the following
functions:


- "Define the vehicle parameters",

- "Choice of language",

- "Display configuration",

- "Choice of sounds".

67Multifunction screens


Press the " 
" or " 
" buttons to set the
value required (15, 30 or 60 seconds), then
press the "OK"
button to confirm.


Choice of language

Once this menu has been selected, you can
choose the language used by the display from
a pre-defined list.


Display confi guration

This menu gives access to the following
settings:


- "Choice of units",

- "Date and time adjustment",

- "Display parameters",

- "Brightness".


Choice of sounds

This menu allows you to choose a family of
polyphonic sounds from the four available.
These sounds are grouped together in a family
and are adapted to suit the situation and
context (alert, confirmation, rejection, direction
indicators, lighting left on, key in ignition...).

For safety reasons, configuration of the
multifunction screen by the driver must
only be done when stationary.

Press the " 
" or " 
" buttons, then
the "OK"
button to select the "OK"
box
and confirm or press the "Back"
button to
cancel.

Adjusting the date and time




Press the " 
" or " 
" button to display
the "Display configuration" menu, then
press "OK"
.


Press the " 
" or " 
" button to select the
"Date and time adjustment" button, then
press "OK"
.


Press the " 
" or " 
" button to select
the setting to modify. Confirm by
pressing "OK"
, then modify the setting and
confirm again to save the modification.


Adjust the settings one by one, confirming
with the "OK"
button.


Press the " 
" or " 
" button, then the "OK"

button to select the "OK"
box and confirm
or the "Back"
button to cancel.

5. Air conditioning On / Off




Press this button to switch off
the air conditioning.
Switching the system off could result in
discomfort (humidity, condensation).



Press this button again to return to
automatic operation of the air conditioning.
The indicator lamp on the "A /C "
button
comes on.



6. Air distribution adjustment




Press one or more buttons to
direct the air flow towards:


- the windscreen and side windows
(demisting or defrosting),

- the outer and centre air vents,

- the footwells.

You can combine the three orientations to
obtain the desired air distribution.


7. Air fl ow adjustment




Turn this control to the left to
decrease the air flow or to the
right to increase the air flow.


8. Air intake / Air recirculation




Press this button for
recirculation of the interior
air. The indicator lamp in the
button comes on. The air flow indicator lamps, between the two
fans, come on progressively in relation to the
value requested.


9. "REST" function: ventilation
with the engine off
Even with the engine is off, you can
operate the ventilation for a few
minutes.
Air recirculation enables the passenger
compartment to be isolated from exterior
odours and smoke.



As soon as possible, press this button
again to permit the intake of outside air and
prevent the formation of condensation. The
indicator lamp in the button goes off.
For example, while you are away from the
vehicle, the passengers can still enjoy some air
circulation without having the engine running.
This function is available after switching on the
ignition, as well as after stopping the engine.
The period that the function is available
depends on the state of charge of the battery.
You can activate the "REST" function while the
air conditioning control screens are on.

Avoid prolonged operation in interior air
recirculation mode (risk of misting and
deterioration of air quality).

107Access








Do not throw the remote control
batteries away, they contain metals
which are harmful to the environment.
Take them to an approved collection
point.













Lost keys

Go to a CITROËN dealer with the vehicle's registration document, your personal
identification documents and if possible the key code label.
The CITROËN dealer will be able to look up the key code and the transponder code
required to order a new key.


Remote control

The high frequency remote control is a sensitive system; do not operate it while it is in your
pocket as there is a possibility that it may unlock the vehicle, without you being aware of it.
Do not repeatedly press the buttons of your remote control out of range and out of sight of
your vehicle. You run the risk of stopping it from working and the remote control would have
to be reinitialised.
No remote control can operate when the key is in the ignition switch, even when the ignition
is switched off, except for reinitialisation.


Locking the vehicle

Driving with the doors locked may make access to the passenger compartment by the
emergency ser vices more difficult in an emergency.
As a safety precaution, never leave children alone in the vehicle, except for a very short
period.
In all cases, it is essential to remove the key from the ignition switch when leaving the vehicle.


Anti-theft protection

Do not make any modifications to the electronic engine immobiliser system; this could
cause malfunctions.


When purchasing a second-hand vehicle

Have the pairing of all of the keys in your possession checked by a CITROËN dealer, to
ensure that only your keys can be used to open and start the vehicle.


Turn dial 1
to the "LIMIT"
position: the
speed limiter mode is selected but is not
switched on (Pause).
You do not have to switch the speed limiter on
in order to set the speed.



Set the speed value by pressing button 2

or 3
(e.g.: 55 mph (90 km/h)).


Programming

You can then change the programmed speed using buttons 2
and 3
:


- by + or - 1 mph (km/h) = short press,

- in steps of + or - 5 mph (km/h) = maintained press.
If speed memorisation is available and activated on your vehicle, the
programmed speed will stop at the closest memorised speed; refer to the
corresponding paragraph.



Switch the speed limiter on by pressing button 4
.


Switch the speed limiter off by pressing button 4
: the display
confirms that it has been switched off (Pause).


Switch the speed limiter back on by pressing button 4
again.



Exceeding the programmed speed

Pressing the accelerator pedal to exceed the programmed speed will not have
any effect unless you press the pedal firmly
past the point of resistance
.
The speed limiter is deactivated temporarily and the programmed speed,
which is still displayed, flashes.
Returning to the programmed speed, by means of intentional or unintentional
deceleration of the vehicle, automatically cancels the flashing of the
programmed speed. On a steep descent or in the event of
sharp acceleration, the speed limiter
will not be able to prevent the vehicle
from exceeding the programmed
speed.
To avoid any risk of jamming of the
pedals:


- ensure that the mat is positioned
correctly,

- do not fit one mat on top of another.



Exiting the speed limiter mode




Turn dial 1
to the "0"
position: the speed
limiter mode is deselected. It disappears
from the screen.



Operating fault

In the event of a fault with the speed limiter,
the speed is cleared resulting in flashing of the
dashes.
Have it checked by a CITROËN dealer or a
qualified workshop.

Programming




Turn dial 1
to the "CRUISE"
position: the
cruise control mode is selected but is not
switched on (Pause).


Set the programmed speed by accelerating
to the required speed, then press button 2
or 3
(e.g.: 70 mph (110 km/h)); the cruise
control system is activated (ON).
You can then change the programmed speed using buttons 2
and 3
:


- by + or - 1 mph (km/h) = short press,

- in steps of + or - 5 mph (km/h) = maintained press.
If storing speeds is available and activated on your vehicle, the
programmed speed will stop at the closest stored speed; refer to the
corresponding section.



Stop the cruise control system by pressing button 4
: this is
confirmed in the screen (Pause).


Switch on the cruise control again with another press on button 4
.



Exceeding the programmed speed

Intentional or unintentional exceeding of the programmed speed results in
flashing of this speed in the screen.
Return to the programmed speed, by means of intentional or unintentional
deceleration of the vehicle, automatically cancels the flashing of the speed.


Exiting cruise control mode




Turn dial 1
to the "0"
position: the cruise control mode is deselected.
It disappears from the screen.



Operating fault

In the event of a cruise control malfunction,
the speed is cleared resulting in flashing of the
dashes.
Have it checked by a CITROËN dealer or a
qualified workshop.
When the cruise control is switched on,
be careful if you maintain the pressure
on one of the programmed speed changing
buttons: this may result in a very rapid
change in the speed of your vehicle.
Do not use the cruise control on slippery
roads or in heavy traffic.
On a steep descent, the cruise control will
not be able to prevent the vehicle from
exceeding the programmed speed.
On steep climbs or when towing, the
programmed speed may not be reached or
maintained.
To avoid any risk of jamming of the pedals:


- ensure that the mat is positioned
correctly,

- never fit one mat on top of another.

07
335

Press the button on the numerical
keypad to recall a preset station.
Or press then turn the thumb wheel at
the steering mounted controls.



Presetting a station


After selecting a station, press one of
the buttons on the numerical keypad for
2 seconds to preset the current station.
An audible signal confi rms that the
station has been preset.
Press RADIO
.







Activate / Deactivate RDS


RDS, if activated, allows you to continue listening to the same
station by automatic retuning to alternative frequencies. However,
in certain conditions, coverage of an RDS station may not be
assured throughout the entire country as radio stations do not
cover 100 % of the territory. This explains the loss of reception
of the station during a journey.

Select " Guidance options
" then
confi rm.

Activate or deactivate " RDS
" then
confi rm.


RADIO