height Citroen DS4 RHD 2013.5 1.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2013.5, Model line: DS4 RHD, Model: Citroen DS4 RHD 2013.5 1.GPages: 400, PDF Size: 31.86 MB
Page 16 of 400
Instruments and controls
1.
Controls for audio and telematic system.
2.
Controls for Bluetooth system or telephone.
3.
Steering lock and ignition.
4.
Wiper / screenwash / trip computer control
stalk.
5.
Instrument panel.
6.
Driver's airbag.
Horn.
7.
Cruise control / speed limiter controls.
8.
Controls for optional functions.
9.
Door mirror controls.
Electric window controls.
10.
Storage compartment.
11.
Manual headlamp height adjustment
Lower side switch panel.
12 .
Fuel filler flap opening switch.
Upper side switch panel.
13.
Side adjustable air vent.
14 .
Front side window demisting vent.
Page 19 of 400
17Familiarisation
Sitting comfortably
Manual adjustment
88
Driver's seat
Forwards-backwards
Height
Electric adjustment
Seat back angle
89
Page 20 of 400
Sitting comfortably
Head restraint height and angle
Front seats
Other functions available...
Lumbar massage.
Heated seats.
90
1.
Releasing the adjustment mechanism.
2.
Adjustment for height and reach.
3.
Locking the adjustment mechanism.
Steering wheel adjustment
93
As a safety precaution, these
operations must only be carried out
when stationary.
Lumbar
91
Page 21 of 400
19Familiarisation
For your comfort, the front armrest can be
adjusted for longitudinal position and for height,
depending on version.
Front armrest
14 9, 15 0
It also has a storage compartment.
Sitting comfortably
Page 22 of 400
Sitting comfortably
Door mirrors
Adjustment
A.
Selection of the mirror to be adjusted.
B.
Adjustment of the position of the mirror in
the four directions.
C.
De-selection of the mirror.
94
Other functions available...
Folding / Unfolding.
Automatic tilting of the mirror in reverse
gear for parking.
Blind spot sensors.
Rear view mirror
Manual day/night model
1.
Selection of the "day" position of the mirror.
2.
Adjustment of the mirror.
Automatic day/night model
96
A.
Brightness detection in automatic day/night
mode.
B.
Adjustment of the mirror.
1.
Fastening the buckle.
2.
Height adjustment.
Front seat belts
181
Page 90 of 400
Front seats
Seat consisting of a seat cushion, a seat back and a head restraint which can all be adjusted to
adapt your position for ease of driving and comfort.
Manual adjustments
Forwards-backwards
Raise the control and slide the seat
for wards or backwards.
Driver's or passenger's seat
height
Pull the control upwards to raise or push
it downwards to lower, as many times as
necessary, to obtain the position required.
Seat backrest angle
Turn the control knob to adjust the seat
backrest angle.
As a safety measure, seat adjustments
should only be done when stationary.
Page 91 of 400
89Comfort
Front seats
Seat consisting of a seat cushion, a seat backrest and a head restraint which can all be adjusted to
adapt your position for ease of driving and comfort.
Driver's seat electric adjustments
Forwards-backwards
Push the control for wards or rear wards to
slide the seat.
Cushion height and angle
Tilt the rear part of the control upwards or
downwards to obtain the required height.
Tilt the front part of the control upwards or
downwards to obtain the required angle.
Seat backrest angle
Tilt the control for wards or rear wards to
adjust the angle of the seat backrest.
The electrical functions of the driver's seat
are deactivated approximately one minute
after the ignition is switched off.
To reactivate them, switch on the ignition.
Page 92 of 400
Heated seats control
With the engine running, the front seats can be
heated separately.
Use the adjustment dial, placed on the side
of each front seat, to switch on and select
the level of heating required:
0:
Off.
1
:
Low.
2
:
Medium.
3
:
High.
Additional adjustments
Head restraint height and angle
To raise a head restraint, pull it upwards.
To lower the head restraint, press the lug A
and the head restraint at the same time.
To adjust the angle of the head restraint, tilt
its lower part for wards or rear wards.
The head restraint is fitted with a frame
with notches which prevents it from
lowering; this is a safety device in case
of impact.
The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.
Removing a head restraint
To remove the head restraint, press the
lug A
and pull the head restraint upwards.
To put the head restraint back in place,
engage the head restraint stems in the
openings keeping them in line with the seat
back and press the lug A
at the same time.
Never drive with the head restraints
removed; they must be in place and
adjusted correctly.
Page 95 of 400
93Comfort
These have one position for use (up) and a
stowed position (down).
They can also be removed.
To remove a head restraint:
release the backrest using control 1
,
tilt the backrest 2
slightly forwards,
pull the head restraint upwards to the stop,
then, press the lug A
.
Rear head restraints
Never drive with the head restraints
removed; they must be in place and
correctly adjusted.
Steering wheel adjustment
When stationary
, pull the control lever to
release the adjustment mechanism.
Adjust the height and reach to suit your
driving position.
Push the control lever to lock the
adjustment mechanism.
As a safety precaution, these
operations should only be carried out
while the vehicle is stationary.
Page 132 of 400
Automatic adjustment of xenon headlamps
Do not touch the xenon bulbs.
Contact a CITROËN dealer or a
qualified workshop. This system adjusts the height of the xenon
headlamp beams automatically and when
stationary, according to the load in the vehicle, so
as to avoid causing a nuisance to other road user.
If a malfunction occurs, this
warning lamp is displayed in the
instrument panel, accompanied by
an audible signal and a message in the screen.
The system then places your headlamps in the
lowest position.
Manual adjustment
of halogen
headlamps
To avoid causing a nuisance to other road
users, the height of the halogen headlamps
should be adjusted according to the load in the
vehicle.
0.
1 or 2 people in the front seats.
-.
3 people.
1.
5 people.
-.
Intermediate setting.
2.
5 people + maximum authorised load.
-.
Intermediate setting.
3.
Driver + maximum authorised load.
The initial setting is position "0"
.