windscreen Citroen DS5 2016 1.G User Guide

DS5_en_Chap08_info-pratiques_ed02-2015
Changing a wiper blade
Before removing a front
wiper blade
F Within one minute after switching off
the ignition, operate the wiper stalk to
position the wiper blades vertically on the
windscreen.
Removing
F Raise the corresponding wiper arm.
F Un clip the wiper blade and remove it.
Fitting
F Put the corresponding new wiper blade in
place and clip it.
F
Fo

ld down the wiper arm carefully.
After fitting a front wiper
blade
F Switch on the ignition.
F Op erate the wiper stalk again to park the
wiper blades.

DS5_en_Chap10_caracteristiques_ed02-2015
Identification markingsVarious visible markings for the identification of your vehicle.
A.
veh

icle Identification Number (
vIN
)
under the bonnet.
Th

is number is engraved on the bodywork
near the damper support. The tyre pressures must be checked
when the tyres are cold, at least once
a month.
If the tyre pressures are too low, this
increases fuel consumption.
B.
veh

icle identification Number (
vIN
) on
the windscreen lower cross member.
Th

is number is indicated on a self-adhesive
label which is visible through the windscreen.
c. Ma

nufacturer's label.
Th

e VIN is indicated on a self-destroying
label affixed to the door aperture, on the
passenger's side.
d. Tyr

e/paint label.
Th

is label is affixed to the centre pillar, on
the driver's side. It bears the following information:
-
th

e tyre inflation pressures, laden and
unladen,
-
th

e tyre sizes,
-
th

e inflation pressure of the spare wheel,
-
th

e paint colour code.
The rear quarter light cannot be etched
as it is made of polycarbonate material.