stop start Citroen DS5 HYBRID4 2014 1.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2014, Model line: DS5 HYBRID4, Model: Citroen DS5 HYBRID4 2014 1.GPages: 380, PDF Size: 13.62 MB
Page 10 of 380

DS5-HYBRID_EN_CHAP00B_PRISE EN MAIN_ED02-2013
         Presentation of the Hybrid4 system  
  Thank you for choosing a DS5 Hybrid4; this vehicle has characteristics that are different from conventional vehicles.  Study this handbook to learn about the specific hybrid functions and for more information, refer to the "Hybrid system" section.   
1.   Diesel HDi engine (front wheel drive). 2.   Electric motor (rear wheel drive). 3.   200 V battery. 4.   Electronic power supervisor. 
5.   Alternator-starter motor (Stop & Start). 6.   Electronic  gearbox. 7.   Electrical  flow. 8.   Hybrid4  mode  selector.    
26
The Hybrid4 technology allows two sources of energy to be associated in an effective manner: the Diesel HDi engine, which drives the front wheels and the electric motor, which drives the rear wheels.  These two motors can operate alternately or simultaneously, according to the hybrid mode selected and the driving conditions.  The electric motor alone provides power for the vehicle in "ZEV " (Zero Emissions Vehicle) mode, and in "Auto" mode for running at slow speed and low load. It also assists the Diesel engine when moving off, accelerating and changing gear.  The battery that powers the electric motor is recharged during phases of deceleration and stores the energy for subsequent use.   
Page 16 of 380

DS5-HYBRID_EN_CHAP00B_PRISE EN MAIN_ED02-2013
 Illumination of the indicator lamp indicates the state of the corresponding function. 
  Switch  panels 
  Opening the fuel filler flap.  
  Opening  the  boot.  
  Deactivation  of  the  alarm.  
  Electric  parking  brake  activated.  
  Push  button  starting/stopping.  
  Forced operation of the Diesel engine.  
  Deactivation  of  parking  sensors.  
  Electric  child  lock.   
  Deactivation of the DSC/ASR systems.  
  Activation for Automatic headlamp 
dipping.  
  Activation of lane departure warning system.  
  Locking/unlocking  the  passenger compartment.  
101
94
93
132
31, 35
46
155
193
200
165
14 6
91 
Page 18 of 380

DS5-HYBRID_EN_CHAP00B_PRISE EN MAIN_ED02-2013
14 .   Controls for electric windows / electric child lock / central locking. 15.   eMyWay  controls. 16.   Gear  selector. 17.   Hybrid4 mode selector. 
18.   Heating / air conditioning controls. 19.   Audio  system. 20.   Hazard warning lamps. 21.   Multifunction  screen. 22.   Central adjustable air vents. 23.   Clock. 24.   Starting with the START/STOP button. 25.   Electronic key reader. 26.   Wiper / screenwash / trip computer stalk. 
      
Instruments and controls 
1.   Bonnet release lever. 2.   Headlamp height adjustment. 3.   Side adjustable air vents. 4.   Front door window demisting/defrosting vents. 
5.   Quarter light demisting windows. 6.   Head-up  display. 7.   Windscreen demisting/defrosting vent. 8.   Passenger's  airbag. 9.   Glove box / Passenger's airbag deactivation inside. 10.   12 V accessory socket. 11.   Rear electric window controls. 12 .   Central armrest with storage.    USB port / auxiliary socket. 13.   Electric parking brake. 
2 7.   Audio equipment steering mounted controls. 28.   Driver's  airbag.     Horn. 29.   Cruise control / speed limiter controls. 
30.   Switch panel (see previous page). 31.   Door mirror adjustment. 32.   Lighting and direction indicator stalk 33.   Instrument  panel. 34.   Seat belt and airbag warning lamps. 35.   Courtesy  lamp. 36.   Head-up display controls. 3 7.   Controls for cockpit glass roof blind. 38.   CITROËN Localised Emergency Call - CITROËN Localised Assistance Call.   
Page 25 of 380

23Familiarisation
DS5-HYBRID_EN_CHAP00B_PRISE EN MAIN_ED02-2013
  Starting - stopping the engine 
 Driving  safely 
  Before  starting   Starting 
    -   The  instrument  panel  and  the   Ready   lamp come on, confirmed by an audible signal.   -   The dial in the centre console is in AUTO  mode.    
   -   Place the gear selector in position  N .   -   Insert the electronic key in the reader or keep the electronic key inside the vehicle.   
   -   Press  the  brake  pedal.   -   Make single short press (about 1 second) on the  START/STOP   button.   
  Moving  off 
    -   While  maintaining  pressure  on  the  brake pedal, move the gear selector to position  Ato go for wards or  R  for reverse.   -   Take your foot off the brake pedal, you can then  move  off.    
31 
Page 30 of 380

DS5-HYBRID_EN_CHAP00C_HYBRIDE_ED02-2013
         Presentation 
The Hybrid4 technology allows two sources of energy to be associated in an effective manner: the Diesel HDi engine, which drives the front wheels and the electric motor, which drives the rear wheels.  These two motors can operate alternately or simultaneously, according to the hybrid mode selected and the driving conditions.  The electric motor alone provides power for the vehicle in "ZEV " (Zero Emissions Vehicle) mode, and in "Auto" mode for running at slow speed and low load. It also assists the Diesel engine when moving off, accelerating and changing gear.  The battery that powers the electric motor is recharged during phases of deceleration and stores the energy for subsequent use.  
1.   Diesel HDi engine (front wheel drive). 2.   Electric motor (rear wheel drive). 3.   200 V battery. 4.   Electronic power supervisor. 
5.   Alternator-starter motor (Stop & Start). 6.   Electronic  gearbox. 7.   Electrical  flow. 8.   Hybrid4  mode  selector.     
Page 31 of 380

29Hybrid system
DS5-HYBRID_EN_CHAP00C_HYBRIDE_ED02-2013
Main parts of the Hybrid4 system 
  The   HDi Diesel engine - 1 , located at the front, drives the front wheels and provides most of the power needed to drive the vehicle.  It is fitted with an  alternator-starter motor( Stop & Star t )   Stop & Star t )   Stop & Star t- 5  which recharges the batteries and provides additional power when needed (in 4x4 mode).  
  The   electric motor - 2 , located at the rear, drives the rear wheels on its own, or supplements the Diesel engine, according to the hybrid mode selected.  It recovers energy and charges the batteries during phases of deceleration of the vehicle and is active up to 70 mph (120 km/h).  
  A 200 V NI-MH  high voltage batter y - 3 , provides a source of energy for the rear electric motor.  Its charging rate is managed automatically by the vehicle during phases of deceleration.  It is located in a compartment in the boot, access to which is restricted to trained service technicians.  
  The  battery   state of charge  is indicated by 8 horizontal or vertical bars (depending on the screen).  
  The   conventional battery , located under the conventional battery , located under the conventional batterybonnet, powers the vehicle's 12 V systems. It is recharged automatically by the high voltage network.   
Page 32 of 380

DS5-HYBRID_EN_CHAP00C_HYBRIDE_ED02-2013
  The   electronic power super visor - 4automatically manages the operation of the two power units (Diesel and electric) to provide the lowest consumption.  An inverter and a transformer are needed to manage the electric power.  The inverter acts on the torque of the electric motor, by regulating the current coming from the high voltage battery pack. Its operating range is between 150 and 270 volts.  The transformer converts the 200 V of the battery pack to 12 V, to power the vehicle's ancillary  systems.  
  The   alternator-starter motor - 5   assures the  Stop & Star t  function which allows the Diesel engine to be put into standby during stops (traffic lights, a stop, or in a traffic jam, for example) or during phases of running in all-electric mode.  The stopping and restarting of the Diesel engine is done in a way that is instantaneous and transparent for the driver.  It also provides additional charging of the batteries (4x4 mode for example or under-charged high voltage battery).  
  The   electronic gearbox - 6  provides, in automatic mode, significant savings in fuel consumption compared to a conventional manual gearbox, thanks to its electronic control system.  It also offers improved driving pleasure with the possibility at any time of choosing the gear changing mode: automatic or manual, using the paddles located behind the steering wheel.    
Page 33 of 380

31Hybrid system
DS5-HYBRID_EN_CHAP00C_HYBRIDE_ED02-2013
  Before  starting 
    -   Place the gear selector lever in position  N .   -   If your vehicle has Keyless Entry and Starting, simply having the key inside the vehicle is sufficient.   -   If not, place the electronic key in the reader.    
    -   Press  the  brake  pedal.   -   Make a single short press (about a second) on the  START/STOP   button.   -   The steering column locks (noticeable noise and movement of the steering wheel).   -   Keep your foot on the brake pedal until the Hybrid4 system starts up (the instrument panel and the  Ready  lamp come on, confirmed by an audible signal).  
  Starting the Hybrid4 system 
               Starting - switching off the engine 
 The hybrid system determines whether it is necessary to start the Diesel engine.   
When your vehicle vehicle moves off 
in electric mode, it makes no noise. Be ver y careful of pedestrians and cyclists as they will not hear you coming. 
Page 34 of 380

DS5-HYBRID_EN_CHAP00C_HYBRIDE_ED02-2013
  Switching off the Hybrid4 
system 
    -   Before  switching  off  the  Hybrid4  system, place the gear selector in position  N .   -   Make a short press on the  START/STOPbutton.   -   The system shuts down and the steering column  locks.     For more information, see the section on "Underbonnet precautions/warnings".  
  When stationary, switch off the ignition and check that the  Ready  lamp is off before leaving the vehicle, otherwise the hybrid system will still be active.   
Page 35 of 380

33Hybrid system
DS5-HYBRID_EN_CHAP00C_HYBRIDE_ED02-2013
            Anti-theft  protection  
  Electronic  engine  immobiliser 
 The keys contain an electronic chip which has a secret code. When the ignition is switched 
on, this code must be recognised in order for starting to be possible.  This electronic engine immobiliser locks the engine management system a few minutes after the ignition is switched off and prevents starting of the engine by anyone who does not have the key.  In the event of a malfunction, you are informed by a message in the instrument panel screen.  In this case, your vehicle does not start; contact a CITROËN dealer as soon as possible.   
               Ignition on without 
starting  
  With the electronic key in the reader or the Keyless Entry and Starting key inside the vehicle, pressing the "START/STOP" button, with no action on the pedals , allows the ignition to be switched on.  
   Press the "START/STOP" button, the instrument panel comes on but the engine does not start.    Press the button again to switch off the ignition and so allow the vehicle to be locked.   
  With the ignition on, the system goes into energy economy mode when necessary to maintain the state of charge of the battery.