wipers CITROEN E-MEHARI 2022 Owners Manual

2
.
.
Driving recommendations 50
Driving your E-MEHARI 5 0
Starting/Switching off the vehicle

5
1Maintaining and servicing your E-MEHARI
5

7
Washing precautions
5
7
Charging socket panel (access to the charging socket)
5
8
Charging your E-MEHARI
5
8
Under the bonnet
6
4
Hibernation mode
6
6
Audio system
6
7
Temporary puncture repair kit
6
9
Replacing a bulb
6
9
Replacing a fuse
7
0
Identification markings/VIN
7
2
Technical characteristics
7
2
Dimensions/ Weights

73
Tyres/Tyre pressures
7
4
Performance

75
Brakes and suspension
7
6
Braking system
7
6
Instrument panel

7
I

nstruments and indicators

on your E-MEHARI

8
R

FID personal key ring

1

0
Central locking

1

0
D o o r s


11
Boot floor hatch

1

2
Soft Top

1

2
Front windows

1

5
Rear quarter panels
1

6
Rear screen

1

6
Boot flap

1

7
Hard Top

1

8
Removing a

roof panel

1

8
Front windows

1

9
Rear quarter panels
1

9
Rear screen

2

0
Boot flap and rear screen

2

0
Adjusting the driver's seat
and the passenger's seat
2

2 Exterior lighting and signalling
3

1
Wipers/Screenwash
33
G
eneral safety recommendations
3
4
High voltage safety
3
5
Anti-theft protection/Electronic immobiliser
3
6
Assistance call
3
6
ABS – ESP
3
6
Seat belts
3
7
Airbags

39
Child seats
4
2
Deactivating the passenger's front airbag
4
3
ISOFIX mountings (child seats)
4
7
Installation of a child seat compatible with the ISOFIX standard
4
7
Visual indicators
4
8
Horns and audible warnings
4
9
Over view
Dashboard instruments
Access
Ease of use and comfort Safety
Driving Practical information
In the event of a
breakdown
Technical data
Alphabetical index
Lighting and visibility
Instruments and controls 3
P resentation of your E-MEHARI 3F
ront head restraints
2
3
Access to the rear seats
2
3
Folding rear bench seat 2 4
Steering wheel (adjustment) 2 4
Mirrors

2
5
Ventilation/Heating
2

6
Air conditioning (optional)

2
8
Interior lighting
2

9
Interior fittings

3
0Control pedals

5
2
Manual parking brake
5
3
Drive selector 5 4
Electric power steering system 5 4
Tyre under-inflation detection

5
5
Contents

3
Instruments and controls(1)RFID reader.
(2) Lighting/Direction indicator control stalk.
(3) Horn.
(4) Starting switch.
(5) Wiper/Screenwash/Pedestrian horn.
(6) Instrument panel.
(7) Vents.
(8) Central storage compartment.
(9) USB socket.
(10) Central control panel: assistance call/
central locking/hazard warning lamps/air
conditioning/automatic air recirculation.
(11) Side control panel: foglamps/City power
steering function/headlamp beam height
adjustment.
(12) Heating system.
(13) 12
V accessory socket.
(14) Driving mode selector.Presentation of your
E-MEHARI
An elegant design
combined with the latest
technology
Your E-MEHARI is an innovative electric
vehicle with a
new approach to mobility. Some
of the vehicle's systems operate differently from
those on a


conventional internal combustion
engine vehicle.
Your E-MEHARI uses energy stored in an
LMP
® (Lithium Metal Polymer) battery. The
LMP® battery has to be charged before you
can drive your E-MEHARI. The LMP® battery
progressively discharges during use of the
vehicle.
If the state of charge of the LMP
® battery is at
0%, your E-MEHARI cannot be started: the
LMP
® battery must be charged.
A full recharge (from 0% to 100%) on a normal
domestic power supply (standard charge) takes
between 8
and 13 hours on average depending
on the electrical system you have installed.
Your E-MEHARI uses two different types of
battery: the LMP
® battery to drive the vehicle
and a

12

V battery, as on a conventional
vehicle with an internal combustion engine.
The 12

V battery provides the energy needed
for operation of the vehicle's systems: e.g. the
audio system, the exterior and interior lighting,
the windscreen wipers.
.
Over view

33
Adjusting the headlamps
The headlamp beam height on your E-MEHARI
should be adjusted according to the load and
number of passengers in your vehicle, so as to
avoid causing a nuisance to other drivers.
Your E-MEHARI has a
thumbwheel for
adjusting the height of the beams.
Select the desired position using the headlamp
beam height adjustment control.
Use position "0" when driving without heavy
loads.
Wipers/Screenwash
Your E-MEHARI has two windscreen wipers.
To activate the wipers: turn the ring on the
control stalk located on the right behind the
steering wheel.
3
positions for the control:
-

P
osition 1: intermittent wipe.
-

P
osition 2: continuous wipe.
-

P
osition 3: fast continuous wipe.
Pushing the control stalk down gives a
single
wipe.
Operation of the screenwash: pull the wiper
control stalk towards you.
This action automatically operates the
windscreen wipers and the screenwash. In low temperatures, use a
screenwash
fluid with adequate protection against
freezing.
Do not operate the screenwash for more
than 30
seconds, as this could lead to
a
loss of visibility and cause an accident.
Do not operate the screenwash control
when the fluid reservoir is empty.
4
Lighting and visibility