height CITROEN E-MEHARI 2023 Owners Manual

3
Instruments and controls(1)RFID reader.
(2) Lighting/Direction indicator control stalk.
(3) Horn.
(4) Starting switch.
(5) Wiper/Screenwash/Pedestrian horn.
(6) Instrument panel.
(7) Vents.
(8) Central storage compartment.
(9) USB socket.
(10) Central control panel: assistance call/
central locking/hazard warning lamps/air
conditioning/automatic air recirculation.
(11) Side control panel: foglamps/City power
steering function/headlamp beam height
adjustment.
(12) Heating system.
(13) 12
V accessory socket.
(14) Driving mode selector.Presentation of your
E-MEHARI
An elegant design
combined with the latest
technology
Your E-MEHARI is an innovative electric
vehicle with a
new approach to mobility. Some
of the vehicle's systems operate differently from
those on a


conventional internal combustion
engine vehicle.
Your E-MEHARI uses energy stored in an
LMP
® (Lithium Metal Polymer) battery. The
LMP® battery has to be charged before you
can drive your E-MEHARI. The LMP® battery
progressively discharges during use of the
vehicle.
If the state of charge of the LMP
® battery is at
0%, your E-MEHARI cannot be started: the
LMP
® battery must be charged.
A full recharge (from 0% to 100%) on a normal
domestic power supply (standard charge) takes
between 8
and 13 hours on average depending
on the electrical system you have installed.
Your E-MEHARI uses two different types of
battery: the LMP
® battery to drive the vehicle
and a

12

V battery, as on a conventional
vehicle with an internal combustion engine.
The 12

V battery provides the energy needed
for operation of the vehicle's systems: e.g. the
audio system, the exterior and interior lighting,
the windscreen wipers.
.
Over view

22
Adjusting the driver's seat
and the passenger's seat
Never leave children unsuper vised inside
the vehicle.
Children could operate the switches and
controls.
Unsuper vised children run the risk of
a

serious accident.
The seat belts must be correctly adjusted.
The seat belts are more effective when
the passenger is seated fully back and
down in the seat.
Adjusting the seat forward
and backward
or backward to the desired position.
Release the lever to lock the seat in position.
After adjusting the position of the seat, move
the seat for ward and backward slightly to check
that it has locked in place.
Adjust the seats only when the vehicle
is stationary: other wise the seats might
move out of position unexpectedly while
the vehicle is moving and lead to loss of
control of the vehicle.
Do not touch the moving parts while
adjusting the position of the seat, so as to
avoid the risk of injury or damage to the
vehicle.
Adjusting the height of the
seat cushion
Operate the lever to raise or lower the rear part
of the seat to improve the ride comfort.
Adjusting the backrest
To recline the seat backrest, turn the knob to
the rear.
To straighten the backrest, turn the knob
forwards.
Hold the lever up while sliding the seat for ward
Ease of use and comfort

24
Folding rear bench seat
Your E-MEHARI has been type-approved as
a four-seat vehicle.
The rear bench seat is a
folding bench seat for
two people.
Only the backrest folds, the cushion remains
fixed.
Your E-MEHARI has been type-approved
for use on European roads carrying up to
4


people: the driver and three passengers.
You must never carry more than two
people on the bench rear seat.
Your E-MEHARI is fitted with 2
rear seat
belts.
Any additional passenger, who would
not be restrained, would risk serious or
fatal injuries and also risk injuring other
occupants of the vehicle.
Operation
Pull the controls (1) on each side of the bench
seat to release the latches (2) .
Fold the backrest (3) forward.
Adjusting the rear head
restraints
- To raise a head restraint: pull it up to the
desired position.
-

T
o lower a head restraint: push it down to
the desired position.
Never adjust the head restraints while the
vehicle is moving.
Take care not to trap the seat belts and
position the seat belt buckles correctly
before folding the backrest.
Steering wheel
(adjustment)
The height and reach of your E-MEHARI's
steering wheel are adjustable. Do not adjust the steering wheel while
driving the vehicle: this would risk causing
a
loss of control of the vehicle and could
lead to an accident.
Ease of use and comfort

33
Adjusting the headlamps
The headlamp beam height on your E-MEHARI
should be adjusted according to the load and
number of passengers in your vehicle, so as to
avoid causing a nuisance to other drivers.
Your E-MEHARI has a
thumbwheel for
adjusting the height of the beams.
Select the desired position using the headlamp
beam height adjustment control.
Use position "0" when driving without heavy
loads.
Wipers/Screenwash
Your E-MEHARI has two windscreen wipers.
To activate the wipers: turn the ring on the
control stalk located on the right behind the
steering wheel.
3
positions for the control:
-

P
osition 1: intermittent wipe.
-

P
osition 2: continuous wipe.
-

P
osition 3: fast continuous wipe.
Pushing the control stalk down gives a
single
wipe.
Operation of the screenwash: pull the wiper
control stalk towards you.
This action automatically operates the
windscreen wipers and the screenwash. In low temperatures, use a
screenwash
fluid with adequate protection against
freezing.
Do not operate the screenwash for more
than 30
seconds, as this could lead to
a
loss of visibility and cause an accident.
Do not operate the screenwash control
when the fluid reservoir is empty.
4
Lighting and visibility

73
Electric characteristics
Energy 30
kWh
Nominal voltage 410 V
Peak power 45
kW (30 s)
Min/max LMP
®
battery voltage 300/435 V
Capacity at C/4 75


Ah
Mass density 10 0


Wh/kg
Volume density 10 0


Wh/l
Maximum current 140


A
Your E-MEHARI contains a
high
voltage LMP
® battery isolated from its
surroundings by its unique packaging
arrangement.
The LMP
® battery must only be handled
by trained and qualified persons.
On-board charger
To make your E-MEHARI as versatile as
possible, it is fitted with an internal charger.
Your E-MEHARI can be charged from any
power point; the charger transforms the supply
to suit the LMP
® battery.
The charger in your E-MEHARI has the
following characteristics: Characteristics of the charger in your E-MEHARI
Operating voltage 230
V
Charger current rating 16


A
Charging power rating at 16 A 3,300
W
Charging power rating at 10 A 2,200
W
Dimensions/Weights
Exterior dimensions
Dimensions of your E-MEHARILength 3.81


m
Width 1.87
m (including the m i r r o r s)
Height 1.6 5


m
Interior dimensions
Interior volumes of your E- MEHARIBoot volume
200 litres/800 litres with
t he bench seat folded
Number of seats 4
9
Technical data