buttons Citroen GRAND C4 PICASSO RHD 2016 2.G User Guide
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2016, Model line: GRAND C4 PICASSO RHD, Model: Citroen GRAND C4 PICASSO RHD 2016 2.GPages: 523, PDF Size: 13.63 MB
Page 97 of 523

95
Dual-zone manual air conditioning with temperature regulation
The air conditioning system only works with the engine r unning.
The
 temperature  at  the  nozzles  and  vents Â
i
s  regulated  by  the  system  according  to  the Â
t
emperature  in  the  passenger  compartment Â
a
nd  the  temperature  setting.
Press the button for the Air conditioning
menu
 to  display  the  system  controls  page.Temperature adjustment
F Press one of these buttons to  reduce  (blue)  or  increase Â
(
red)  the  value.
Air flow adjustment
Press one of these buttons to
increase or  decrease  the  speed  of Â
t
he  air  booster  fan.
The
Â
driver
Â
and
Â
front
Â
passenger
Â
can
Â
each
Â
adjust
 t
he t
emperature i
ndependently.
The value indicated corresponds to a level of c
omfort  and  not  to  a  temperature  in  degrees  Celsius o
r  Fahrenheit  (depending  on  the  unit  selected).
A
 setting  of  around  21  provides  optimum  comfort.
 D
epending  on  your  requirements,  a  setting  between
 1
8  and  24  is  normal.
In addition, it is recommended that a difference between  left  and  right  of  more  than  3  should  be Â
av
oided. The
 air  flow  symbol  (a  fan)  fills  progressively Â
a
ccording  to  the  quantity  of  air  wanted.
By  reducing  the  air  flow  to  minimum,  you  are Â
s
topping
 v
entilation.
Avoid  driving  for  too  long  without Â
v
entilation  (risk  of  misting  and  d
eterioration  of  air  quality).
3
Ease of use and comfort
Page 98 of 523

96
Air intake / Air recirculation
The intake of exterior air prevents the formation of  mist  on  the  windscreen  and  side  windows.
The recirculation of interior air isolates the
passenger
 compartment  from  exterior  odours Â
a
nd  smoke.
F
P
ress the button to choose
how
 air  enters  the  passenger Â
c
ompartment.
Air conditioning On / Off
Switching on
Switching off
The air conditioning does not operate when  the  air  flow  adjustment  is  set Â
t
o off. F
P
ress this button to activate the
air  conditioning  system.
Avoid
Â
driving
Â
for
Â
too
Â
long
Â
without
Â
r
ecirculation
Â
of
Â
interior
Â
air
Â
(risk
Â
of
Â
m
isting
Â
and
Â
deterioration
Â
of
Â
air
Â
quality).
This
Â
function
Â
allows
Â
hot
Â
or
Â
cold
Â
air
Â
to
Â
be
Â
d
elivered
Â
selectively
Â
and
Â
more
Â
quickly.
The
Â
air  conditioning  is  designed  to  operate
 e
ffectively  in  all  seasons,  with  the  windows  closed.
It
Â
enables  you  to:
-
 l
ower  the  temperature,  in  summer,
-
 i
ncrease  the  effectiveness  of  the  demisting  in
 w
inter,  above  3°C.
F Â
P
ress  this  button  again  to Â
d
eactivate  the  air  conditioning Â
s
ystem.
Air distribution
adjustment
These buttons are used to arrange the  distribution  of  air  in  the  passenger Â
c
ompartment  by  combining  several  air  outlets.
Windscreen.
The
 air  distribution  can  be  adapted  by  using Â
s
everal  buttons:  illumination  of  the  button Â
c
onfirms  the  presence  of  fan  boosted  air  in  the Â
d
irection  indicated,  the  button  illumination  off Â
i
ndicates  the  absence  of  fan  boosted  air  in  the Â
d
irection
 i
ndicated.
For
 a  uniform  distribution  of  air  in  the Â
p
assenger  compartment,  the  three  buttons  can Â
b
e
 us
ed
 s
imultaneously.Footwells.
Central
 and  side  vents.When
 the  indicator  lamp  is  off,  air  is  taken  from Â
o
utside  the  vehicle.  When  the  indicator  lamp  is Â
o
n,  air  is  recirculated  from  inside  the  vehicle, Â
t
he  intake  for  air  outside  the  vehicle  is  inhibited.When
 the  indicator  lamp  is  on,  the  air Â
c
onditioning  function  is  activated.
When
 the  indicator  lamp  is  off,  the  air Â
c
onditioning  function  is  deactivated.
Ease of use and comfort
Page 99 of 523

97
Dual-zone automatic air conditioning
This air conditioning system operates with the  engine  running,  but  the  ventilation  and  its Â
c
ontrols  are  available  with  the  ignition  on.
Operation
 of  the  air  conditioning  and  regulation Â
o
f  temperature,  air  flow  and  air  distribution  in Â
t
he  passenger  compartment  are  automatic.Temperature adjustment
1. Driver/passenger side t emperature adj
ustment.
2.
 A
ir
 d
istribution
 a
djustment.
3.
 A
ir  flow  adjustment.
4.
 A
ir  intake  /  air  recirculation.
5.
 A
ir  conditioning  On  /  Off.
6.
 A
utomatic  mode.
7.
 A
ccess  to  the  secondary  page.The
 driver  and  front  passenger  can  each  set Â
t
he
 t
emperature
 i
ndependently.
F
P
ress one of these buttons
to  increase  or  decrease  the Â
va
lue.
The  value  indicated  corresponds  to  a  level  of Â
c
omfort  and  not  to  a  precise  temperature.
It
 is  recommended  that  you  avoid  a  left /right Â
s
etting  difference  of  more  than  3.
Press the button for the Air conditioning
menu
Â
to
Â
display
Â
the
Â
controls
Â
for
Â
the
Â
air
Â
c
onditioning
Â
system.
Air flow adjustment
Avoid driving for too long with the v
entilation  off  (risk  of  misting  and Â
d
eterioration  of  air  quality).
F
P
ress one of these buttons to
increase  or  decrease  the  speed Â
o
f  the  booster  fan.
The
Â
air  flow  symbol  (a  fan)  is  filled  in Â
p
rogressively  in  relation  to  the  quantity  of  air Â
w
anted.
By
Â
reducing  the  air  flow  to  minimum,  you  are Â
s
topping
 v
entilation.
" - - - "
Â
is  displayed.
3
Ease of use and comfort
Page 100 of 523

98
The air distribution in the passenger compartment  can  be  adjusted  by  combining  the Â
u
se  of  several  vents.
Air distribution adjustment
Windscreen.
Footwells.
Centre
 and  side  vents.
The
Â
air
Â
distribution  can  be  varied  by  using Â
m
ore
Â
than  one  button:  illumination  of  the Â
b
utton
Â
indicates  that  air  is  distributed  in  that Â
d
irection;
Â
no  illumination  indicates  that  air  is  not Â
d
istributed  in  that  direction.
In
Â
AUTO
Â
mode,  all  three  buttons  are  off.Switching off Switching on
Air conditioning On/Off
The air conditioning is designed to operate e
fficiently  in  all  seasons,  with  the  windows Â
c
losed.
It
 allows  you:
-
Â
i
n  summer,  to  lower  the  temperature,
-
Â
i
n  winter,  above  3  °C,  to  improve  demisting.
Avoid
 prolonged  operation  of  the  air Â
r
ecirculation  function  (risk  of  misting Â
a
nd  of  deterioration  of  the  air  quality).
When
 the  indicator  lamp  is  off,  the  intake  of Â
e
xterior  air  is  active.
When
 the  indicator  lamp  is  on,  air  recirculation Â
i
s  activated,  the  intake  of  exterior  air  is Â
in
hibited.F
P
ress this button to choose
the
 mode  for  air  entry  to  the Â
p
assenger
 c
ompartment.
The
 intake  of  exterior  air  avoids  misting  of  the  w
indscreen  and  side  windows.
Air
 recirculation  prevents  exterior  odours Â
a
nd  smoke  from  entering  the  passenger Â
c
ompartment.
This
 function  also  allows  faster  heating Â
o
r  cooling  of  the  air  in  the  passenger Â
c
ompartment.
Air intake/Air recirculation
F Press this  button  again  to  switch  o
ff  the  air  conditioning.
When
Â
the
 indicator  lamp  is  off,  the  air Â
c
onditioning  system  is  off.
F
P
ress this button to switch on the
air
 c
onditioning.
When
Â
the
 indicator  lamp  is  on,  the  air Â
c
onditioning  system  is  on.
The
Â
air
Â
conditioning  cannot  operate  when  the Â
a
ir
Â
flow
Â
is
 set  to  off.
Ease of use and comfort
Page 103 of 523

101
Settings for
passengers in
the 3
rd row of seats
F Press  the  vent  cover.
F  A djust  the  flow  of  air  to  the  two  vents  using Â
t
he  four-position  wheel  (off,  low,  medium, Â
h
i g h).
F
Â
D
irect  the  vent  by  turning  the  cover.
Ventilation with ignition on
function
With the ignition on, you can use the ventilation  system  and  have  access  to  the  Air
conditioning
Â
menu  to  adjust  the  air  flow  and Â
a
ir  distribution  in  the  passenger  compartment.
This
 function  is  available  for  a  few  minutes, Â
d
epending  on  the  state  of  charge  of  the  battery Â
o
f  your  vehicle.
This
 function  does  not  activate  the  air Â
c
onditioning.
You
 can  make  use  of  the  residual  heat  in  the Â
e
ngine  to  warm  the  passenger  compartment Â
u
sing  the  temperature  setting  buttons.
3
Ease of use and comfort
Page 155 of 523

153
Switching on / Pause
F Turn thumbwheel  1 to the "LIMIT" position:  t
he  speed  limiter  mode  is  selected  but  is Â
n
ot  switched  on  (Pause).
F
Â
S
witch  the  speed  limiter  back  on  by Â
p
ressing  button  4,
 if  the  speed  displayed Â
i
s  suitable  (by  default,  the  last  speed Â
pro
grammed).
F
Â
Y
ou  can  temporarily  stop  the  speed  limiter Â
b
y  pressing  button  4  again:  the  display Â
c
onfirms  that  it  has  been  stopped  (Pause).You
 do  not  have  to  switch  the  speed  limiter  on  i
n  order  to  set  the  speed.
Once
 the  function  is  selected,  you  can  modify Â
t
he  speed  setting  by:
-
Â
u
sing  buttons  2  and  3,
 raising  or  lowering Â
t
he  speed  displayed  :
F
Â
b
y  successive  short  presses,  to  modify Â
b
y  +  or  -  1  mph  (km/h),
F
Â
b
y  a  maintained  press,  to  modify  in  steps Â
o
f  +  or  -  5  mph  (km/h).
Adjusting the speed limiter
setting
- pressing button  5:
F  t he  six  speeds  memorised  are  displayed Â
i
n the touch screen tablet,
F
Â
p
ress  the  button  corresponding  to  the Â
l
imit  speed  chosen.
The
 value  is  displayed  in  the  instrument  panel.
The selection screen closes after a few
moments.
-
Â
b
y  pressing  button  5, if your vehicle has
speed
 limit  recognition:
F
Â
t
he  speed  to  memorise  is  displayed  in Â
t
he  instrument  panel,
F
press button 5 again
 to  save  the  speed.
The
 value  is  then  displayed  in  the  instrument Â
pan
el.
For
 more  information  on  Speed limit
recognition
Â
and  memorisation,  refer  to  the Â
c
orresponding
 s
ection.
4
Driving
Page 158 of 523

156
Exceeding the programmed
speed
If the cruise speed setting is exceeded, the displayed  speed  flashes.
The
 display  becomes  steady  again  once  the Â
v
ehicle  returns  to  the  cruise  speed  setting.
Switching off
F Turn thumbwheel  1 to the "0" p osition. T
he  display  of  information  related  to  the Â
c
ruise  control  disappears.
Switching on
Once the cruise control is switched on, you can  modify  the  cruising  speed  in  one  of  the Â
f
ollowing
 w
ays:
-
Â
u
sing  buttons  2 or 3:
F
Â
b
y  successive  short  presses,  to  modify Â
t
he  speed  by  +  or  -  1  mph  (km/h),
F
Â
b
y  a  long  press,  to  modify  the  speed  in Â
s
teps  of  +  or  -  5  mph  (km/h),
-
Â
b
y  pressing  button  5:
F
Â
t
he  six  memorised  speeds  are  displayed Â
i
n the touch screen tablet,
F
Â
c
hoose  a  value:  it  is  displayed  in  the Â
in
strument
 pan
el.
The selection screen closes after a few
moments.
The
 modification  is  then  accepted.
F
Â
T
urn
Â
thumbwheel
Â
1 to the "CRUISE"
position:
Â
the
Â
cruise
Â
control
Â
mode
Â
is
 s
elected
Â
but
Â
is
Â
paused.
F
P
ress button 2 or 3 :
Â
your
Â
vehicle's
Â
current
Â
s
peed
Â
becomes
Â
the
Â
cruise
Â
speed.
The
Â
cruise
Â
control
Â
is
Â
activated
Â
(ON).
Modification of the cruise speed
(speed setting)
- by  pressing  button  5, if your vehicle has
speed  limit  recognition:
F
Â
t
he  speed  to  memorise  is  displayed  in Â
t
he  instrument  panel,
F
press button 5 again
 to  save  the  speed.
The
 value  is  then  displayed  in  the  instrument Â
pan
el.
For
 more  information  on  Speed limit
recognition
Â
and  memorisation,  refer  to  the Â
c
orresponding
 s
ection.
Pause
You can pause the cruise control at any time by  pressing  button  4:
 the  screen  confirms  the Â
pa
use.
Driving
Page 159 of 523

157
Flashing of the dashes indicates a fault with the cruise  control.
Have
 it  checked  by  a  CITROËN  dealer  or  a Â
q
ualified
 w
orkshop.
Operating faultWhen the cruise control is switched on, be  careful  if  you  maintain  the  pressure Â
o
n  one  of  the  programmed  speed Â
c
hanging  buttons:  this  may  result  in  a Â
v
ery  rapid  change  in  the  speed  of  your Â
v
ehicle.
Do not use the cruise control on
slippery
 roads  or  in  heavy  traffic.
On
 a  steep  descent,  the  cruise  control Â
w
ill not be able to prevent the vehicle
from
 exceeding  the  programmed  speed.
On
 steep  climbs  or  when  towing,  the Â
p
rogrammed  speed  may  not  be  reached Â
o
r  maintained.
The
 use  of  mats  not  approved  by Â
C
ITROËN  may  inter fere  with  the Â
o
peration  of  the  cruise  control.
To
 avoid  any  risk  of  jamming  of  the Â
ped
als:
-
Â
e
nsure  that  the  mat  is  secured Â
c
o r r e c t l y,
-
Â
n
ever  fit  one  mat  on  top  of  another.
4
Driving
Page 162 of 523

160
1. Select cruise  control  mode.
2. U se  the  current  speed  of  the  vehicle  as Â
t
he  cruise  speed  setting  /  Lower  the  speed Â
se
tting.
3.
 U
se  the  current  speed  of  the  vehicle  as Â
t
he  cruise  speed  setting  /  Raise  the  speed Â
se
tting.
4.
 P
ause  /  Resume  the  cruise  control.
5.
 D
isplay  the  list  of  memorised  speeds,  or
 A
ccept  the  speed  suggested  by  the  speed Â
l
imit  recognition  system.
6.
 S
elect  the  inter-vehicle  distance  ("Close ",
" Normal ", "Distant ")
For
 more  information  on  Memorising speeds,
refer
 to  the  corresponding  section.
For
 more  information  on  Speed limit
recognition
Â
and  its  memorisation,  refer  to  the Â
c
orresponding
 s
ection.
Steering mounted controls
Switching on
The active cruise  control  must  be  selected  in  t
he Driving menu.
F
Â
T
urn  the  thumbwheel  1 to the "CRUISE"
position:
 cruise  control  mode  is  selected, Â
b
ut  is  paused.
F
P
ress one of the buttons 2 or 3 :
 the  current Â
s
peed  of  your  vehicle  becomes  the  cruise Â
s
peed  setting.
The
 cruise  control  is  activated  (ON).
By
 default,  the  inter-vehicle  time  is  set  at Â
2Â s
econds.
Other wise,
 the  last  speed  value  set  will  be  used Â
f
or  operation  of  the  system.
Modification of the cruise control
speed
- using buttons  2  or  3:
F  b y  successive  short  presses,  to  modify Â
b
y  steps  of  +  or  -  1  mph  (km/h),
F
Â
b
y  a  maintained  press,  to  modify  in  steps Â
o
f  +  or  -  5  mph  (km/h).
-
Â
b
y  pressing  button  5:
F
Â
t
he  six  memorised  speed  settings  are Â
d
isplayed  in  the  touch  screen  tablet,
F
Â
c
hoose  a  speed  setting:  it  is  displayed  in Â
t
he  instrument  panel.
The selection screen closes after a few
moments.
 The  modification  is  then  taken  into Â
a
ccount.
-
Â
b
y  pressing  button  5, if your vehicle has
speed
 limit  recognition:
F
Â
t
he  speed  to  memorise  is  displayed  in Â
t
he  instrument  panel,
F
press button 5 again
 to  save  the  speed.
The
 speed  setting  is  then  displayed  in  the Â
in
strument
 pan
el.
As
Â
a
Â
precaution,
Â
it
Â
is
Â
recommended
Â
that
Â
y
ou
Â
select
Â
a
Â
speed
Â
setting
Â
close
Â
to
Â
the
Â
c
urrent
Â
speed
Â
of
Â
your
Â
vehicle.
Operation
For more information on Speed limit
re cognition and  its  memorisation,  refer  to  the Â
c
orresponding
 s
ection.
Driving
Page 166 of 523

164
In the event of a fault with the dynamic cruise control,  you  are  alerted  by  an  audible  signal Â
a
nd  the  display  of  the  message  "Driving  aid Â
f
unctions
 f
ault".
Have
 the  system  checked  by  a  CITROËN Â
d
ealer  or  a  qualified  workshop. When
 the  cruise  control  is  working,  take Â
c
are  if  making  a  maintained  press  on Â
o
ne  of  the  cruise  control  programmed Â
s
peed  modification  buttons:  this  can Â
l
ead  to  a  very  quick  change  in  the Â
s
peed  of  your  vehicle.
Do
 not  use  the  dynamic  cruise  control Â
o
n  slippery  sur faces  or  in  heavy  traffic.
When
 descending  a  steep  hill,  the Â
c
ruise  control  may  not  be  able  to Â
p
revent  the  vehicle  from  exceeding  the Â
pro
grammed
 s
peed.
When
 ascending  a  steep  hill  or  when Â
t
owing,  it  might  not  be  possible  to  attain Â
o
r  maintain  the  programmed  speed.
Operating fault
The operation of the radar, located in the  front  bumper,  may  be  disturbed  by Â
a
ccumulations  of  grime  (dust,  mud...) Â
o
r  in  certain  weather  conditions  (snow, Â
i
ce...).
The
 message  "SYSTEM  INACTIVE: Â
V
isibility  reduced"  is  displayed  to  signal Â
t
hat  the  system  has  been  put  into Â
s
t a n dby.
Clean
 the  front  bumper  regularly.
The
Â
use
Â
of
Â
mats
Â
not
Â
approved
Â
by
Â
C
ITROËN
Â
may
Â
inter fere
Â
with
Â
the
Â
o
peration
Â
of
Â
the
Â
cruise
Â
control.
To
Â
avoid
Â
any
Â
risk
Â
of
Â
jamming
Â
the
Â
pedals:
-
Â
e
nsure
Â
that
Â
mats
Â
are
Â
secured
Â
c
o r r e c t l y,
-
Â
n
ever
Â
fit
Â
one
Â
mat
Â
on
Â
top
Â
of
Â
another.
Driving