bulb Citroen JUMPER 2016 2.G User Guide

153
jumper_en_Chap08_Aide-rapide_ed01-2015
rear lamps
Carry out these operations in reverse order
to fit the new bulb.
1.
Brake lamps


t
ype B,

P21W - 21W
2.

Brake/sidelamps


t
ype B,

P21/5W - 21W and 5W
3.
d
irection indicators

t
ype B,

PY 21W - 21W
4.
r
eversing lamps

t
ype A,

W16W - 16W
5.

Foglamp


t
ype A,

W16W - 16W -
i dentify the failed bulb then open the
rear doors.
- r emove the corresponding access cover
by removing the seven fixing screws
(van) or


r emove the corresponding access cover
by pulling on its grip to unclip it (combi).
-

Disconnect the electrical connector by

pressing on its central tongue.
-
r emove the two fixing nuts of the lens.
-

Pull the lens from the outside.-

r emove the six bulb holder fixing
screws.
-
Spread the three retaining tongues and

remove the bulb holder from its housing.
-
Change the bulb.
For more information on the bulbs,

refer to the table "Types of bulb or
lamp".
Failed bulb or lamp
QUiCK HELP
8

154
jumper_en_Chap08_Aide-rapide_ed01-2015
third brake lamp
type A, W5W - 5W (x 4)
- r emove the two lamp fixing screws.
-
r emove the lamp by pulling it towards
you.
number plate lamps
type c , C5W - 5W
-
Press the point, indicated by the arrow
,
then remove the plastic lens.
-
r emove the failed bulb by moving aside
the two contacts.
-

With the new bulb in place, ensure that

it is secured correctly between the two
contacts.
-
r eplace the plastic lens and press on it
to lock it in place. -
r emove the bulb holder by squeezing
the two tabs.
- r emove the failed bulb by pulling it out.
-

Change the bulb.
Failed bulb or lamp

251
jumper_en_Chap11_Particularites_ed01-2015
PrESEntAtIO n
Chassis cab and floor cab versions have a cab, a fixed floor and two spe\
cific rear lamp
clusters.
These versions are also available with:
-

a crew cab,
-


a tipper body
.
changing a bulb
For more information on bulbs, refer to
the table "Types of bulb and lamp" in
the "Quick help" section.
r
ear lamps
Carry out the operations in reverse order to
refit each bulb.
1.
d
irection indicators
type B,

PY21W - 21W
2.

Brake lamps
type B,

P21W - 21W
3.

Sidelamps
type A,

W5W - 5W
4.
r
eversing lamps
type A,

W16W - 16W
5.

Foglamps
type A,

W16W - 16W-
i dentify the failed bulb.
-
r emove the four lamp unit fixing screws.
-

Pull the lamp unit out towards you.
-

r eplace the bulb.
For more information on these versions, refer to the corresponding secti\
on.
SPECiAL FEATUrES
Chassis cab / Floor cab