Head light Citroen NEMO 2008 1.G User Guide

Citroen NEMO 2008 1.G User Guide NEMO 2008 1.G Citroen Citroen https://www.carmanualsonline.info/img/9/4202/w960_4202-0.png Citroen NEMO 2008 1.G User Guide

Page 72 of 131

Citroen NEMO 2008 1.G User Guide 66
Seats
       REAR BENCHSEAT 
  Table position 
 Press at the same time on the head restraint 
and its tab to move it to its lowest position.
Release the backrest by pushing on the two 
side control

Page 73 of 131

Citroen NEMO 2008 1.G User Guide 67
4
ERGONOMICS and COMFORT
   Seats   
  Replacing the benchseat 
 Place the benchseat in the fully folded 
position in its front anchorages.
Fold the benchseat in the table position, 
the front and

Page 90 of 131

Citroen NEMO 2008 1.G User Guide 85
5
SAFETY
   Air bags   
   For the air bags to be fully effective, observe the following safety rules: 
 Sit in a normal upright position.  
 Wear a correctly adjusted seat belt. 
 Do not leave any

Page 93 of 131

Citroen NEMO 2008 1.G User Guide 85
5
SAFETY
   Air bags   
   For the air bags to be fully effective, observe the following safety rules: 
 Sit in a normal upright position.  
 Wear a correctly adjusted seat belt. 
 Do not leave any

Page 112 of 131

Citroen NEMO 2008 1.G User Guide 104
Changing a bulb   
  FRONT LIGHTS 
 Open the bonnet. To access the bulbs, reach  
behind the headlamp unit. 
 Remove the protective covers to gain 
access to the bulbs. 
 Carry out the operations

Page 113 of 131

Citroen NEMO 2008 1.G User Guide 105
7
TROUBLESHOOTING
 Changing a bulb 
  1 - Dipped headlamp 
  
Type D  , H4 - 55W 
   -   Remove the cover by turning it  anticlockwise. 
  -   Disconnect the electrical connector.  
  -   Release

Page 120 of 131

Citroen NEMO 2008 1.G User Guide 110
Changing a fuse   
  
Identification 
mark      
Amperage      
Functions   
 F12   7.5 A   Right-hand dipped headlamp supply  
 F13   7.5 A   Left-hand dipped headlamp supply - hea dlamp height a

Page 122 of 131

Citroen NEMO 2008 1.G User Guide 111
7
TROUBLESHOOTING
   Changing a fuse   
  
�I�d�e�n�t�i�fi� �c�a�t�i�o�n� �m�a�r�k     
Amperage      
Functions   
 F01   60 A   Control unit  
 F03   20 A   Starter supply  
 F04   40 A   ABS h
Page:   < prev 1-10 11-20