bulb Citroen NEMO 2015 1.G User Guide

139
ROOF RACK AND ROOF BARS
To install the transverse roof bars or a
roof rack, use the fixings provided for this
purpose.
Maximum load: 75 kg
OTHER ACCESSORIES
A wide range of accessories and genuine
parts is offered by the CITROËN network.
These accessories and parts have been
tested and approved both for reliability and
for safety.
They all benefit from CITRo Ë n 's
recommendation and warranty.
Never exceed the gross vehicle weight
(GVW).
Range of professional equipment
The replacement parts department publishes
an accessory catalogue offering various
equipment and fittings, such as:
-
wooden protective floor
, non-slip wooden
floors, wooden side protectors, glass
protection grilles,
-

roof rack, set of transverse roof bars,

loading roller,
-

towbars, towbar harnesses with

7/13 sockets, 7/7 sockets, 13 socket... The fitting of electrical equipment or
accessories not listed by CITR
o Ë n

may result in the failure of your vehicle's

electronic system or high consumption.
Please note this specific warning. You
are advised to contact a representative
of CITROËN to be shown the range of
recommended equipment and accessories.
Depending on the country in which the
vehicle is sold or operated, it may be
compulsory to have a high visibility vest,
warning triangle, replacement bulbs and
fuses available in the vehicle.
Before installing accessory radio
communication transmitters with
external aerial on your vehicle, you can
contact a CITR
o Ë n dealer, who will provide
the specification (frequency band, maximum
output power, aerial position, specific
installation conditions) of the transmitters
which can be fitted, in accordance with the
Motor Vehicle Electromagnetic Compatibility
Directive (2004/104/EC).
When fitting a towbar and harness
outside the CITR
o Ë n dealer
network, the installation must be done
using the electrical pre-equipment on the
vehicle and following the manufacture's
recommendations.
7
ACCESSORIES
Equipment

161
Front lamps
open the bonnet. To access the bulbs, reach
behind the headlamp unit.
Remove the protective covers to gain

access to the bulbs.
Carry out the operations in reverse order to
refit each bulb.
CHANGING A BULB
Types of bulb
Various types of bulb are fitted on your
vehicle.
To remove them:
1.

T
ype A
Entirely glass bulb: pull gently as it is


fitted by pressure.
2.

T
ype B
Bayonet bulb: press on the bulb then turn


it anticlockwise.
3.

T
ype C
Cylindrical bulb: move aside the contacts.
4.


T
ype D -E
Halogen bulb: release the retaining


spring from its housing.
High pressure washing
When using this type of washing on
stubborn dirt, do not persist very long on
the headlamps, or on other lamps and their
edges to avoid damaging their coating and
seals.
9
QUICK HELP
Changing a bulb

162
1 - Dipped beam headlamps
Type D, H4 - 55 W
-
Remove the cover by turning it

anticlockwise.
-

Disconnect the electrical connector
.
-

Release the retaining spring by pressing

on the two clips.
-

Change the bulb taking care to align the

metal part with the grooves on the lamp.
2 - Sidelamps
Type A, W 5 W - 5 W
-

Remove the cover by turning it

anticlockwise.
-

Pull the bulb holder to gain access to the

bulb.
-

Change the bulb. 3 - Main beam headlamps
T

ype D, H4 - 55 W
-

Remove the cover by turning it

anticlockwise.
-

Disconnect the electrical connector
.
-

Release the retaining spring by pressing

on the two clips.
-

Remove the bulb holder
.
-

Change the bulb taking care to align the

metal part with the groove on the lamp. 4 - Direction indicators
Type B, PY 21 W - 21 W amber
-

T
urn the bulb holder a quarter turn
anticlockwise.
-
Remove the bulb by pressing it lightly

while turning it anticlockwise.
-
Change the bulb.
If you encounter any dif
ficulty, consult a
CITROËN dealer or a qualified workshop.
When each operation has been completed,
check the operation of the lamps.
5 - Foglamps
Type E, H1 - 55 W
Contact a CITR
o Ë n dealer or a qualified
workshop.
Changing a bulb

163
Front / rear courtesy lamps
Type C, 12 V 10 W - 10 W
-
Release the courtesy lamp using a

screwdriver.
-

Remove the cover to gain access to the

bulb.
-

Change the bulb moving aside the two

contacts.
-

Ensure that the new bulbs are secured

correctly between the two contacts.
-

Close the protective flap.
-


Fix the courtesy lamp in its housing and

ensure that it is secured correctly.
Direction indicator side repeaters
Type A, WY 5 W - 5 W amber
-
Push the repeater rearwards and
release it.
-

Support the connector and turn the bulb

holder a quarter of a turn to the left.
-

T
urn the bulb a quarter of a turn to the
left.
-

Pull the bulb then change it.
-


When refitting, engage the repeater

rearwards then move it forwards.
9
QUICK HELP
Changing a bulb

164
Rear lamps
- Identify the faulty bulb then open the rear
doors.
-

Unscrew the two screws using the

screwdriver supplied in the tool kit
(behind the driver's seat) and extract the
bulb holder.
-

Release the lamp unit.
-


Disconnect the electrical connector
.
-

Remove the support by moving aside the

tabs.
-

Change the bulb.
Number plate lamps
Type A, C 5 W - 5 W
-
Unclip the transparent cover using

the screwdriver supplied in the tool kit
(behind the driver's seat) and extract the
bulb holder.
-

Change the bulb by moving aside the two

contacts.
-

Ensure that the new bulbs are secured

correctly between the two contacts.
-

Replace the plastic lens and press on it.
For further information concerning the bulbs,


refer to the table "Types of bulb".
1.

Brake lamps



T

ype B, P 21 W - 21 W
2.

Direction indicators



T

ype B, PY 21 W - 21 W amber
3.

Reversing lamps



T

ype B, P 21 W - 21 W
4.

Sidelamps / Foglamps
T

ype B, P4/21W - 4W/21W On the hinged rear doors On the tailgate
Changing a bulb

165
Third brake lamp
On the hinged rear doors
Type B, W 5 W - 5 W (4 bulbs)
-
Unclip the transparent cover using the

screwdriver located in the tool kit.
-

Disconnect the electrical connector
.
-

Remove the bulb holder by squeezing the

two tabs.
-

Remove the faulty bulb.
-


Change the bulb. On the tailgate
T

ype B, W5W - 5W (5 bulbs)
-

Open the tailgate.
-


Remove the two cover retaining screws,

then the cover.
-

Remove the bulb holder by squeezing the

two tabs.
-

Remove the faulty bulb.
-


Change the bulb.
If you encounter any dif

ficulty, consult a
CITROËN dealer or a qualified workshop.
9
QUICK HELP
Changing a bulb