petrol Citroen XSARA 2005 1.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2005, Model line: XSARA, Model: Citroen XSARA 2005 1.GPages: 462, PDF Size: 10.48 MB
Page 39 of 462

Downloaded from www.Manualslib.com manuals search engine 33
GENERAL
SOUTH-EAST ASIA
Philippines
Singapore
Taiwan
Thailand
Vietnam
LUBRICANTS - TOTAL recommended oils
7000 15W50
7000 10W40
7000 15W50
7000 15W50
ENGINE OILS
TOTAL QUARTZ
Blended oils for all enginesOils specifically for petrol and
dual-fuel petrol / LPG enginesOils specifically for diesel
engines TOTAL QUARTZ DIESEL
9000 5W40
7000 10W40
(*) Blended oils for all engines, giving fuel economy.
Angl.-t2-page001-39-2005 9/01/06 10:07 Page 33
Page 40 of 462

Downloaded from www.Manualslib.com manuals search engine 34
GENERAL
MIDDLE EAST
7000 15W50
7000 10W40
7000 15W50
7000 15W50 Saudi Arabia - Bahrain
Dubai
United Arab Emirates
Iran
Israel - Jordan - Kuwait - Lebanon
Oman - Qatar - Syria - Yemen
LUBRICANTS - TOTAL recommended oils
ENGINE OILS
TOTAL QUARTZ
Blended oils for all enginesOils specifically for petrol and
dual-fuel petrol / LPG enginesOils specifically for diesel
engines TOTAL QUARTZ DIESEL
9000 5W40
7000 10W40
Angl.-t2-page001-39-2005 9/01/06 10:07 Page 34
Page 45 of 462

Downloaded from www.Manualslib.com manuals search engine 39
GENERAL
ENGINE OIL CONSUMPTION
I -Oil consumption depends on:
- the engine type.
- how run-in or worn it is.
- the type of oil used.
- the driving conditions.
II - An engine can be considered RUN-INafter:
- 3,000 miles
(5,000 km)for a PETROLengine.
- 6,000 miles (10,000 km)for a DIESELengine.
III - MAXIMUM PERMISSIBLEoil consumption for a RUN-IN engine:
- 0.5 litres per 600 miles
(1,000 km)for a PETROLengine.
- 1 litre per 600 miles (1,000 km)for a DIESELengine.
DO NOT INTERVENE BELOW THESE VALUES.
IV - OIL LEVEL:The level should NEVERbe above the MAX.mark on the dipstick after changing or topping up the oil:
- This excess oil will be used up rapidly.
- It will reduce the engine output and adversely affect the operation of the air circuits and gas recycling.
Angl.-t2-page001-39-2005 9/01/06 10:07 Page 39
Page 46 of 462

Downloaded from www.Manualslib.com manuals search engine ENGINE SPECIFICATIONS
Petrol engines
Engine type
Cubic capacity (cc)
Bore/stroke
Compression ratio
Power ISO or EEC (KW - rpm)
Torque ISO or EEC (m.daN - rpm)TU1JP TU3JP ET3J4 TU5JP+ TU5JP4 EW7J4 EW10A EW10J4 EW10J4S
HFX KFW KFU NFV NFU 6FZ RFJ RFN RFK
1124 1360 1587 1749 1997
72/69 75/77 78,5/82 82,7/81,4 85/88
10,5/1 11/1 10,5/1 11/1 10,8/1 11/1 10,8/1 11/1
44,1-5500 55-5500 65-5250 70-5700 80-5800 85-5500 103-6000 100-6000 13-7000
94-3500 12-2800 13,3-4250 13,5-3000 14,7-4000 16-4000 20-4000 19-4100 20,2-4750
40
ENGINE
All Types
Angl.-t2-page040-134-2005 9/01/06 10:11 Page 40
Page 160 of 462

Downloaded from www.Manualslib.com manuals search engine 154
ENGINEAUXILIARY EQUIPMENT DRIVE BELT
Engines: All Types Petrol and Diesel
Tools.
- Belt tension measuring instrument: 4122 - T (C.TRONIC 105.5).
WARNING: If using tool 4099-T (C.TRONIC 105).
Essential.
- Before refitting the auxiliary equipment drive belt, check that:
- 1 / The roller(s) rotate freely (no play or stiffness).
- 2 / The belt is correctly engaged in the grooves of the various pulleys.
Angl.-t2-page135-239-2005 9/01/06 10:13 Page 154
Page 285 of 462

Downloaded from www.Manualslib.com manuals search engine ENGINE
279
C4CHECKING THE OIL PRESSURE
Petrol Diesel
Engine type KFU NFU RFJ RFN RFK 9HX 9HY 9HZ RHR
Temperature (°C) 90° 80°
Pressure (bars) 1,5 3 1,3 1,9
Rpm1000
Pressure (bars) 3 5,6 4
Rpm 2000 2000 2000
Pressure (bars) 5 6,3
Rpm 3000 3000
Pressure (bars) 43,5
Rpm 40004000
Tools (Toolkit 4103)
2279-T.Bis X X X X X X X X X
4103-T X X X X X X X X X
(-).0710.F1 X
(-).0710.B1 X
(-).1503.JXX X
4103-T.B X X
7001-T X X X X X
4202-T X X
NOTE: The oil pressure should be checked with the engine hot, after the oil level has been checked.
Angl.-t2-page240-282-2005 9/01/06 10:16 Page 279
Page 286 of 462

Downloaded from www.Manualslib.com manuals search engine 280
ENGINECHECKING THE OIL PRESSURE
To be read with the Petrol and Diesel correspondence tables
XSARA
Engine type KFW NFU RFN 8HZ 8HX WJY RHY RHZ
Temperature (°C) 90°C
Pressure (bars) 1,5 1,3 1,8 2
Rpm 1000 1000
Pressure (bars) 3
Rpm 2000
Pressure (bars) 4
Rpm 3000
Pressure (bars) 5,1 3,5 4,5 4
Rpm4000
Tools (Toolkit 4103-T)
2279-T.Bis X X X X X X X
4103-T X X X X X X X
4202-T X X X
1503-JX
3099-TX
7017-T.X23X
NOTE: The oil pressure should be checked with the engine hot, after the oil level has been checked.
XSARA
Angl.-t2-page240-282-2005 9/01/06 10:16 Page 280
Page 287 of 462

Downloaded from www.Manualslib.com manuals search engine 281
ENGINE
CHECKING THE OIL PRESSURE
To be read with the Petrol and Diesel correspondence tables
XSARA PICASSO
Engine type NFV 6FZ RFN 9HZ 9HY RHY
Temperature (°C) 90°C 80°C 90°C
Pressure (bars) 3,3 1,5 1,3 2
Rpm 1000
Pressure (bars) 3
Rpm 2000
Pressure (bars) 5
Rpm 3000
Pressure (bars) 4 6,3 3,5 4
Rpm 4000 4000
Tools (Toolkit 4103-T)
2279-T.Bis X X X X X X
4103-T X X X X X X
7001-T X
4202-T X X X
1503-J X X
NOTE: The oil pressure should be checked with the engine hot, after the oil level has been checked.
XSARA PICASSO
Angl.-t2-page240-282-2005 9/01/06 10:16 Page 281
Page 313 of 462

Downloaded from www.Manualslib.com manuals search engine 307
CLUTCH
GEARBOX
TRANSMISSION
CLUTCH SPECIFICATIONS
Engine type KFU NFU RFN RFK
Gearbox type MA5/L MA5/N BE4/5N BE4R/5S
SupplierSACHS VALEO VALEO VALEO
Mechanism/type200 MF 3850 200 CPX 3850 230 DNG 5100 230 DNG 5100
Hub discSAE 24/48-18Z 11 RX 11 R 14X 11 R 14X
Ø of lining. ext/int200/134 200/137 228.6/155 228.6/155
Quality of liningF810 DS 810 DS 810 DS 810 DS
ET3J4 TU5JP EW10J4 EW10J4S
Petrol
C4
Angl.-t2-page306-360-2005 9/01/06 10:20 Page 307
Page 360 of 462

Downloaded from www.Manualslib.com manuals search engine 354
CLUTCH
GEARBOX
TRANSMISSION
AL4 GEARBOX CONTROLS
In passenger compartment.
The selector control has 6 positions.
The gear selector is guided by the shape of the stepped gate and by a retaining spring
which pulls it to the left hand side.
Push the lever to the right to exit from position «P».
NOTE: The vehicle is equipped with the «shift lock»: you have to switch on the ignition
and press the brake pedal to unlock the selector lever from position «P».
P:Park
(system locked).
R:Reverse gear.
N:Neutral.
D:Automatic
(1st to 4th gear).
3:Automatic (1st to 3rd gear).
2:Automatic (1st to 2nd gear).
A switch located to the left of the gear control allows the driver to choose from these
programmes:
- Normal: Conventional use of the automatic gearbox.
- Sport:This programme favours performance.
- Snow:In position «D», starting is in 2ndgear for diesel and in 3rdgear for petrol.
NOTE:Only the positions «P»or «N»authorise the starting of the engine.
Engines: NFU - RFN - RHZ
XSARA
B2CP3ADC
Angl.-t2-page306-360-2005 9/01/06 10:20 Page 354