Downloaded from www.Manualslib.com manuals search engine 61A-29
HEATING
Control panel: Removal - Refitting
61A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aLock the airbag computer (see Fault finding - Re-
placement of components) (88C, Airbags and pre-
tensioners).
aDisconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
aRemove:
-the driver's front airbag (see Driver's frontal air-
bag: Removal - Refitting) (88C, Airbags and pre-
tensioners),
-the steering wheel (see Steering wheel: Removal
- Refitting) (36A, Steering assembly),
-the steering column switch assembly (see Steer-
ing column switch assembly: Removal - Refit-
ting) (84A, Control - Signals),
-the instrument panel (see Instrument panel: Re-
moval - Refitting) (83A, Instrument panel),
-the storage compartment,
-the radio (see Radio: Removal - Refitting) (86A,
Instrument panel),
-the dashboard (see Dashboard: Removal - Refit-
ting) (57A, Interior equipment).
aPlace:
-the air mixing control to the hottest position,
-the air distribution control to the air vent position on
the dashboard,
-the air recirculation switch to the air recirculation
position.
aDisconnect the climate control panel connector .II - REMOVAL OPERATION
aFor the air mixing cable (10) , remove:
-the sheath stop by moving the tab (11) to one side,
-the control panel cable at (12) .
aFor the air distribution control cable (13) , remove:
-the sheath stop by moving the tab (14) to one side,
-the control panel cable at (15) .
aFor the air recirculation cable (16) , remove:
-the sheath stop by moving the tab (17) to one side,
-the control panel cable at (18) .
aRemove the climate control control panel.
REFITTING
aProceed in the reverse order to removal.
aCheck that the controls can be moved to their fullest
extent.
aUnlock the airbag computer (see Fault finding - Re-
placement of components) (88C, Airbags and
pretensioners). H79
125537
