air condition DACIA DUSTER 2009 1.G Heating And Air Conditioning Workshop Manual
[x] Cancel search | Manufacturer: DACIA, Model Year: 2009, Model line: DUSTER, Model: DACIA DUSTER 2009 1.GPages: 54, PDF Size: 1.16 MB
Page 1 of 54
Downloaded from www.Manualslib.com manuals search engine © Renault s.a.s 2007 "The repair procedures given by the manufacturer in this document are based on the
technical specifications current when it was prepared.
The procedures may be modified as a result of changes introduced by the manufacturer in
the production of the various component units and accessories from which the vehicles are
constructed".All rights reserved by Renault.
Copying or translating, in part or in full, of this document or use of the service part reference
numbering system is forbidden without the prior written authority of Renault.
NOVEMBER 2009 EDITION ANGLAISE
X79
6Air conditioning
61AHEATING
62AAIR CONDITIONING
Page 2 of 54
Downloaded from www.Manualslib.com manuals search engine DUSTER - Chapitre 6
Contents
Pages
DUSTER - Chapitre 6ContentsPages
61A HEATING
Heating: List and location of
components 61A-1
Cabin filter: Removal -
Refitting 61A-8
Front air distribution duct:
Removal - Refitting 61A-9
Rear air distribution duct:
Removal - Refitting 61A-10
Recirculation control cable:
Removal - Refitting 61A-11
Air distribution cable:
Removal - Refitting 61A-13
Air mixing cable: Removal -
Refitting 61A-15
Distribution unit: Removal -
Refitting 61A-17
Heater matrix: Removal -
Refitting 61A-21
Fan assembly: Removal -
Refitting 61A-24
Heating resistor relays:
Removal - Refitting 61A-25
Heating resistors: Removal -
Refitting 61A-26
Passenger compartment fan
assembly control unit:
Removal - Refitting 61A-28
Control panel: Removal -
Refitting 61A-2962A AIR CONDITIONING
Air conditioning: List and
location of components 62A-1
Air conditioning: Parts and
consumables for the repair 62A-9
Condenser: Removal -
Refitting 62A-10
Compressor : Removal -
Refitting 62A-12
Expansion valve: Removal -
Refitting 62A-16
Refrigerant pipe seal:
Removal - Refitting 62A-18
Refrigerant circuit pipe:
Removal - Refitting 62A-21
Pressure sensor: Removal -
Refitting 62A-23
Page 9 of 54
Downloaded from www.Manualslib.com manuals search engine 61A-7
HEATING
Heating: List and location of components
61A
3Expansion valve (see 62A, Air conditioning, Expansion valve:
Removal - Refitting, page 62A-16)
4Passenger compartment fan assembly control
unit (see 61A, Heating, Passenger compartment
fan assembly control unit: Removal - Refit-
ting, page 61A-28)
5Heater matrix (see 61A, Heating, Heater matrix: Removal -
Refitting, page 61A-21)
6Air distribution cable (see 61A, Heating, Air distribution cable:
Removal - Refitting, page 61A-13)
7Recirculation control cable (see 61A, Heating, Recirculation control
cable: Removal - Refitting, page 61A-11)
8Air mixing cable (see 61A, Heating, Air mixing cable: Removal
- Refitting, page 61A-15)
9Heating resistors (VALEO type) (see 61A, Heating, Heating resistors:
Removal - Refitting, page 61A-26)
10Evaporator sensor (VALEO type) (see Evaporator sensor: Removal - Refitting)
11Front side air distribution duct (see 61A, Heating, Front air distribution duct:
Removal - Refitting, page 61A-9)
12Front central air distr ibution duct
13C-pillar air distribution duct (see 61A, Heating, Rear air distribution duct:
Removal - Refitting, page 61A-10)
14A-pillar air distribution duct (see Front footwell air distribution duct:
Removal - Refitting)
Page 10 of 54
Downloaded from www.Manualslib.com manuals search engine 61A-8
HEATING
Cabin filter: Removal - Refitting
AIR CONDITIONING
61A
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
aUnclip the passenger compartment filter (1) .
aRemove the cabin filter.
REFITTING
I - REFITTING PREPARATIONS OPERATION
aCheck for foreign bodies in the cabin filter housing,
and clean thoroughly if necessary.
II - REFITTING OPERATION FOR PART
CONCERNED
aRefit the cabin filter.
aClip on the cabin filter.
112763
Note:
Foreign bodies (leaves, insects etc.) are likely to
accumulate in the passenger compartment filter.
Remove the cabin filter with care so as to prevent
foreign bodies getting into the evaporator.
Page 13 of 54
Downloaded from www.Manualslib.com manuals search engine 61A-11
HEATING
Recirculation control cable: Removal - Refitting
AIR CONDITIONING or STANDARD HEATING RECIRCULATION
61A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aLock the airbag computer (see Fault finding - Re-
placement of components) (88C, Airbags and pre-
tensioners).
aDisconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
aRemove:
-the driver's front airbag (see Driver's frontal air-
bag: Removal - Refitting) (88C, Airbags and pre-
tensioners),
-the steering wheel (see Steering wheel: Removal
- Refitting) (36A, Steering assembly),
-the steering column switch assembly (see Steer-
ing column switch assembly: Removal - Refit-
ting) (84A, Control - Signals),
-the instrument panel (see Instrument panel: Re-
moval - Refitting) (83A, Instrument panel)
-the storage compartment,
-the radio (see Radio: Removal - Refitting) (86A,
Radio),
-the dashboard (see Dashboard: Removal - Refit-
ting) (57A, Interior equipment).
aTurn the air recirculation switch to the air recircula-
tion position.
aDisconnect the air conditioning control panel con-
nector.II - REMOVAL OPERATION
aRemove the sheath stop by moving the tab (3) to
one side.
aExtract the recirculation control cable (4) from the
control panel. H79
125537
Page 14 of 54
Downloaded from www.Manualslib.com manuals search engine 61A-12
HEATING
Recirculation control cable: Removal - Refitting
AIR CONDITIONING or STANDARD HEATING RECIRCULATION
61A
aUnclip the cable sleeve stop (5) from the distribution
unit.
aExtract the end of the air recirculation control cable
(6) .
aRemove the air recirculation control cable.
REFITTING
aProceed in the reverse order to removal.
aCheck that the air recirculation flap is in the recircu-
lation position.
aCheck that the recirculation control can move along
its whole stroke.
aUnlock the airbag computer (see Fault finding - Re-
placement of components) (88C, Airbags and pre-
tensioners).
121597
Page 15 of 54
Downloaded from www.Manualslib.com manuals search engine 61A-13
HEATING
Air distribution cable: Removal - Refitting
AIR CONDITIONING or STANDARD HEATING RECIRCULATION
61A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aLock the airbag computer (see Fault finding - Re-
placement of components) (88C, Airbags and pre-
tensioners).
aDisconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
aTurn the air distribution control to the air vent posi-
tion on the dashboard,
aRemove:
-the driver's front airbag (see Driver's frontal air-
bag: Removal - Refitting) (88C, Airbags and pre-
tensioners),
-the steering wheel (see Steering wheel: Removal
- Refitting) (36A, Steering assembly),
-the steering column switch assembly (see Steer-
ing column switch assembly: Removal - Refit-
ting) (84A, Control - Signals),
-the instrument panel (see Instrument panel: Re-
moval - Refitting) (83A, Instrument panel),
-the storage compartment,
-the radio (see Radio: Removal - Refitting) (86A,
Radio),
-the dashboard (see Dashboard: Removal - Refit-
ting) (57A, Interior equipment).
aDisconnect the climate control panel connector .II - REMOVAL OPERATION
aRemove the sheath stop by moving the tab (3) to
one side.
aExtract the air distribution cable (4) from the air con-
ditioning control panel. H79
125537
Page 16 of 54
Downloaded from www.Manualslib.com manuals search engine 61A-14
HEATING
Air distribution cable: Removal - Refitting
AIR CONDITIONING or STANDARD HEATING RECIRCULATION
61A
aUnclip the cable sleeve stop (5) from the distribution
unit.
aExtract the end of the air distribution cable (6) .
aRemove the air distribution cable.
REFITTING
aProceed in the reverse order to removal.
aCheck that the air distribution control can move
along its whole stroke.
aUnlock the airbag computer (see Fault finding - Re-
placement of components) (88C, Airbags and pre-
tensioners). LEFT-HAND DRIVE
108093
Page 17 of 54
Downloaded from www.Manualslib.com manuals search engine 61A-15
HEATING
Air mixing cable: Removal - Refitting
AIR CONDITIONING or STANDARD HEATING RECIRCULATION
61A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aLock the airbag computer (see Fault finding - Re-
placement of components) (88C, Airbags and pre-
tensioners).
aDisconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
aTurn the heating and air conditioning mixing control
to the hottest position.
aRemove:
-the driver's front airbag (see Driver's frontal air-
bag: Removal - Refitting) (88C, Airbags and pre-
tensioners),
-the steering wheel (see Steering wheel: Removal
- Refitting) (36A, Steering assembly),
-the steering column switch assembly (see Steer-
ing column switch assembly: Removal - Refit-
ting) (84A, Control - Signals),
-the instrument panel (see Instrument panel: Re-
moval - Refitting) (83A, Instrument panel),
-the storage compartment,
-the radio (see Radio: Removal - Refitting) (86A,
Radio),
-the dashboard (see Dashboard: Removal - Refit-
ting) (57A, Interior equipment).
aDisconnect the climate control panel connector .II - REMOVAL OPERATION
aRemove:
-the sheath stop by moving the tab (3) to one side,
-the air mixing cable (4) from the control panel.
aUnclip the distribution unit cable sleeve stop (5) .
aExtract the end of the air mixing cable (6) . H79
125537
145422
Page 18 of 54
Downloaded from www.Manualslib.com manuals search engine 61A-16
HEATING
Air mixing cable: Removal - Refitting
AIR CONDITIONING or STANDARD HEATING RECIRCULATION
61A
aRemove the air mixing cable.
REFITTING
aProceed in the reverse order to removal.
aCheck that the air mixing control can move along its
whole stroke.
aUnlock the airbag computer (see Fault finding - Re-
placement of components) (88C, Airbags and pre-
tensioners).