brake pads DACIA LODGY 2013 1.G Owners Manual
[x] Cancel search | Manufacturer: DACIA, Model Year: 2013, Model line: LODGY, Model: DACIA LODGY 2013 1.GPages: 258, PDF Size: 16.44 MB
Page 235 of 258
Downloaded from www.Manualslib.com manuals search engine 4.5 replacement of parts due to wear and tear resulting from use of the vehicle or from its mileage including but not
limited to clutch, shocker absorbers, wiper blades, brake drum, brake disk, brake pads, brake shoe, lamp, plugs,
belts, linings, bulbs, fuses, parts made of rubber, etc.
4.6 damage or failure resulting due to the following causes:
4.6.1 poor vehicle maintenance, in particular if the instructions for the treatment, the frequency of maintenance
or care to be applied to the vehicle set out in the Maintenance Service Booklet and the Driver’s Handbook
have not been observed;
4.6.2 due to lack of use / operation of vehicle over prolonged period[s];
4.6.3 misuse, abuse, negligence, improper driving habits, theft etc. of the vehicle;
4.6.4 damage from stress, like use of vehicles in races, rallies or as taxis.
4.6.5 use of parts other than Renault Genuine Parts.
4.6.6 any device and/or accessories not supplied by RIPL.
4.6.7 modifications, alterations, tampering or improper repair.
4.6.8 parts used in applications of which they were not designed or not approved by RIPL.
4.6.9 slight irregularities not recognized as affecting quality or function of the vehicle or parts, such as slight noise
or vibrations, or items considered characteristic of the vehicle.
4.7 damage caused by the following external causes:
4.7.1 accidents, impacts, scratches, scoring, projection of gravel or solid bodies, hail, acts of vandalism;
4.7.2 failure to observe the Manufacturer recommendations;
4.7.3 deposits due to atmospheric pollution, plant-based deposits such as resin, animal-based deposits such as
bird droppings, chemical deposits;
4.7.4 transportation of the vehicle;
4.7.5 using an adulterated/ incorrect fuel;
4.7.6 fitting accessories not approved by the Manufacturer;
4.7.7 fitting accessories approved by the Manufacturer, but installed without observing the recommendations
defined by the Manufacturer;