belt DACIA LODGY 2015 Owner's Manual

JauneNoir Noir texte
1.32
ENG_UD34878_3
Sécurité enfants : installation du siège enfant (X92 - Renault\
)
ENG_NU_975-6_X92_Dacia_1
CHILD SAFETY: fitting a child seat (5/8)
³ Check the status of the air bag
before fitting a child seat or allowing a
passenger to use the seat.
² Seat not suitable for fitting child
seats.
Child seat attached using the belt
¬ Seat which allows a child seat
with “Universal” approval to be attached
by a seat belt.
RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child
seat on the front passenger seat, check that the airbag has been deac-
tivated (please refer to the information on “Child safety: front pas\
senger
airbag deactivation, activation” in Section 1).
Using a child safety system
which is not approved for
this vehicle will not correctly
protect the baby or child.
They risk serious or even fatal injury.
Child seat attached using the ISOFIX
fitting
ü Seat which allows an ISOFIX
child seat to be attached.
 The rear seats are fitted with an
anchorage point which allows a for-
ward-facing ISOFIX child seat with uni-
versal approval to be attached. The
anchorage points are located on the
bench seat and are visible.
The size of the ISOFIX child seat is in-
dicated by a letter:
– A, B and B1: for forward-facing seats in group 1 (9 to 18 kg);
– C: rear-facing seats in group 1 (9 to 18 kg);
– D and E: shell seat or rear-facing seats in group 0 or 0+ (less than
13 kg);
– F and G: cots in group 0 (less than 10 kg).
Visual installation of the five-seater version

JauneNoir Noir texte
1.33
ENG_UD34878_3
Sécurité enfants : installation du siège enfant (X92 - Renault\
)
ENG_NU_975-6_X92_Dacia_1
Child seat attached using the belt
¬ Seat which allows a child seat
with “Universal” approval to be attached
by a seat belt.³ Check the status of the air bag
before fitting a child seat or allowing a
passenger to use the seat.
² Seat not suitable for fitting child
seats.
CHILD SAFETY: fitting a child seat (6/8)
RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child
seat on the front passenger seat, check that the airbag has been deac-
tivated (please refer to the information on “Child safety: front pas\
senger
airbag deactivation, activation” in Section 1).
Child seat attached using the ISOFIX
fitting
ü Seat which allows an ISOFIX
child seat to be attached.
 The rear seats are fitted with an
anchorage point which allows a for-
ward-facing ISOFIX child seat with uni-
versal approval to be attached. The
anchorage points are located on the
bench seat and are visible.
The size of the ISOFIX child seat is in-
dicated by a letter:
– A, B and B1: for forward-facing seats in group 1 (9 to 18 kg);
– C: rear-facing seats in group 1 (9 to 18 kg);
– D and E: shell seat or rear-facing seats in group 0 or 0+ (less than
13 kg);
– F and G: cots in group 0 (less than 10 kg).
Visual installation, 7-seater version

JauneNoir Noir texte
1.35
ENG_UD34878_3
Sécurité enfants : installation du siège enfant (X92 - Renault\
)
ENG_NU_975-6_X92_Dacia_1
CHILD SAFETY: fitting a child seat (8/8)
X = Seat not suitable for fitting child seats.
U = Seat allowing a child seat with “Universal” approval to be attache\
d by seat belt; check that it can be fitted correctly.
IUF = Seat which allows a forward-facing child seat with “Universal” approval to be attached by the ISOFIX device; check that it can be fitted.
IL = Seat which allows child seats with “Semi-universal” or “Vehicle specific” approval to be attached by the ISOFIX device; chec k
that it can be fitted.
(3) Only a rear-facing child seat can be fitted in this seat: raise the seat\
to the maximum and position it as far back as possible ,
tilting the seatback slightly (approximately 25°).
(4) A carrycot can be installed across the vehicle and will take up at least \
two seats. Position the child with his or her feet nea rest
the door.
(5) Move the front seat as far forward as possible to install a rear-facing \
child seat, then move back the seat in front as far as it will
go, although without allowing it to come into contact with the child sea\
t. Raise the headrest or remove it.
(6) Forward-facing child seat; position the seatback of the child seat in co\
ntact with the seatback of the vehicle seat. Adjust the
height of the headrest or remove it if necessary; do not push the seat in front of the child more than halfway back on its runn ers
and do not recline the seatback more than 25°.
Refer to the “Child safety equipment” booklet available from the network to choose \
the seat suited to your child and rec-
ommended for your vehicle.

1.36
ENG_UD28687_2
Sécurité enfants : désactivation/activation airbag passager ava\
nt (X92 - Renault)
ENG_NU_975-6_X92_Dacia_1
CHILD SAFETY: deactivating/activating the front passenger air bag (1/3)
The passenger air bag must
be activated or deactivated
with the ignition off .
If handled when the igni-
tion is on, the warning light
å
comes on.
Switch the ignition off then on again
to reset the air bag in accordance
with the lock.
With the ignition on, it is essential to
check that the 2
] warning light is
lit up.
This warning light remains continu-
ously lit to let you know that you can
fit a child seat .
Deactivating the front
passenger air bags
(depending on vehicle)
In order to be able to install a rear-
facing child seat on the front passen-
ger seat, you must deactivate the front
passenger seat belt additional restraint
systems.
To deactivate the passenger airbag,
with the ignition off , press and turn
button 1 to the OFF position.
2
1

JauneNoir Noir texte
1.45
ENG_UD34835_3
Tableau de bord : témoins lumineux (X92 - Renault)
ENG_NU_975-6_X92_Dacia_1
™Seat belt reminder light
It is displayed on the con-
sole B.
It stays on when the engine is started if
the driver and/or passenger seat belt is
not fastened. When the vehicle is being
driven, it comes on and a beep sounds
for approximately 2 minutes until the
driver’s seat belt is fastened.
]Front passenger air bag de-
activated warning light
Refer to the information on “Child
safety: deactivating, activating the front
passenger airbag".
Electronic Stability Program
(ESP) and traction control
system (ASR) activation warning
light
There are several reasons for the warn-
ing light to come on: please refer to the
information on the “Electronic stability
program (ESP) with understeer control
and traction control (ASR)” in Section 2.
2 Door(s) open warning light
Refer to “Opening/closing the doors” in
Section 1.
ECO mode warning light

This comes on when ECO mode is ac-
tivated.
Please refer to the information on
“Driving advice, Eco-driving” in
Section 2.
The presence and operation of the warning lights DEPEND ON THE EQUIPMENT\
AND COUNTRY.
WARNING LIGHTS (4/4)
ϦCruise control warning
lights
Refer to the information on “Cruise con-
trol” in Section 2.
ÐSpeed limiter warning light
Refer to the information on
“Speed limiter” in Section 2.
^Water in the diesel filter
warning light
This lights up when the ignition is
switched on and goes out after a few
seconds.
If it comes on when driving, it indicates
the presence of water in the diesel.
Contact your approved Dealer as soon
as possible.
Traction control system
(ASR) deactivation warning
light
Please refer to information on “Driver
correction devices and aids” in
Section 2.
B

JauneNoir Noir texte
3.19
ENG_UD26885_2
Sièges arrière de deuxième rangée: fonctionnalité (X92 -\
Renault)
ENG_NU_975-6_X92_Dacia_3
REAR SEAT FUNCTIONS: second row (1/3)
Fixed rear bench seat
To fold down the seatback
– Bring the front seats forward;
– insert the rear seatbelt buckle in housing 1;
– Lower door handle 2;
– lower the seatback onto the seat base;
– adjust the front seats. To reposition the seatback
– Raise the seatbacks;
– make sure you lock the seat back in
place.
When moving the rear
seats, check that the an-
choring points are clean
(they must be free from grit,
cloths, toys, etc.)
Check that the rear seat
belts are positioned and
operating correctly each
time the rear bench seat is
moved.
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.
2
1

JauneNoir Noir texte
3.20
ENG_UD26885_2
Sièges arrière de deuxième rangée: fonctionnalité (X92 -\
Renault)
ENG_NU_975-6_X92_Dacia_3
Rear bench seat with folding
seat back and seat cushion
To fold down the seat A or bench
seat B
– Bring the front seats forward;
– insert the rear seatbelt buckle in housing 1;
– lower the headrests (refer to the in- formation on the “Rear headrests” in
Section 3);
– lower handle 2;
– lower the seatback onto the seat base;
– raise the seat until vertical;
– adjust the front seats, making sure they are properly locked in place. To reposition the seat
A or bench
seat B
– Lower the bench seat until it locks in position;
– Fold the seatbacks up again;
– make sure that the seat bases and seatbacks lock into position cor-
rectly.When moving the rear
seats, check that the an-
choring points are clean
(they must be free from grit,
cloths, toys, etc.)
Check that the rear seat
belts are positioned and
operating correctly each
time the rear bench seat is
moved.
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.
2
A
B
REAR SEAT FUNCTIONS: second row (2/3)
A
B
1

JauneNoir Noir texte
3.21
ENG_UD26885_2
Sièges arrière de deuxième rangée: fonctionnalité (X92 -\
Renault)
ENG_NU_975-6_X92_Dacia_3
REAR SEAT FUNCTIONS: second row (3/3)
Accessing the third row rear
seats
– Lower handle 2;
– lower the seatback onto the seat base;
– raise the seat until vertical.
To put the seat back into its initial po-
sition, perform the same procedure in
reverse.Restriction of use
If a passenger is occupying one of
the second row seats, do not drive
with the other second row seat
folded down.
Make sure that the seat-
back is correctly locked. If
necessary, remove any ob-
stacles behind the seats.
Repeat the above until the seat is
locked correctly.To avoid all risk of injury,
ensure that nobody is close
to the moving parts.
2
When refitting the seat-
back, make sure it is cor-
rectly locked in place.
If seat covers are fitted ,
make sure these do not prevent the
seatback latch from locking in.
Make sure that the seat belts are
positioned correctly.
Reposition the headrests.

JauneNoir Noir texte
3.22
ENG_UD34862_4
Sièges arrière de troisième rangée: fonctionnalité (X92 \
- Renault)
ENG_NU_975-6_X92_Dacia_3
REAR SEAT FUNCTIONS: third row (1/3)
The third row rear seats can be folded
down or removed for transporting bulky
objects.To fold down the seats
– Ensure that the rear seat belts are
correctly positioned on the hooks 1;
– lower the headrests (refer to the in- formation on the “Rear headrests” in
Section 3);
– unlock controls 2, press on the
middle of the seat backs and lower
the seatbacks onto the base;
– pull the strap 3 to release the bench
seat and lift the seat base until it is
vertical.
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.
Check that the rear seat
belts are positioned and
operating correctly each
time the rear bench seat is
moved.
1
Ensure that the strap 3 is securely
fixed in its meal ring 4 . Risk of
damage.
3
2
3
4

JauneNoir Noir texte
3.23
ENG_UD34862_4
Sièges arrière de troisième rangée: fonctionnalité (X92 \
- Renault)
ENG_NU_975-6_X92_Dacia_3
REAR SEAT FUNCTIONS: third row (2/3)
To reposition the seats
– Ensure that the rear seat belts are correctly positioned on the hooks 1;
– Lower the seat base until it locks in position;
– unlock the controls 2 while pressing
on the top of the seat back and raise
the seat backs using the straps 5;
– Make sure that the seat base and seatbacks lock into position cor-
rectly.
When moving the rear
seats, check that the an-
choring points are clean
(they must be free from grit,
cloths, toys, etc.)
Check that the rear seat
belts are positioned and op-
erating correctly each time
the rear seat is moved.
2
11
No person or animal should
be on the third row rear
seats if the luggage com-
partment cover is not re-
moved.
Restriction of use
If a passenger is one one of the third
row seats, do not drive with one of
the seat backs or a second row seat
folded down.
5