belt DACIA LOGAN 2022 Owner's Manual
[x] Cancel search | Manufacturer: DACIA, Model Year: 2022, Model line: LOGAN, Model: DACIA LOGAN 2022Pages: 238, PDF Size: 3.19 MB
Page 38 of 238

Downloaded from www.Manualslib.com manuals search engine JauneNoir Noir texte
1.32
ENG_UD33184_5
Sécurité enfants : installation du siège enfant (X52 - Dacia)\
ENG_NU_993-5_X52_Dacia_1
CHILD SAFETY: fitting a child seat (1/7)
In the front seat
The laws concerning children travel-
ling in the front passenger seat differ in
every country. Consult the legislation in
force and follow the indications on the
diagram on the following page.
Before fitting a child seat in this seat (if
authorised):
– deactivate the front passenger air
bag;
– lower the seat belt as far as possible;
– move the seat as far back as possi- ble;
– gently tilt the seatback away from vertical (approximately 25°);
– on equipped vehicles, raise the seat base as far as possible.
In all situations, reinsert the headrest to
its full extent so that it does not interfere
with the child seat (see the information
on “Front headrests” in Section 1);
RISK OF DEATH OR
SERIOUS INJURY: Before
installing a child seat on
this seat, check that the
airbag has been deactivated (refer
to “Front passenger airbag deacti-
vation” in Section 1).
Some seats are not suitable for fitting
child seats. The diagram on the follow-
ing page shows you how to attach a
child seat.
The types of child seats indicated may
not be available. Before using a differ-
ent child seat, check with the manufac-
turer that it can be fitted.
Fit the child seat in a rear
seat wherever possible.
Check that when installing
the child seat in the vehicle
it is not at risk of coming loose from
its base.
If you have to remove the headrest,
check that it is correctly stored so
that it does not come loose under
harsh braking or impact.
Always attach the child seat to the
vehicle even if it is not in use so that
it does not come loose under harsh
braking or impact.
After installing the child seat, if neces-
sary, the seat may be advanced (so as
to leave enough space in the rear seats
for passengers or other child seats).
For a rear-facing child seat, do not let
it touch the dashboard or move it to the
furthest forward position.
Do not change other settings after in-
stalling the child seat.
Page 39 of 238

Downloaded from www.Manualslib.com manuals search engine JauneNoir Noir texte
1.33
ENG_UD33184_5
Sécurité enfants : installation du siège enfant (X52 - Dacia)\
ENG_NU_993-5_X52_Dacia_1
CHILD SAFETY: fitting a child seat (2/7)
In the rear side seat
A carrycot can be installed across the
vehicle and will take up at least two
seats. Position the child with his or her
feet nearest the door.
Before fitting a child seat to the ISOFIX
anchorages on the rear side seat,
ensure that the seat belt buckles are
not positioned between the two ISOFIX
anchorages on this seat. If necessary,
move the buckle from the seat in ques-
tion towards the centre of the vehicle.
Move the front seat as far forward as
possible to install a rear-facing child
seat, then move back the seat in front
as far as it will go, although without al-
lowing it to come into contact with the
child seat.
For the safety of the child in the for-
ward-facing seat, do not move the seat
in front back past the middle of the
runner, do not tilt the seatback too far
(maximum of 25° ) and raise the seat as
much as possible.
Check that the forward-facing child seat
is resting against the back of the vehi-
cle seat. Adjust the headrest, or remove
it if necessary. Rear centre seat
A child seat may only be fitted in this
seat if it is equipped with an inertia-reel
seat belt. For any additional informa-
tion, contact an approved dealer.
Ensure that the child seat
or the child’s feet do not
prevent the front seat from
locking correctly.
Refer to the information on the
“Front seats” in Section 1.
Page 41 of 238

Downloaded from www.Manualslib.com manuals search engine JauneNoir Noir texte
1.35
ENG_UD33184_5
Sécurité enfants : installation du siège enfant (X52 - Dacia)\
ENG_NU_993-5_X52_Dacia_1
CHILD SAFETY: fitting a child seat (4/7)
X = Seat not suitable for fitting child seats.
U = Seat which allows a child seat with “Universal” approval to be ins\
talled using a seat belt; check that it can be fitted.
IUF = Seat which allows forward facing child seats with “Universal” appr\
oval to be attached by the ISOFIX device; check that it
can be fitted correctly.
IL = Seat which allows child seats with “Semi-universal” or “vehicle specific” approval to be attached by the ISOFIX device; check
that it can be fitted correctly.
(3) Raise the seat to the maximum and position it as far back as possible, t\
ilting the seatback slightly (approximately 25°).
(4) A carrycot can be installed across the vehicle and will take up at least \
two seats. Place the child with its feet nearest the door.
(5) Move the front seat as far forward as possible to install a rear-facing \
child seat, then move back the seat in front as far as it will
go, although without allowing it to come into contact with the child sea\
t. Put the headrest in the raised position.
(6) Forward-facing child seat; position the seatback of the child seat in co\
ntact with the seatback of the vehicle seat. Adjust the
height of the headrest or remove it if necessary; do not push the seat in front of the child more than halfway back on its runn ers
and do not recline the seatback more than 25°.
Refer to the “Child safety equipment” booklet available from the network to choose \
the seat suited to your child and rec-
ommended for your vehicle.
Page 42 of 238

Downloaded from www.Manualslib.com manuals search engine JauneNoir Noir texte
1.36
ENG_UD33184_5
Sécurité enfants : installation du siège enfant (X52 - Dacia)\
ENG_NU_993-5_X52_Dacia_1
Child seat attached using the ISOFIX
fitting
ü Seat which allows an ISOFIX
child seat to be attached.
The rear side seats are equipped
with an anchorage point allowing a
forward-facing ISOFIX child seat with
“Universal” approval to be attached.
The anchorage points
are located
in the boot and are visible.
The size of the ISOFIX child seat is in-
dicated by a letter:
– A, B and B1: for forward-facing seats in group 1 (9 to 18 kg);
– C: rear-facing seats in group 1 (9 to 18 kg);
– D and E: shell seat or rear-facing seats in group 0 or 0+ (less than
13 kg);
– F and G: cots in group 0 (less than 10 kg).
CHILD SAFETY: fitting a child seat (5/7)
³ Check the status of the air bag
before fitting a child seat or allowing a
passenger to use the seat.
² Seat not suitable for fitting child
seats.
Child seat attached using the belt
¬ Seat which allows a child seat
with “Universal” approval to be attached
by a seat belt.
− Seat which only allows a rear-
facing seat with “Universal” approval
to be attached with a seat belt.
Only if the seat is equipped with an
inertia-reel belt.
RISK OF DEATH OR SERIOUS INJURY: Before fitting a child seat on
the front passenger seat, check that the airbag has been deactivated
(please refer to “Child safety: front passenger airbag deactivation,\
activa-
tion” in Section 1).
Using a child safety system
which is not approved for
this vehicle will not correctly
protect the baby or child.
They risk serious or even fatal injury.
Visual installation of the five-door version
1
1
Page 43 of 238

Downloaded from www.Manualslib.com manuals search engine JauneNoir Noir texte
1.37
ENG_UD33184_5
Sécurité enfants : installation du siège enfant (X52 - Dacia)\
ENG_NU_993-5_X52_Dacia_1
³ Check the status of the air bag
before fitting a child seat or allowing a
passenger to use the seat.
² Seat not suitable for fitting child
seats. Child seat attached using the belt
¬ Seat which allows a child seat
with “Universal” approval to be attached
by a seat belt.
− Seat which only allows a rear-
facing seat with “Universal” approval
to be attached with a seat belt.
Only if the seat is equipped with an
inertia-reel belt.
RISK OF DEATH OR SERIOUS INJURY: Before fitting a child seat on
the front passenger seat, check that the airbag has been deactivated
(please refer to “Child safety: front passenger airbag deactivation,\
activa-
tion” in Section 1).
Child seat attached using the ISOFIX
fitting
ü Seat which allows an ISOFIX
child seat to be attached.
The rear side seats are equipped
with an anchorage point allowing a
forward-facing ISOFIX child seat with
“Universal” approval to be attached.
The anchorage points
are located
in the boot and are visible.
The size of the ISOFIX child seat is in-
dicated by a letter:
– A, B and B1: for forward-facing seats in group 1 (9 to 18 kg);
– C: rear-facing seats in group 1 (9 to 18 kg);
– D and E: shell seat or rear-facing seats in group 0 or 0+ (less than
13 kg);
– F and G: cots in group 0 (less than 10 kg).
Using a child safety system
which is not approved for
this vehicle will not correctly
protect the baby or child.
They risk serious or even fatal injury.
Estate version diagram CHILD SAFETY: fitting a child seat
(6/7)
1
1
Page 44 of 238

Downloaded from www.Manualslib.com manuals search engine JauneNoir Noir texte
1.38
ENG_UD33184_5
Sécurité enfants : installation du siège enfant (X52 - Dacia)\
ENG_NU_993-5_X52_Dacia_1
Child seat attached using the belt
¬ Seat which allows a child seat
with “Universal” approval to be attached
by a seat belt.
− Seat which only allows a rear-
facing seat with “Universal” approval
to be attached with a seat belt.
Only if the seat is equipped with an
inertia-reel belt.
³ Check the status of the air bag
before fitting a child seat or allowing a
passenger to use the seat.
² Seat not suitable for fitting child
seats.
CHILD SAFETY: fitting a child seat (7/7)
RISK OF DEATH OR SERIOUS INJURY: Before fitting a child seat on
the front passenger seat, check that the airbag has been deactivated
(please refer to “Child safety: front passenger airbag deactivation,\
activa-
tion” in Section 1).
Child seat attached using the ISOFIX
fitting
ü Seat which allows an ISOFIX
child seat to be attached.
The rear side seats are equipped
with an anchorage point allowing a
forward-facing ISOFIX child seat with
“Universal” approval to be attached.
The anchorage points
are located
on the rear parcel shelf, under a guard.
The size of the ISOFIX child seat is in-
dicated by a letter:
– A, B and B1: for forward-facing seats in group 1 (9 to 18 kg);
– C: rear-facing seats in group 1 (9 to 18 kg);
– D and E: shell seat or rear-facing seats in group 0 or 0+ (less than
13 kg);
– F and G: cots in group 0 (less than 10 kg).
Visual installation of the four-door version
Using a child safety system
which is not approved for
this vehicle will not correctly
protect the baby or child.
They risk serious or even fatal injury.
1
1
Page 45 of 238

Downloaded from www.Manualslib.com manuals search engine 1.39
ENG_UD26921_1
Sécurité enfants : désactivation/activation airbag passager ava\
nt (X52 - Dacia)
ENG_NU_993-5_X52_Dacia_1
CHILD SAFETY: deactivating/activating the front passenger air bag (1/3)
The passenger air bag must
only be deactivated or acti-
vated when the vehicle is
stationary.
If handled when the ignition is on,
the warning light
å comes on.
Switch the ignition off then on again
to reset the air bag in accordance
with the lock.
With the ignition on, it is essential to
check that the 2
] warning light is
lit up.
This warning light remains continu-
ously lit to let you know that you can
fit a child seat .
Deactivating the front
passenger air bags
(depending on vehicle)
In order to be able to install a rear-
facing child seat on the front passen-
ger seat, you must deactivate the front
passenger seat belt additional restraint
systems.
To deactivate the passenger airbag,
with the ignition off , press and turn
button 1 to the OFF position.
2
1
Page 55 of 238

Downloaded from www.Manualslib.com manuals search engine JauneNoir Noir texte
1.49
ENG_UD34759_3
Tableau de bord : témoins lumineux (X52 - Dacia)
ENG_NU_993-5_X52_Dacia_1
™Seat belt reminder light
Displayed on the dashboard B.
It comes on when the engine is started
if the driver and/or passenger seat belt
is not fastened (depending on the vehi-
cle). When the vehicle is being driven,
it comes on and a beep sounds for ap-
proximately 2 minutes until the driver’s
seat belt is fastened.
Not used
Electronic Stability Program
(ESP) and traction control
system (ASR) activation warning
light
There are several reasons for the warn-
ing light to come on: please refer to the
information on the “Electronic stability
program (ESP) with understeer control
and traction control (ASR)” in Section 2.
2 Door(s) open warning light
Refer to “Opening/closing the doors” in
Section 1.
ECO mode warning light
This comes on when ECO mode is ac-
tivated.
Please refer to the information on
“Driving advice, Eco-driving” in
Section 2.
ϦCruise control warning
lights
Refer to the information on “Cruise con-
trol” in Section 2.
The presence and operation of the warning lights DEPEND ON THE EQUIPMENT\
AND COUNTRY.
WARNING LIGHTS (4/4)
ÐSpeed limiter warning light
Refer to the information on
“Speed limiter” in Section 2.
^Water in the diesel filter
warning light
This lights up when the ignition is
switched on and goes out after a few
seconds.
If it comes on when driving, it indicates
the presence of water in the diesel.
Contact your approved Dealer as soon
as possible.
]Front passenger air bag de-
activated warning light
Refer to the information on “Child
safety: deactivating, activating the front
passenger airbag".
Tyre pressure loss warning
Please refer to the information
on the “Tyre pressure loss warning” in
Section 2.
A
B
Page 136 of 238

Downloaded from www.Manualslib.com manuals search engine JauneNoir Noir texte
3.24
ENG_UD32482_1
Banquette arrière (X52 - Dacia)
ENG_NU_993-5_X52_Dacia_3
To reposition the seat back B
or C
– Lift the seat back;
– make sure you lock the seat back in
place.
To reposition the seat base A
To refit the seat base, proceed in the
reverse order to removal. Ensure that
the seat base is correctly secured.
REAR BENCH SEAT: functions (1/2)
Depending on the vehicle, the seat and
the seatback may be folded away to
allow bulky objects to be carried.
To fold away the seat base
Tilt seat base A against the front seats.
To fold the back B or C
– Insert the seat belt buckle of the rear
seat in its housing 1;
– remove or fully lower the headrests (please see the information on “Rear
headrests” in Section 3);
– depending on the vehicle, press button 2 or lift the pull switch 3;
– lower the seat back.
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.Allow the bench seat to turn on its
axis naturally without forcing it, gui-
ding it as it lowers onto the floor.
AC
B
B1
C
23
Page 137 of 238

Downloaded from www.Manualslib.com manuals search engine JauneNoir Noir texte
3.25
ENG_UD32482_1
Banquette arrière (X52 - Dacia)
ENG_NU_993-5_X52_Dacia_3
REAR BENCH SEAT: operation (2/2)
Check that the rear seat
belts are positioned and
operating correctly each
time the rear seat is moved.
When refitting the seat-
back, make sure it is cor-
rectly locked in place.
If seat covers are fitted ,
make sure these do not prevent the
seatback latch from locking in.
Make sure that the seat belts are
positioned correctly.
Reposition the headrests.
When moving the rear
bench seat, check that
the bench seat ancho-
rage points are clean (they
should be free from grit, cloths or
any other item which may prevent
the bench seat from locking secu-
rely).