overheating DACIA SANDERO 2013 2.G Owners Manual

wipers ....................................................................(current page)windscreen washer ................................................(current page)
1.50
ENG_UD7652_2Essuie-vitre/Lave-vitre/Dégivrage (B90 - L90 Ph2 - Dacia)ENG_NU_817-2_NU_Dacia_1
JauneNoirNoir texte
Wiper/Windscreen washer/De-icing
nw indscreen wiper
With the ignition on, move
stalk 1 around the steering wheel:
A
Park.
B
Intermittent wiping.

The wipers will pause for several seconds between sweeps.
C
Normal wiping speed.
D
Fast wiping speed.
sw indscreen washer
Headlight washers(depending on vehicle)
With the ignition on, pull stalk
1 towards you.
Headlights off
The windscreen washer will be acti- vated.
Headlights on
Depending on the version, you will si- multaneously activate the headlight washers.
In frosty weather, make sure that the wiper blades are not stuck by ice (risk of motor overheating).
Keep an eye on the condition of the blades. Replace the wiper blades as soon as they begin to lose efficiency (approximately once a year).
Clean your windscreen regularly.
If you switch off the ignition before switching off the windscreen wiper
(position A) the blades will stop at random on the windscreen.
After switching the ignition back on,
simply move stalk 1 to position A to place them in the park position.
Before any action on the windscreen (washing the vehicle, de-icing, cleaning the windscreen, etc.) return
stalk 1 to position A (park).
Risk of injury and/or damage.When working in the engine compartment, ensure that the windscreen wiper stalk is in position A (park). Risk of injury.
1
A
B
C
D1
wINDSCREEN w ASHER/wIPER

wiper blades .........................................(up to the end of the DU)practical advice .....................................(up to the end of the DU)wipersblades .............................................(up to the end of the DU)
5.10
ENG_UD8569_2Balais d’essuie-vitre (B90 - Dacia)ENG_NU_817-2_NU_Dacia_5
Wiper blades
WIPER BLADES
Replacing windscreen wiper
blades
1
– Lift the wiper arm 3.
– Turn the wiper blade until it is hori
- zontal.
– Press tab
2 and slide the wiper blade
downwards to release hook 4 from the wiper arm.
– Slide the blade (
A) then lift it (B) to release it.
– Before using the rear wiper, check that no object being transported is ob- structing the travel of the blade.
– In frosty weather, make sure that
the wiper blades are not stuck by ice (to avoid the risk of the motor overheating).
– Monitor the condition of the
blades. Replace the wiper blades as soon as they begin to lose ef- ficiency (approximately once a year).
– When changing the blade, when it
has been removed, do not let the wiper arm fall against the window:
risk of breaking the window.
– Do not lift the front wiper arms
beyond their stable position.
Clean the windscreen and rear screen regularly.
12
3
4B
A
Replacing the rear screen
wiper blades
6– Lift the wiper arm 5.
– Pivot blade 6 until some resistance is met.
– Pull the blade to release it (move-
ment C).
Refitting a front or rear wiper
blade
To refit the wiper blade, proceed in the reverse order to removal. Make sure that the blade is correctly locked in po- sition.
5
6
C