differential DACIA SOLENZA 2004 User Guide

CV JH3 - 05121
MECHANICAL GEARBOX
21 - 26
CRA
NKCASES ASSEMBLING
A
B
The assemb ling surfaces must be flat (small
imperfections can be eliminated by means of
a thin file). Place the axle and 1-2 fork, assembled,
on the 1-2 sliding collar of the secondary shaft.
The two shafts (primary a nd secondary)
are taken together with the fork and 1-2 axle
and positioned at the same time into the clutch
– differential crankcase.
The crown and the secondary shaft are
rotated until t he end of the secondary shaft
fits into the bearing.
Mount the blocking roll of the shaft ˚ (A).With the
1 – 2 axle in fre e position, the fol -
lowing are mounted:
-synchronizing assembly 3 – 4 together
w ith the a xle and t he 3 – 4 fork;
- mount the pin of the fork 3 – 4 by means
of the CV 949 device.
M ount the blocking roll of the 5 th gear axle
(B).
After that, mount the followin gs:
- the control axle for the 5 –th gear and
reverse driving (A);
- the axle and the reverse driving pinion
assembly (B), by easy lifting the primary shaft.
Gearbox dismounting
vnx.su