headlight bulb DACIA SOLENZA 2004 Repair Manual
[x] Cancel search | Manufacturer: DACIA, Model Year: 2004, Model line: SOLENZA, Model: DACIA SOLENZA 2004Pages: 891, PDF Size: 14.84 MB
Page 447 of 891
INSIDE ACCESSORIES
Dashboa rd .......................................................... 57-1
Inside rear view mirror ..................................... 57-8
S un visors ........................................................... 57-9
Central console ................................................. 57-10
Handbrake case ................................................ 57-11
Turning handle .................................................. 57-12
SECU RITY ELEMENTS
Fr ont safety belts ............................................... 59 - 1
Re ar safety belts ............................................... 59 - 2
HEATING
General .............................................................. 61-1
Operating principle ........................................... 61-2
C limate c ontrol unit .......................................... 61-4
Ve n t ilation- climate control air
distributor (RACV) .......................................... 61-5
Heating radiator ................................................ 61-6
C ontrol panel ..................................................... 61-7
C ontrol cable s ................................................... 61-9
Motor fan control resistance............................ 61-10
Diagnose ............................................................. 61-11
AIR CONDITIONING
General ............................................................... 62-1
Draining – filling the refrigerant circuit ......... 62-3
Air conditioning unit operating diagram ........ 62-4
Operating principle ........................................... 62-5
Part icles filter .................................................... 62-7
Cold ai r blowing device (DSAF) ...................... 62-8
Evaporator ........................................................ 62-10
Control panel ..................................................... 62-11
Comp ressor ........................................................ 62-12
C ondenser .......................................................... 62-13
Pressu re controller ............................................ 62-14
F ilter reser voir ................................................... 62-15
Unit piping ......................................................... 62-16
Thermostatic expansion valve ......................... 62-19
C limate c ontrol blower ..................................... 62-20
Blow er control resistance .................................. 62-21
Rec ycling flap motor fan ................................. 62-22
Diagnose ............................................................. 62-23
CARRIAGE BODY SEALING
Ca rriage body se aling ....................................... 64 - 1 OPENINGS SEALING
Opennings sealing ............................................. 65 - 1 GLASSES SEALING
Glasses gaskets .................................................. 66 - 1
Inside wipers ..................................................... 66 - 2
Outside wipers ................................................... 66 - 3
Fr ont door glass channel ................................. 66 - 4
Rear door gla ss run channel ............................ 66 - 5
CARRIAGE BODY INSIDE TRIMS
C arriage body inside trims ............................. 71-1
Upper front pillar trim ..................................... 71-2
Mi ddle pillar trim ............................................. 71-3
Rear quarter panel tr im ................................... 71-4
R oof lining ......................................................... 71-5
Trunk carpet ...................................................... 71-6
Cowl panel noise absor bent ............................. 71-7
Cockpit carpet ................................................... 71-8
LATERAL OPENINGS TRIMS
Fr ont door panel ................................................ 72-1
R ear door panel ................................................. 72-2
REAR TABLE
Lateral table ....................................................... 74-1 FRONT SEATS SLIDES GUIDES
Fr ont seat ........................................................... 75-1
Fr ont seats slides guide s ................................... 75-2
SEATS / R EAR BENCH
R ear bench ......................................................... 76-1
BATTERY - FRONT HEADLIGHTS
Battery ... ............................................................ 80-1
Headlamp assembly .......................................... 80-4
F og projectors ................................................... 80-5
Bulbs ... ................................................................ 80-6
Headlamps adjustment .................................... 80-9
Repl acement of the headlamps mechanic
adjustment control ........................................... 80-1157
Mechanisms and accesoires5
59
61
62
Climatisation6
64
65
66
71
72
74
75
76
80
Echuipment electr ique8
Garnishing and tack room7
vnx.su
Page 525 of 891
BATTERY - FRONT HEADLIGHTS
80
80 - 4
NOTE :
After headlamps dismounting, their adjustment must be performed.
DISMOUNTING
Disconnect the battery (-) plug.
Pull backwards the gasket of the headlamp adjustment cor rection control (1).
Dismount the headlamp adjustment correction control from the headlamp adjustment
device (see replacement of the headlamps mechanic adjustment control).
Disconnect the connector ( 2) of the headlamp bulb.
Disconnect the connector ( 3) of the turning light bulb.
Rotate and remove the holder ( 5) of the parking lamp bulb.
Dismount the front grill.
Dismount the 4 attachment screws TORX 20 (6) of the headlamp-turning lamp assembly .
Carefully remove the headlamp assembly from its place.
REMOU NT I NG
In point (6) placed at headlamp lower part, the closest to the turning bulb, introduce a TORX
20 screw.
Carefully introduce the headlamp assembly in its place, taking care that screw is not falling
down.
Mount this screw, by means of a TORX 20 screwdriver.
M ount the other three screws (6 ).
Mount the front grill.
Position the holder ( 5) in its place a nd rotate it, ensuring its good attachment.
Position the holder ( 4) in its place a nd rotate it, ensuring its good attachment.
Reconnect the turning bulb connector (3)
Reconnect the headlamp bulb connector ( 2).
Mount the headlamp adjustment control at the headlamp adjusting connector (see replacemen t
of the headlamps mechanic adjustment control).
Reconnect the battery (-) plug.
Check the operation of the bulbs of the headlamp-turning lamp assembly .
Headlamp assembly
6
6
6 6
5
4
3
1
2
vnx.su
Page 527 of 891
BATTERY - FRONT HEADLIGHTS
80
80 - 6
Bulbs
FOG PROJEC TOR B ULB RE PLACEMENT
DISMOUNTING
Suspend the vehicle on an elevator.
Disconnect the fog projector connector
Rotate the bulb holder ( F) an d extract it from its place.
REMOU NT I NG
Perform the dismounting operations in the reverse order, correctly positioning the bulb holder in
its place. Perform fog projector adjustment
NOTE :
Because the fog projector is equipped with a halogen bulb, do not touch the bulb glass
ba lloon directly by hand.
HEADLAMP BULB REPLACEMENT
DISMOUNTIN G
Disconnect the connector (2 ).
Remove the rubber protector ( 7). Mark its mounting position.
Release the atta chment clamp (8) and remove th e h e adlamp bulb
REMOU NT I NG
Perform the dismounting operations in the reverse order. Position correctly the rubber protector
( 7) observing the mounting position before dismounting. Perform headlamp adjustment.
NOTE :
Because the headlamp is equipped with a halogen bulb, do not touch the bulb glass balloon
d irectly by hand.
72 3 4
8
5
10
10
vnx.su
Page 528 of 891
80
BATTERY - FRONT HEADLIGHTS
80 - 7
FRONT TURNING BULB REPLACEMENT
DISMOUNTIN
G
Disconnect the connector ( 3).
Rotate the holder ( 4) and remove it.
Remove the worn bulb from the holder
R EMOU NT I NG
Perform the dismounting operations in the reverse order, with t he checking of the correct
holder (4 ) positioning to avoid dust and humidity penetration in the headlamp assembly .
The turning lamps are using orange color bulb; when replacing the bulb, use the same bulb
type.
FRONT PARKING BULB REPLACEMENT
DISMOUNTIN G
Rotate the holder ( 5) and remove it.
Extract the worn bulb from the holder.
R EMOU NT I NG
Perform the dismounting operations in the reverse order, with t he checking of the correct
holder (5 ) positioning to avoid dust and humidity penetration in the headlamp assembly .
Bulbs
vnx.su
Page 529 of 891
BATTERY - FRONT HEADLIGHTS
80
80 - 8
HEADLAMP-FRONT LAMP ASSEMBLY SEALING
(getting fogged, it has condensation water or water penetration)
The condensation water is not affecting the lighting quality.
No No
No
No
No Ye s
Ye s
Ye s Ye s
Bulbs
Check the front part of the assembly: direct
a water jet towards the headlamp glass.
Is the water penetrating inside the headlamp?
Is wa ter penetrating inside the parking-turning
lamp?
Visually check the headlamp rear part; rubber
protecto r of the headlamp bulb is correctly
mounted?
The he adlamp adju stment corrector is well
mounted?
The headla mp bulb is correctly mounted?
The aera tion holes are clogged?
The hea dl amp is steamed out or it has
condensa tion water inside?
Visually check the rear part of the parking-
turning lamp; t he parking bulb holder is
correc tly mounted?
Th e turning bulb holder is correctly mounted?
Replace the headlamp.
Replace the parking-turning lamp.
Mount corr ectly the rubber protector of the
h eadlamp bu lb. If this is not good, replace it.
Mount corr ectly the headlamp adjustment
co rrector and its rubber protector. If protector
is not good, replace it.
Mount correc tly the headlamp bulb.
If possible, eliminate the clogging cause. If
no t possible, replace the headlamp.
Explain th e client that this fact is a natural
one, no t a damage and there is no headlamp
corro sion risk. The condensation water will
disappear when the headlamp will be lighted;
the disappearing time of the condensation
wat er is subject to the environmental
humidity .
Mount co rrectly the parking bulb holder. If
its gasket is not good, replace it.
Mount co rrectly the turning bulb holder. If
its gasket is not good, replace it.
REMARK : If the client is i nsisting, proceed to headlamp drying:
- blow with dry air, if possible;
- naturally dry the headlamp by turning on the headlamps for couple of minutes
till condensation water elimination or headlamp defoggi ng. No
No
No
No Ye s
Ye s
Ye s
Ye s
vnx.su