trunk release DACIA SOLENZA 2004 Repair Manual

19
19 - 17
COOLING - EXHAUST - TANKFuel tank
DISMOUNTIN G
Drain the fuel tank ( 4)
Disconnect the battery.
Remove the trunk carpet.
Di smount the tank visiting cover from the
three attachment screws.
Di sconnect the e lectric connector f the fuel
pump assembly a nd detach from clips the
connection from the fuel supply pipe. Take out the spare wheel and release it
together with its support.
Remove the filling cap ( 2) and dismount the
two attachment screws of the upper filling cap.
Lift the vehicle on a two columns elevator.
Dismount the four-attachment screws (6) of
the fuel tank on the carriage body, then maintained
in tilted position, disconnect the rapid coupling
on the anti-overturning valve ( 7).
D etach from clips collar ( 3) of the aerating
pipe on the upper filling cap.
Release the fuel tank together with the aerating
connection. Dismount the thermal screen ( 5) off the three
maintaining clips. Dismount the attachment clip ( 1) of the filling
cap muff on the lower filling cap.
Dism ount t he fue l pum p a sse mbly by
dismounting the attachment nut by means of the
MOT 1397 device.
REMOUNTIN G
Perform the dismounting operatio ns in the
reverse order. The t ightening moment of t he fuel tank
attachment screws on the carriage body is of
2.1 daNm and the tightening moment for fuel
pump assembly attachment nut, is of minimal
7daNm .
REMARK :
Collar (1) is for single use only.
When remounting, use a new click collar
(1 ), for the attachmen t of the lower filling cap
connection on the fuel tank.
REMARK:
At remonting, for each 2 back screws
at t ac he ment fue l tank, ap l y 0.002 kg
FIXAMED M 28, for to realise security
moment.
vnx.su

19
19 - 22
COOLING - EXHAUST - TANK
Fuel pump
SPECIAL TOOLS
MOT 1397 Wrench for dismounting the fuel pump assembly nut
TIGHTENING MOMENTS (d aNm)
Fuel pump assembly nut 7
IMPORTANT
During the intervention on the fuel tank or on the
fuel supply circuit, it is absolutely necessary:
-n ot smoking and not bringing near any incan-
d escent parts in the working area;
-gu ard against possible petrol leakage, due to
residual pressure remained on piping, when
dis mounting.
DI SMO UNT I N G
In order to dismount the fuel pump assem bl y it is
not necess ary the tank dismounting, the access being
done t h rough the vehicle trunk.
In order to do that:
-d isconnect the battery;
-d ismount the attachment screws of the fuel
tan k v isiting cover;
-d isconnect the electric connector (B) of the
fuel pump assembly supply;
-d isconnect the rapid coupling (A) of t he fuel
supply pipe. Dismount the fuel pump assembly (2) attachment
nut (1), by means of the MOT 1397 device, after
1
2
p reviously marking on the fuel tank the position of
the arrow existing on the pump cap.
Release the fuel pump assem bl y.
REMOUNTI NG
Mount the fuel pump assem bl y on t he fuel tank
obs ervi ng the marking done when dismounting.
Mount the attachment nut of the fuel pump
assembly. Tighten the nut by means of the MOT 1397
device, so that the arrow from the nut meets the
arro w from the fuel pump assembly (this is ensuring
the minimal necessary tightening for sealing
achi ev ement.
REMARK :
After each dismounting, obligatory
replace the nut and its gasket.
The gasket will have the same color with the
dismounted one.
vnx.su