weight DACIA SUPERNOVA 2004 Repair Manual

SPECIFICATIONS
01
VEHICLE IDENTIFICATION
a.. Manufactu rer identification code;
b. Code of the vehicle;
c. Gearbox ty pe code;
d. Engine type code and driving location ( according to VIN code structure);
e. Vehicl e code;
f. Trailer ma ximum authorized weight without braking system;
g. Homologation number for the importer country;
h. VIS sign-one character for year model code + 7 characters for the chassis manufacturing number;
i. Maximum technical admissible weight of the loaded car;
j. Maximum admissible weight with trailer with braking system;
k. Maximum technical admissible weight on front axle;
l. Maximum technical admissible weight on rear axle.
LABEL T YPE OVAL PLATE
The se lf- adhesive label type oval plate is stuck on the right lateral side surface of the
dashboard. This enables the identification of the vehicle type and of its equipment, being exclusively
used fo r after-sale activity.
01 - 3
1,1
2,1 2,2
4,1 4,2
The reading of the codes marked on the oval plate type label
Caption:
Line 1
1.1 Cod type auto APV (after-sale):
B41A(E U 9 6 ) B41B(EU00) B41D(1 5 .04)
Line 2
2.1 Le vel of equipping: E0, E1, E2, E3
2.2 Options eq uipping code:
Line 4
4. 1 Technical definition code, driving place.
S2 : Left hand drive
4.2 Options equipment code: A: Normal suspension K: Without pre-filter
C : Temperate climate M: Steering mechanical system
E: Warm climate R: Without variable shock absorber
F : Normal heating T: Without plate corrector
G : Air conditioning V: Without wheels anti blocking (ABS)
B = represents body type
A ,B,D = represents engine type E7J, 1397 cmc, front wheel
drive type, mechanical gearbox.
Attention
Do not unstuck or damage the label from the lateral side surface of the dashboard. This
label represents the only way of vehicle identification needed to the after sale services, for a
period of 8 (eigh t) years from the purchasing date.
vnx.su

VALUES AND SETTINGS
07DIMENSIONS , WEIGHTS
07 - 1
DIMENSIONS (mm)
Total length (B) 4030
Total width (G) 1640
Total height (H) * em pty 1395
* with lifted hatchback (H1) 1940
Wheel base (A) 2475
Front wheel track width (E) 1410
Rear wheel track width (F) 1345
Ground clearance (K) * loaded 134
Hatchback free height (Q) 925
Turning radius * Between footways 4950
* Between walls 5000WEIGHTS (kg)
Unloaded vehicle weight: * on the front axle 545
* on th e rear axle 405
* total 950
Maxi mum authorized load
* on the front axle 715
* on th e rear axle 670
* total 1385
Authorized payload 425
Load w ith trailer with own brake 815
Load w ith trailer without own brake 450
vnx.su

WHEELS AND TYRES
35WHEELS BALANCING
BALANCING WEIGHTS
Use exclusively the weights delivered as spare parts:
- fixed by means of clamps on steel rims ( clamps included in weights)
- fixed by means of clamps (plate clamps ) for aluminum rims
A = steel balancing weights for steel rims
B = steel balancing weights for aluminum alloy rims.
35 - 4
A
B
vnx.su

80
BATTERY - FRONT HEADLIGHTS
80 - 8
HEADLAMPS ADJUSTMENT
FOG LAMPS ADJUSTMENT
The fog lamps adjustment is to be performed in the following conditions:
- the vehicle to be placed on a horizontal surface;
- the vehicle has not passengers inside the cockpit or weights in the trunk;
- the tires a re pressurized a t the manufacturer prescribed pressure.
Further on, proceed as follows:
Bring the vehicle at the working place.
Position the adjustment device (headlamp adjustment device – E) in front of an optical center
of a fog lamp.
Switch on the fog lamps.
Rotate the adjustment screw of the fog lamp (D), so that an adjustment of 2 % is obtained and
the separation between the lighted area and the dark one from the adjustment device is located
under the marked line (G).
This adjustment is performed in the same way as for the meeting lights adjustment.
Bring the adjustment device in front of the optical center of the second fog lamp.
Perform the fog lamp adjustment.
Switch off the fog lamps.
G
E
vnx.su