mirror DAEWOO MATIZ 2003 Service Owner's Manual

9L –16 GLASS AND MIRRORS
DAEWOO M-150 BL2
D109E529
OUTSIDE REARVIEW MIRROR
(ELECTRIC)
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the outside rearview mirror cover from the
outside rearview mirror.
D209B108
3. Remove the outside rearview mirror.

Remove the screws (1).

Disconnect the electrical connector (2).

Remove the outside rearview mirror (3).
D109E531
Installation Procedure
1. Connect the outside rearview mirror.
2. Install the outside rearview mirror with the screws.
3. Install the outside rearview mirror cover.
4. Connect the negative battery cable.

GLASS AND MIRRORS 9L–17
DAEWOO M-150 BL2
SPECIAL TOOLS AND EQUIPMENT
SPECIAL TOOLS TABLE
D109E102
J-24402
Glass Sealant Remover

9L –18 GLASS AND MIRRORS
DAEWOO M-150 BL2
SCHEMATIC AND ROUTING DIAGRAMS
REAR WINDOW DEFOGGER
D19E201B

9P –4 DOORS
DAEWOO M-150 BL2
1. Seal Trim
2. Lock Button
3. Trim Panel
4. Pocket Handle (Deluxe Type)
5. Pocket Handle Bracket (Deluxe Type)
6. Inside handle
7. Manual Regulator Handle
8. Pocket Handle (Standard Type)
9. Door Speaker Cover
10. Map Pocket
11. Contact Switch
12. Striker
13. Opening Weatherstrip
14. Door Weatherstrip
15. Glass Run
16. Front Door
17. Inside Channel Weatherstrip
18. Inside Handle Rod
19. Door Lock20. Door Lock Cylinder Rod
21. Lock Rod
22. Actuator Rod
23. Actuator
24. Window Regulator
25. Outside Channel Weatherstrip
26. Outside Handle Rod
27. Outside Handle
28. Division Bar
29. Quarter Glass
30. Quarter Glass Run
31. Door Hinge
32. Door Hold Open Link
33. Power Window Switch Cover
34. Mirror Switch
35. Power Window Switch Assembly
36. Mirror switch Blank
37. Door Side Molding

DOORS 9P–7
DAEWOO M-150 BL2
REPAIR INSTRUCTIONS
ON–VEHICLE SERVICE
D109E521
FRONT DOOR GLASS RUN
Removal Procedure
1. Remove the front door seal trim from the front door.
Refer to “Door Seal Trim” in this section.
2. Remove the outside rearview mirror from the front
door. Refer to Section 9L, Glass and Mirrors.
3. Remove the guide rail from the door.

Remove the screws (1).

Remove the inside bolts (2).

Remove the outside bolts (3).

Remove the division bar (4).
D109E522
4. Remove the glass run.
a. Glass run.
D109E526
Installation Procedure
1. Install the glass run.
2. Install the division bar with the bolts and the screws.
3. Install the outside rearview mirror. Refer to Section
9L, Glass and Mirrors.
4. Install the front door seal trim. Refer to “Door Seal
Trim” in this section.

DOORS 9P–19
DAEWOO M-150 BL2
D109C600
Installation Procedure
1. Install the door lock cylinder with the clip.
2. Install the outside door handle. Refer to “Outside
Front Door Handle” in this section.
3. Connect the negative battery cable.
D109C601
MANUAL WINDOW REGULATOR
Removal Procedure
1. Remove the glass. Refer to Section 9L, Glass and
Mirrors.
2. Remove the window regulator.

Remove the screws (1).

Remove the regulator (2).
D109C602
Installation Procedure
1. Install the regulator with the screws.
2. Install the glass. Refer to Section 9L, Glass and Mir-
rors.
D109C603
POWER FRONT WINDOW
REGULATOR
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the glass. Refer to Section 9L, Glass and
Mirrors.
3. Remove the window regulator assembly.

Disconnect the window motor electrical connector
(1).

Remove the screws (2).

Remove the window regulator assembly (3).