boot DAEWOO MATIZ 2003 Service Owner's Guide

INTERIOR TRIM 9G–15
DAEWOO M-150 BL2
D19E573A
FLOOR CONSOLE
Removal Procedure
1. Remove the floor console screws.
D19E575A
2. Remove the gear shift lever boot cover and the floor
console.

Remove the gear shift lever boot cover (1).

Remove the screws (2).

Remove the floor console (3).
D19E576A
Installation Procedure
1. Install the floor console.
2. Install the gear shift lever boot cover to the floor con-
sole.
3. Tighten the floor console screws.
D109E577
PARKING BRAKE CABLE COVER
Removal Procedure
1. Remove the parking brake cable cover.

Remove the screw (1).

Remove the cable cover (2).

9K – 2 SQUEAKS AND RATTLES
DAEWOO M-150 BL2
SQUEAK AND RATTLE DIAGNOSIS (Cont’d)
ConditionProbable CauseCorrection
Squeak Coming From
Console When Shifting
Manual Transaxle
(Condition Occurs In
Cold Weather with a
Cold Engine)
The faulty manual transaxle
control lever lower boot.
Move the control lever between gears and
listen for squeaks.

Remove the floor console and replace the
lower shift boot or apply talcum powder to
the lower shift boot.
Squeak Coming From
Instrument Cluster Trim
Plate
Rubbing of the cluster trim plate
on the instrument panel.
Test drive the vehicle in order to verify this
condition.

Remove the instrument cluster trim plate and
install felt tape to the edges.