garage door opener DODGE AVENGER 2009 2.G Owners Manual
[x] Cancel search | Manufacturer: DODGE, Model Year: 2009, Model line: AVENGER, Model: DODGE AVENGER 2009 2.GPages: 473, PDF Size: 7.39 MB
Page 22 of 473
NOTE:
•During the 16 second arming period, if a door is
opened or the ignition switch is turned ON, the system
will automatically disarm.
•Once armed, the Vehicle Security Alarm system dis-
ables the unlock switch on the driver door trim panel
and passenger door trim panel, the trunk release
button on the instrument panel, and the HomeLink/
Garage Door Opener (if equipped).
To Disarm The System
Either press the UNLOCK button on the RKE transmitter
or insert a valid Sentry Keyinto the ignition lock
cylinder and turn the key to the ON/START position.
NOTE:
•The driver’s door key cylinder and the trunk button on
the RKE transmitter cannot arm or disarm the system.
•The system remains armed during trunk entry. Press-
ing the trunk button will not disarm the system. If
someone enters the vehicle through the trunk and
opens any door, the alarm will sound.
The Vehicle Security Alarm system is designed to protect
your vehicle; however, you can create conditions where
the system will give you a false alarm. If one of the
previously described arming sequences has occurred, the
system will arm regardless of whether you are in the
vehicle or not. If you remain in the vehicle and open a
door, the alarm will sound. If this occurs, disarm the
system.
If the Vehicle Security Alarm system is armed and the
battery becomes disconnected the system will remain
armed when the battery is reconnected. The exterior
lights will flash, and the horn will sound. If this occurs,
disarm the system.
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Page 87 of 473
Windshield Wipers And Washers........... 140
▫Intermittent Wiper System.............. 141
▫Mist Feature........................ 142
▫Headlights With Wipers Feature (Available
With Auto Headlights Only)............. 142
▫Windshield Washers................... 142
Tilt/Telescoping Steering Column.......... 143
Electronic Speed Control — If Equipped...... 144
▫To Activate......................... 145
▫To Set At A Desired Speed.............. 145
▫To Deactivate....................... 145
▫To Resume Speed.................... 146
▫To Vary The Speed Setting.............. 146▫To Accelerate For Passing............... 147
Garage Door Opener — If Equipped........ 147
▫Programming HomeLink.............. 148
▫Gate Operator/Canadian Programming..... 151
▫Security........................... 152
▫Troubleshooting Tips.................. 152
▫General Information................... 153
Power Sunroof — If Equipped............. 153
▫Sunroof Operation.................... 154
▫Auto Sunroof Express With Anti-Pinch
Protection — If Equipped............... 155
▫Sunshade Operation................... 155
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 85
3
Page 149 of 473
To Accelerate For Passing
Depress the accelerator as you would normally. When the
pedal is released, the vehicle will return to the set speed.
Using Electronic Speed Control On Hills
NOTE:The Electronic Speed Control system maintains
speed up and down hills. A slight speed change on
moderate hills is normal.
On steep hills, a greater speed loss or gain may occur so
it may be preferable to drive without Electronic Speed
Control.
GARAGE DOOR OPENER — IF EQUIPPED
HomeLinkreplaces up to three remote controls (hand-
held transmitters) that operate devices such as garage
door openers, motorized gates, lighting, or home security
systems. The HomeLinkunit operates off your vehicle’s
battery.The HomeLinkbuttons that are located in the headliner
or sun visor designate the three different HomeLink
channels.
NOTE:HomeLinkis disabled when the Vehicle Secu-
rity Alarm is active.
HomeLinkButtons
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147
3
Page 150 of 473
WARNING!
•Your motorized door or gate will open and close
while you are training the universal transceiver.
Do not train the transceiver if people or pets are in
the path of the door or gate. Only use this trans-
ceiver with a garage door opener that has a “stop
and reverse” feature as required by Federal safety
standards. This includes most garage door opener
models manufactured after 1982. Do not use a
garage door opener without these safety features.
Call toll-free 1–800–355–3515 or, on the Internet at
www.HomeLink.com for safety information or as-
sistance.
•Vehicle exhaust contains carbon monoxide, a dan-
gerous gas. Do not run your vehicle in the garage
while training the transceiver. Exhaust gas can
cause serious injury or death.
Programming Homelink
Before You Begin
If you have not trained any of the HomeLinkbuttons,
erase all channels before you begin training.
To do this, press and hold the two outside buttons for up
to 20 seconds until the red indicator flashes.
It is recommended that a new battery be placed in the
handheld transmitter of the device being programmed to
HomeLinkfor more efficient training and accurate
transmission of the radio-frequency signal.
Your vehicle should be parked outside of the garage
when programming.
Begin Programming
1. Turn the ignition switch to the ON/RUN position.
2. Hold the battery side of the handheld transmitter
away from the HomeLinkbutton you wish to program.
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Page 151 of 473
Place the handheld transmitter 1 to 3 in (3 to 8 cm) away
from the HomeLinkbutton you wish to program while
keeping the indicator light in view.
3. Simultaneously press and hold both the chosen
HomeLinkbutton and the handheld transmitter button
until the HomeLinkindicator changes from a slow to a
rapidly blinking light, then release both the HomeLink
and handheld transmitter buttons.
Watch for the HomeLinkindicator to change flash rates.
When it changes, it is programmed. It may take up to
30 seconds, or longer in rare cases. The garage door may
open and close while you train.
NOTE:
•Some gate operators and garage door openers may
require you to replace Step 3 with procedures noted in
the “Gate Operator/Canadian Programming” section.
•After training a HomeLinkchannel, if the garage
door does not operate with HomeLinkand the ga-
rage door opener was manufactured after 1995, the
garage door opener may have a rolling code. If so,
proceed to Step 5 “Programming A Rolling Code
System.”
4. Press and hold the just-trained HomeLinkbutton
and observe the indicator light.
If the indicator light stays on constantly, programming is
complete and the garage door (or device) should activate
when the HomeLinkbutton is pressed.
If the indicator light blinks rapidly for two seconds and
then turns to a constant light, proceed to Step 5 “Pro-
gramming A Rolling Code System.”
5.Programming A Rolling Code System
At the garage door opener motor (in the garage), locate
the “Learn” or “Training” button.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149
3
Page 152 of 473
This can usually be found where the hanging antenna
wire is attached to the garage door opener motor. It is
NOT the button normally used to open and close the
door.6. Firmly press and release the “Learn” or “Training”
button. The name and color of the button may vary by
manufacturer.
NOTE:There are 30 seconds in which to initiate the next
step after the “Learn” button has been pressed.
7. Return to the vehicle and press the programmed
HomeLinkbutton twice (holding the button for two
seconds each time). If the device is plugged in and
activates, programming is complete.
If the device does not activate, press the button a third
time (for two seconds) to complete the training.
If you have any problems, or require assistance, please
call toll-free 1–800–355–3515 or, on the Internet at
www.HomeLink.com for information or assistance.
To program the remaining two HomeLinkbuttons,
repeat each step for each remaining button. DO NOT
erase the channels.
Training The Garage Door Opener
1 — Door Opener
2 — Training Button 150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Page 153 of 473
Using HomeLink
To operate, simply press and release the programmed
HomeLinkbutton. Activation will now occur for the
trained device (i.e., garage door opener, gate operator,
security system, entry door lock, home/office lighting,
etc. The handheld transmitter of the device may also be
used at any time.
Reprogramming a Single HomelinkButton
To reprogram a channel that has been previously trained,
follow these steps:
1. Turn the ignition switch to the ON/RUN position.
2. Press and hold the desired HomeLinkbutton until
the indicator light begins to flash after 20 seconds.Do not
release the button.
3.Without releasing the button,proceed with Program-
ming HomelinkStep 2 and follow all remaining steps.
Gate Operator/Canadian Programming
Canadian radio frequency laws require transmitter sig-
nals to time-out (or quit) after several seconds of trans-
mission – which may not be long enough for HomeLink
to pick up the signal during programming. Similar to this
Canadian law, some U.S. gate operators are designed to
time-out in the same manner.
It may be helpful to unplug the device during the cycling
process to prevent possible overheating of the garage
door or gate motor.
If you are having difficulties programming a garage door
opener or a gate operator, replace “Programming
HomeLink” Step 3, with the following:
3. Continue to press and hold the HomeLinkbutton
while you press and release - every two seconds
(“cycle”) your handheld transmitter until HomeLink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151
3
Page 154 of 473
has successfully accepted the frequency signal. The
indicator light will flash slowly and then rapidly when
fully trained.
If you unplugged the device for training, plug it back in
at this time.
Then proceed with Step 4 under “Programming
HomeLink,” earlier in this section.
Security
It is advised to erase all channels before you sell or turn
in your vehicle.
To do this, press and hold the two outside buttons for
20 seconds until the red indicator flashes. Note that all
channels will be erased. Individual channels cannot be
erased.
The HomeLinkUniversal Transceiver is disabled when
the Vehicle Security Alarm is active.
Troubleshooting Tips
If you are having trouble programming HomeLink, here
are some of the most common solutions:
•Replace the battery in the original transmitter.
•Press the “Learn” button on the Garage Door Opener
to complete the training for a Rolling Code.
•Did you unplug the device for training, and remember
to plug it back in?
If you have any problems, or require assistance, please
call toll-free 1–800–355–3515 or, on the Internet at
www.HomeLink.com for information or assistance.
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Page 456 of 473
Door Locks, Automatic.................... 32
Door Opener, Garage..................... 147
Driving
On Slippery Surfaces.................... 278
Through Flowing, Rising, or Shallow
Standing Water......................... 279
DVD Player (Video Entertainment System™).... 244
E-85 Fuel............................. 328
Electric Rear Window Defrost............... 167
Electric Remote Mirrors.................... 89
Electrical Power Outlets................... 156
Electronic Speed Control (Cruise Control)...... 144
Electronic Stability Program (ESP)............ 291
Electronic Vehicle Information Center (EVIC).... 189
Emergency, In Case of
Jacking............................. 350
Jump Starting......................... 358
Towing............................. 362Emergency Trunk Release.................39,40
Emission Control System Maintenance......371,422
Engine..........................367,368,369
Air Cleaner.......................... 377
Block Heater......................... 269
Break-In Recommendations................ 79
Checking Oil Level..................... 373
Coolant (Antifreeze).................385,418
Cooling............................. 385
Exhaust Gas Caution.................... 327
Fuel Requirements..................323,417
Jump Starting......................... 358
Oil ...........................373,417,418
Oil Change Interval............181,191,374,422
Oil Filler Cap.................367,368,369,375
Oil Filter............................ 377
Oil Filter Disposal...................... 376
Oil Selection.......................375,417
Oil Synthetic......................... 376
454 INDEX
Page 458 of 473
Cooling System....................... 385
Engine Oil........................... 373
Power Steering.....................282,419
Fluids................................ 418
Fluids, Lubricants and Genuine Parts.......... 418
Fog Lights.......................137,183,412
Folding Rear Seat.....................131,132
Freeing A Stuck Vehicle................... 361
Fuel................................. 323
Adding............................. 331
Additives............................ 326
Clean Air............................ 324
Ethanol............................. 324
Filler Cap (Gas Cap).................177,331
Filler Door (Gas Cap)................... 177
Gasoline............................ 323
Gauge.............................. 177
Light............................... 178
Materials Added....................... 326Methanol............................ 324
Octane Rating......................323,418
Requirements......................323,417
Tank Capacity........................ 417
Fuel, Flexible.............See Flexible Fuel Vehicles
Fuel System Caution..................... 333
Fueling............................... 331
Fuses................................ 400
Garage Door Opener (HomeLink) ........... 147
Gas Cap (Fuel Filler Cap)............331,334,370
Gasoline, Clean Air...................... 324
Gasoline (Fuel)......................... 323
Gasoline, Reformulated................... 324
Gauges
Coolant Temperature.................... 177
Fuel................................ 177
Odometer........................... 180
Tachometer.......................... 179
456 INDEX