bluetooth DODGE CHALLENGER 2016 3.G User Guide

Voice Texting (8.4A/8.4AN)
1. To send a message, push the Phone button. After
the beep, say the following command: “Send mes-
sage to John Smith.”
2. Listen to the prompt. After the beep, dictate the
message you would like to send. Wait for Uconnect to
process your message.
3. The Uconnect system will repeat your message and provide a variety of options to add to, delete, send or
hear the message again. After the beep, tell Uconnect
what you’d like to do. For instance, if you’re happy
with your message, after the beep, say: “Send.”
You must be registered with Uconnect Access and have a
compatible MAP – enabled smartphone to use your voice
to send a personalized text message. For details about
MAP, visit UconnectPhone.com. Apple iPhone iOS6 or later supports reading
incoming
text messages only. To enable this feature on your Apple
iPhone, follow these 4 simple steps:
iPhone Notification Settings1 — Select “Settings”
2 — Select “Bluetooth”
3 — Select the (i) for the paired vehicle
4 — Turn on “Show Notifications”
370 UNDERSTANDING YOUR INSTRUMENT PANEL

Do Not Disturb
With Do Not Disturb, you can disable notifications from
incoming calls and texts, allowing you to keep your eyes
on the road and hands on the wheel. For your conve-
nience there is a counter display to keep track of your
missed calls and text messages while you were using Do
Not Disturb.
Do Not Disturb can automatically reply with a text
message, a call or both, when declining an incoming call
and send it to voicemail.
Automatic reply messages can be:
•“I am driving right now, I will get back to you shortly.”
• Create a custom auto reply message up to 160 charac-
ters.
NOTE: Only the first 25 characters can been seen on the
touchscreen while typing a custom message. While in Do Not Disturb, Conference Call can be selected
so you can still place a second call without being inter-
rupted by incoming calls.
NOTE:
•
Reply with text message is not compatible with iP-
hones.
• Auto reply with text message is only available on
phones that supporting Bluetooth MAP.
General Information
This device complies with FCC rules Part 15 and Industry
Canada RSS-210. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference that may be received including interference that may cause unde-
sired operation.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 373

Passing............................. .145
Switch .............................. .139
Time Delay ........................... .142
Washers ............................. .546
Headlight Washers ....................... .546
Head Restraints ...................... .133, 134
Head Rests ......................... .133, 134
Heated Mirrors ...........................115
Heater, Engine Block ...................... .387
High Beam/Low Beam Select (Dimmer) Switch . . . .145
Hill Start Assist .......................... .417
Hitches Trailer Towing ........................ .474
HomeLink (Garage Door Opener) ..............199
Hood Release ........................... .137
Ignition Key..................................12
Illuminated Entry ..........................22 Immobilizer (Sentry Key)
....................17
Information Center, Vehicle ..................257
Inside Rearview Mirror .....................107
Instrument Cluster ...........225, 228, 236, 238, 254
Instrument Panel And Controls ...............224
Instrument Panel Lens Cleaning ...............565
Interior Appearance Care ....................563
Interior Lights .......................... .146
Intermittent Wipers (Delay Wipers) .............149
Introduction ..............................4
iPod Control ............................ .335
iPod/USB/MP3 Control ....................335
Bluetooth Streaming Audio ................335
Jacking Instructions ....................... .504
Jack Location ........................... .501
Jack Operation ....................... .501, 504
Jump Starting ........................ .510, 512
634 INDEX