driver seat adjustment DODGE CHARGER 2006 6.G Owners Manual

The infrared sensor independently measures the surface
temperature of the driver and passenger. Based on the
sensor input, the system automatically adjusts the air
flow temperature, the air flow volume, and amount of
outside air recirculation. This maintains a comfortable
temperature even under changing conditions.
Operation of the system is quite simple. Begin by turning
the right mode knob to AUTO, and place the blower
control (left knob) to either LO AUTO or HI AUTO. The LO
AUTO position should be used for front seat occupantsonly. The HI AUTO position should be used when more air
flow is desired, or when rear seat occupants are present.
Dial in the temperature you would like the system to
maintain by rotating the driver’s or passenger’s control
knob. Once the comfort level is selected the system will
maintain that level automatically using the heating system.
Should the desired comfort level require air conditioning,
the system will automatically make the adjustment.
You will experience the greatest efficiency by simply
allowing the system to function automatically. Selecting
the OFF position on the fan control stops the system
completely and closes the outside air intake.
72°F (22°C) is the recommended setting for maximum
comfort for the average person, however, this may vary.
NOTE:The temperature setting can be adjusted at any
time without affecting automatic control operation.
The air conditioning in this system is automatic.
Pressing this button while in AUTO mode will
cause the LED to flash three times and remain off.
This indicates that the system is in AUTO and requesting
the air conditioning is not necessary.
Automatic Temperature Controls
UNDERSTANDING YOUR INSTRUMENT PANEL 185
4