roof rack DODGE CHARGER 2018 Vehicle Warranty

Temporary Spares
MICHELIN® temporary spare tires are covered by this warranty for
6 years from the date of purchase or until the first 2/32 nds of an inch
(1.6 mm) of the original tread is worn off. Date of purchase is docu-
mented by new vehicle registration or tire sales invoice. If no proof of
purchase is available, coverage will be based on date of manufacture. At
that time, all warranties, express or implied, expire.
WHAT IS NOT COVERED
Tires which become unserviceable due to:
•Road hazard injury (e.g., a cut, snag, bruise, impact damage or
puncture);
•Incorrect mounting of the tire, tire/wheel imbalance or improper
repair;
•Misapplication, improper maintenance, racing, underinflation, overin-
flation or other abuse;
•Uneven or rapid wear which is caused by mechanical irregularity in
the vehicle such as wheel misalignment, (a measured tread difference
of 2/32 nds of an inch (1.6 mm) or more across the tread on the same
tire);
•Accident, fire, chemical corrosion, tire alteration, or vandalism;
•Use in commercial applications for tread wear; by this warranty for
6 years;
•Flat spotting caused by improper storage or brake lock;
•The addition of liquid, solid or gaseous materials other than air,
nitrogen or carbon dioxide (for example, waterbase sealers or balanc-
ing substances);
•Cosmetic ozone or weather cracking;
•Use of MICHELIN Self-Supporting Zero Pressure (AP) tires without a
properly operating low air pressure warning system.
MICHELIN
162

•Tires improperly repaired or with repairs not conforming to Tire and
Rubber Association of Canada standards, or with section repairs, or
with a self-vulcanizing plug only or patch only.
•Tires which have been recapped, or retreaded, or regrooved.
•Tires used in racing or other competitive events.
•Tires removed in multiples when only one tire can be claimed, or is
suspect of a claim.
•Ride related anomalies after the first 2/32” of treadwear.
•Tires which become unserviceable because of tire operation in excess of
tire/wheel manufacturers’ specifications and recommendations, in-
cluding spinning.
•Tires which become unserviceable because of a mechanical irregularity
in the vehicle such as misalignment, defective brakes, defective shock
absorbers or struts, or improper rims.
•Tires damaged by fire, chemical corrosion, vandalism, wrecks, chains,
theft, run while flat, under inflated, over inflated or abused during
servicing.
•Tires affected by flat spotting caused by improper transport or storage.
•Tires which became unserviceable because of road hazard injuries (e.g.,
nails, glass, metal objects) or other penetrations or snags, bruises or
impact damage, except for those Run Flat lines/sizes specifically
covered by the Pirelli Road Hazard Policy.
•Tires with weather / ozone cracking which were purchased more than
four years prior to presentation for adjustment. (If no proof of
purchase date is available, the warranty will be four years from the
DOT date).
•Summer tires that developed surface cracks due to use in low ambient
temperatures. These include P Zero Silver, P Zero Trofeo, P Zero Corsa
System, P Zero, P Zero Rosso™, P Zero Nero, Cinturato P1, Cinturato
P7, Scorpion Zero™ and Scorpion Verde.
PIRELLI TIRES
203

12. Storage
Should you need to store tires after removal from a vehicle (as in the case
of winter tires), they should be stored in a cool, dry place. To protect your
tires from damage related to: heat, water, ozone and direct sunlight, it is
suggested you place them in opaque, waterproof containers (e.g., plastic
trash bags).
13. Tubes in Tubeless Tires
Under no circumstances are tubes to be used in Pirelli tires marked
“Tubeless”. This includes tires that have been repaired. If the tire’s
pressure retention ability has been affected, so as to necessitate a tube
being installed, the tire must be replaced.
14. Tire Valves
Whenever new tires are installed on your wheels, new tire valves of the
correct type must be installed. During your routine tire inspection, verify
that all your valves have proper valve caps. Replace as necessary, since
the valve cap is also a seal against pressure loss.
15. Tire Demounting and Mounting
Tire fitting is best left to professionals who have the proper tools and
equipment to perform the task properly and safely. Your tires should be
mounted or demounted, using Tire and Rubber Association of Canada
procedures or the vehicle manufacturers’ recommendations. Your wheels
should be in good, clean condition. Wheels should be inspected for
distortion, dents, cracks, rust and foreign matter, and be replaced as
necessary. NEVER EXCEED 40 PSI WHEN SEATING BEADS.
PIRELLI TIRES
214