tire size DODGE CHARGER 2021 Vehicle Warranty
[x] Cancel search | Manufacturer: DODGE, Model Year: 2021, Model line: CHARGER, Model: DODGE CHARGER 2021Pages: 262, PDF Size: 10.42 MB
Page 3 of 262
TIRES
2
TIRES
Tire Safety Information
Tire safety information will cover aspects of the following
in
formation: Tire Markings, Tire Identification Numbers, Tire
Terminology and Definitions, Tire Pressures, and Tire Loading.
Tire Markings
Tire Markings
NOTE:
• P (Passenger) — Metric tire sizing is based on US design standards.
P-Metric tires have the letter “P” molded into the sidewall
preceding the size designation. Example: P215/65R15 95H.
• European — Metric tire sizing is based on European design stan -
d
ards. Tires designed to this standard have the tire size molded into
th
e sidewall beginning with the section width. The letter "P" is
absent from this tire size designation. Example: 215/65R15 96H.
1 — US DOT Safety Standards Code (TIN)
2 — Size Designation
3 — Service Description
4 — Maximum Load
5 — Maximum Pressure
6 — Treadwear, Traction and Temperature Grades
Page 4 of 262
TIRES
3
• LT (Light Truck) — Metric tire sizing is based on US design stan -
dards. The size designation for LT-Metric tires is the same as for
P-
Metric tires except for the letters “LT” that are molded into the
sidewall preceding the size designation. Example: LT235/85R16.
• Temporary spare tires are designed for temporary emergency use
o
nly. Temporary high pressure compact spare tires have the letter
“T” or “S” molded into the sidewall preceding the size designation.
Example: T145/80D18 103M.
• High flotation tire sizing is based on US design standards and it
b
egins with the tire diameter molded into the sidewall. Example:
31x10.5 R15 LT.
Tire Sizing Chart
EXAMPLE:
Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C,
T1
45/80D18 103M, 31x10.5 R15 LT
P = Passenger car tire size based on U.S. design standards, or
"....blank...." =
Passenger car tire based on European design standards, or
LT = Light Truck tire based on US design standards, or
T
or S = Temporary spare tire or
3
1 = Overall diameter in inches (in)
2
15, 235, 145 =
Section width in millimeters (mm)
65, 85, 80 = Aspect ratio in percent (%)
•
Ratio of section height to section width of tire, or
1
0.5 = Section width in inches (in)
R
= Construction code
• "R" means radial construction, or
•
"D" means diagonal or bias construction
1
5, 16, 18 = Rim diameter in inches (in)
S
ervice Description:
95 = Load Index
•
A numerical code associated with the maximum load a tire can carry
H
= Speed Symbol
• A symbol indicating the range of speeds at which a tire can carry a load corre -
s
ponding to its load index under certain operating conditions
• The maximum speed corresponding to the speed symbol should only be achieved
u
nder specified operating conditions (i.e., tire pressure, vehicle loading, road condi -
tions, and posted speed limits)
Page 5 of 262
TIRES
4
Tire Identification Number (TIN)
The TIN may be found on one or both sides of the tire; however, the
da
te code may only be on one side. Tires with white sidewalls will
have the full TIN, including the date code, located on the white
sidewall side of the tire. Look for the TIN on the outboard side of black
sidewall tires as mounted on the vehicle. If the TIN is not found on the
outboard side, then you will find it on the inboard side of the tire.
Load Identification:
Absence of the following load identification symbols on the sidewall of the tire
in dicates a Standard Load (SL) tire:
• XL
= Extra load (or reinforced) tire, or
•LL
= Light load tire or
•C, D, E, F, G
= Load range associated with the maximum load a tire can carry at a
specified pressure
Maximum Load –
Maximum load indicates the maximum load this tire is designed to
carry
Maximum Pressure –
Maximum pressure indicates the maximum permissible cold
tire inflation pressure for this tire
EXAMPLE:
DOT MA L9 ABCD 0301
DOT = Department of Transportation
•
This symbol certifies that the tire is in compliance with the US Department of Trans -
p
ortation tire safety standards and is approved for highway use
MA = Code representing the tire manufacturing location (two digits)
L
9 = Code representing the tire size (two digits)
A
BCD = Code used by the tire manufacturer (one to four digits)
0
3 = Number representing the week in which the tire was manufactured (two digits)
•
03
means the 3rd week
01 = Number representing the year in which the tire was manufactured (two digits)
•
01
means the year 2001
• Prior to July 2000, tire manufacturers were only required to have one number to
r
epresent the year in which the tire was manufactured. Example: 031 could repre -
sent the 3rd week of 1981 or 1991
EXAMPLE:
Page 6 of 262
TIRES
5
Tire Terminology And Definitions
Tire Loading And Tire Pressure
NOTE:
The proper cold tire inflation pressure is listed on the driver side
B-
pillar or the rear edge of the driver side door.
Term Definition
B-pillar The vehicle B-pillar is the structural member of the
bo
dy located behind the front door.
Cold Tire Inflation Pressure Cold tire inflation pressure is defined as the tire
pr
essure after the vehicle has not been driven for
at least three hours, or driven less than 1 mile
(1
.6 km) after sitting for a minimum of three hours.
In
flation pressure is measured in units of PSI
(pounds per square inch) or kPa (kilopascals).
Maximum Inflation Pressure The maximum inflation pressure is the maximum
pe
rmissible cold tire inflation pressure for this tire.
The maximum inflation pressure is molded into the
sidewall.
Recommended Cold Tire In
flation Pressure Vehicle manufacturer's recommended cold tire
in flation pressure as shown on the tire placard.
Tire Placard A label permanently attached to the vehicle
de
scribing the vehicle’s loading capacity, the
original equipment tire sizes and the
recommended cold tire inflation pressures.
Page 8 of 262
TIRES
7
Tire And Loading Information Placard
Tire And Loading Information Placard
This placard tells you important information about the:
• Number of people that can be carried in the vehicle.
•
Total weight your vehicle can carry.
•
Tire size designed for your vehicle.
•
Cold tire inflation pressures for the front, rear, and spare tires.
L
oading
The vehicle maximum load on the tire must not exceed the load
ca
rrying capacity of the tire on your vehicle. You will not exceed the
tire's load carrying capacity if you adhere to the loading conditions,
tire size, and cold tire inflation pressures specified on the Tire and
Loading Information placard in “Vehicle Loading” in the “Starting
And Operating” section of your Owner’s Manual.
NOTE:
Under a maximum loaded vehicle condition, Gross Axle Weight
Ra
tings (GAWRs) for the front and rear axles must not be exceeded.
For further information on GAWRs, vehicle loading, and trailer
to
wing, refer to “Vehicle Loading” in the “Starting And Operating”
section of your Owner’s Manual.
To determine the maximum loading conditions of your vehicle, locate
th
e statement “The combined weight of occupants and cargo should
Page 9 of 262
TIRES
8
never exceed XXX kg or XXX lbs” on the Tire and Loading Information
placard. The combined weight of occupants, cargo/luggage and
trailer tongue weight (if applicable) should never exceed the weight
referenced here.
Steps For Determining Correct Load Limit:
(1) Locate the statement “The combined weight of occupants and
ca
rgo should never exceed XXX kg or XXX lbs.” on your vehicle's
placard.
(2) Determine the combined weight of the driver and passengers that
wi
ll be riding in your vehicle.
(3) Subtract the combined weight of the driver and passengers from
XX
X kg or XXX lbs.
(4) The resulting figure equals the available amount of cargo and luggage
lo
ad capacity. For example, if “XXX” amount equals 1,400 lbs. and there
will be five 150 lb passengers in your vehicle, the amount of available
cargo and luggage load capacity is 650 lbs. (1,400-750 (5x150) = 650 lbs.)
(5) Determine the combined weight of luggage and cargo being loaded
on
the vehicle. That weight may not safely exceed the available cargo
and luggage load capacity calculated in Step 4.
(6) If your vehicle will be towing a trailer, load from your trailer will be
tr
ansferred to your vehicle. Consult this manual to determine how this
reduces the available cargo and luggage load capacity of your vehicle.
Metric Example For Load Limit
For example, if “XXX” amount equals 635 kg and there will be five 68 kg
pa
ssengers in your vehicle, the amount of available cargo and luggage
load capacity is 295 kg (635-340 (5x68) = 295 kg) as shown in step 4.
NOTE:
• If your vehicle will be towing a trailer, load from your trailer will be
transferred to your vehicle. The following table shows examples on
how to calculate total load, cargo/luggage, and towing capacities of
your vehicle with varying seating configurations and number and
size of occupants. This table is for illustration purposes only and
may not be accurate for the seating and load carrying capacity of
your vehicle.
• For the following example, the combined weight of occupants and
c
argo should never exceed 865 lbs (392 kg).
Page 14 of 262
TIRES
13
Tire Repair
If your tire becomes damaged, it may be repaired if it meets the
fo
llowing criteria:
• The tire has not been driven on when flat.
•
The damage is only on the tread section of your tire (sidewall
d
amage is not repairable).
• The puncture is no greater than a ¼ of an inch (6
mm).
Consult an authorized tire dealer for tire repairs and additional
in
formation.
Damaged Run Flat tires, or Run Flat tires that have experienced a loss
of
pressure should be replaced immediately with another Run Flat tire
of identical size and service description (Load Index and Speed
Symbol).
Run Flat Tires — If Equipped
Run Flat tires allow you the capability to drive 50 miles (80 km) at
50
mph (80 km/h) after a rapid loss of inflation pressure. This rapid
lo
ss of inflation is referred to as the Run Flat mode. A Run Flat mode
occurs when the tire inflation pressure is of/or below 14 psi (96 kPa).
Once a Run Flat tire reaches the run flat mode it has limited driving
capabilities and needs to be replaced immediately. A Run Flat tire is
not repairable.
It is not recommended to drive a vehicle loaded at full capacity or to
to
w a trailer while a tire is in the Run Flat mode.
See the Tire Pressure Monitoring System section for more information.
Tire Spinning
When stuck in mud, sand, snow, or ice conditions, do not spin your
ve
hicle's wheels above 30 mph (48 km/h) or for longer than 30 seconds
co
ntinuously without stopping.
Refer to “Freeing A Stuck Vehicle” in “In Case Of Emergency” in your
Ow
ner’s Manual for further information.
Page 16 of 262
TIRES
15
Life Of Tire
The service life of a tire is dependent upon varying factors including,
bu
t not limited to:
• Driving style.
•
Tire pressure - Improper cold tire inflation pressures can cause
u
neven wear patterns to develop across the tire tread. These
abnormal wear patterns will reduce tread life, resulting in the need
for earlier tire replacement.
• Distance driven.
•
Performance tires, tires with a speed rating of V or higher, and
S
ummer tires typically have a reduced tread life. Rotation of these
tires per the vehicle scheduled maintenance is highly recom -
mended.
Keep dismounted tires in a cool, dry place with as little exposure to
l i
ght as possible. Protect tires from contact with oil, grease, and
gasoline.
Replacement Tires
The tires on your new vehicle provide a balance of many
ch
aracteristics. They should be inspected regularly for wear and
correct cold tire inflation pressures. FCA US LLC strongly
recommends that you use tires equivalent to the originals in size,
quality and performance when replacement is needed. Refer to the
paragraph on “Tread Wear Indicators” in this section. Refer to the Tire
and Loading Information placard or the Vehicle Certification Label for
the size designation of your tire. The Load Index and Speed Symbol
for your tire will be found on the original equipment tire sidewall.
See the Tire Sizing Chart example found in the “Tire Safety
In
formation” section of this manual for more information relating to
the Load Index and Speed Symbol of a tire.
WARNING!
Tires and the spare tire should be replaced after six years,
re
gardless of the remaining tread. Failure to follow this warning
can result in sudden tire failure. You could lose control and have a
collision resulting in serious injury or death.
Page 17 of 262
TIRES
16
It is recommended to replace the two front tires or two rear tires as a
pair. Replacing just one tire can seriously affect your vehicle’s
handling. If you ever replace a wheel, make sure that the wheel’s
specifications match those of the original wheels.
It is recommended you contact an authorized tire dealer or original
eq
uipment dealer with any questions you may have on tire
specifications or capability. Failure to use equivalent replacement tires
may adversely affect the safety, handling, and ride of your vehicle.
WARNING!
• Do not use a tire, wheel size, load rating, or speed rating other
t
han that specified for your vehicle. Some combinations of unap -
proved tires and wheels may change suspension dimensions and
pe
rformance characteristics, resulting in changes to steering,
handling, and braking of your vehicle. This can cause unpredict -
able handling and stress to steering and suspension compo -
nents. You could lose control and have a collision resulting in
se
rious injury or death. Use only the tire and wheel sizes with
load ratings approved for your vehicle.
• Never use a tire with a smaller load index or capacity, other than
w
hat was originally equipped on your vehicle. Using a tire with
a smaller load index could result in tire overloading and failure.
You could lose control and have a collision.
• Failure to equip your vehicle with tires having adequate speed
c
apability can result in sudden tire failure and loss of vehicle
control.
CAUTION!
Replacing original tires with tires of a different size may result in
fa
lse speedometer and odometer readings.
Page 18 of 262
TIRES
17
Tire Types
All Season Tires — If Equipped
All season tires provide traction for all seasons (Spring, Summer,
Au
tumn, and Winter). Traction levels may vary between different all
season tires. All season tires can be identified by the M+S, M&S, M/S
or MS designation on the tire sidewall. Use all season tires only in sets
of four; failure to do so may adversely affect the safety and handling
of your vehicle.
Summer Or Three Season Tires — If Equipped
Summer tires provide traction in both wet and dry conditions, and are
no
t intended to be driven in snow or on ice. If your vehicle is equipped
with summer tires, be aware these tires are not designed for winter or
cold driving conditions. Install winter tires on your vehicle when
ambient temperatures are less than 40°F (5°C) or if roads are covered
with ice or snow. For more information, contact an authorized dealer.
Summer tires do not contain the all season designation or mountain/
sn
owflake symbol on the tire sidewall. Use summer tires only in sets
of four; failure to do so may adversely affect the safety and handling
of your vehicle.
Snow Tires
Some areas of the country require the use of snow tires during the
w i
nter. Snow tires can be identified by a “mountain/snowflake”
symbol on the tire sidewall.
If you need snow tires, select tires equivalent in size and
type to the original equipment tires. Use snow tires only
in
sets of four; failure to do so may adversely affect the
safety and handling of your vehicle.
Snow tires generally have lower speed ratings than
wh
at was originally equipped with your vehicle and
should not be operated at sustained speeds over 75 mph (120 km/h).
WARNING!
Do not use Summer tires in snow/ice conditions. You could lose
ve
hicle control, resulting in severe injury or death. Driving too
fast for conditions also creates the possibility of loss of vehicle
control.