clock DODGE CHARGER SRT 2010 7.G User Guide

DODGE CHARGER SRT 2010 7.G User Guide CHARGER SRT 2010 7.G DODGE DODGE https://www.carmanualsonline.info/img/12/5565/w960_5565-0.png DODGE CHARGER SRT 2010 7.G User Guide

Page 218 of 432

DODGE CHARGER SRT 2010 7.G User Guide Play Mode
When switched to UCI mode, the iPodautomatically
starts Play mode. In Play mode, you may use the
following buttons on the radio faceplate to control the
iPod and display data:
•Use the T

Page 219 of 432

DODGE CHARGER SRT 2010 7.G User Guide •While a track is playing, press theINFObutton to see
the associated metadata (artist, track title, album, etc.)
for that track. Pressing the INFObutton again jumps
to the next screen of data for th

Page 220 of 432

DODGE CHARGER SRT 2010 7.G User Guide •During all List modes, the iPoddisplays all lists in
“wrap-around” mode. So if the track is at the
bottom of the list, just turn the wheel backwards
(counter-clockwise) to get to the track fas

Page 224 of 432

DODGE CHARGER SRT 2010 7.G User Guide INFO Button
Pressing the INFO button will cycle the display informa-
tion between Artist, Song Title, and Composer (if avail-
able). Also, pressing and holding the INFO button for an
additional three

Page 229 of 432

DODGE CHARGER SRT 2010 7.G User Guide Audio/Video RCA Jacks (AUX Jacks)
on the rear of the center console enable
the monitor to display video directly
from a video camera, connect video
games for display on the screen, or
play music direc

Page 374 of 432

DODGE CHARGER SRT 2010 7.G User Guide BULB REPLACEMENT
Low Beam Headlamp, High Beam Headlamp,
Park/Turn Lamp, and Front Side Marker Lamp —
Models with Halogen Headlamps
1. Open the hood.
NOTE:Removal of the air cleaner filter housing ma

Page 377 of 432

DODGE CHARGER SRT 2010 7.G User Guide 2. Remove two fasteners from the back of the taillamp
assembly.
3. Pull back the trunk liner.
4. Remove the remaining fastener from the back of the
taillamp assembly.
5. Push the electrical connector

Page 379 of 432

DODGE CHARGER SRT 2010 7.G User Guide 9. Disconnect the bulb from the socket assembly and
install the replacement bulb.
10. Reinstall the bulb and socket assembly into the
taillamp assembly, and then turn it clockwise.
3 — Tail/Turn Lam

Page 415 of 432

DODGE CHARGER SRT 2010 7.G User Guide Brightness, Interior Lights.................. 131
Bulb Replacement ..................... 372,373
Bulbs, Light .......................... 75,372
Calibration, Compass ..................... 184
Capacitie

Page 428 of 432

DODGE CHARGER SRT 2010 7.G User Guide Setting the Clock................ 191,192,196,205
Settings, Personal ........................ 187
Shifting ............................... 246
Automatic Transmission ..............246,250
Shoulder Bel
Page:   < prev 1-10 11-20