maintenance DODGE DURANGO 1998 1.G Workshop Manual

DODGE DURANGO 1998 1.G Workshop Manual DURANGO 1998 1.G DODGE DODGE https://www.carmanualsonline.info/img/12/5703/w960_5703-0.png DODGE DURANGO 1998 1.G Workshop Manual

Page 7 of 193

DODGE DURANGO 1998 1.G Workshop Manual Downloaded from www.Manualslib.com manuals search engine OIL PAN
DESCRIPTION
The engine oil pan is made of laminated steel and
has a single plane sealing surface. The sandwich
style oil pan gasket has

Page 10 of 193

DODGE DURANGO 1998 1.G Workshop Manual Downloaded from www.Manualslib.com manuals search engine SERVICE DIAGNOSISÐMECHANICAL
CONDITION POSSIBLE CAUSES CORRECTIONS
NOISY VALVES 1. High or low oil level in
crankcase.1. Refer to Group 0, Lub

Page 17 of 193

DODGE DURANGO 1998 1.G Workshop Manual Downloaded from www.Manualslib.com manuals search engine CRANKCASE OIL LEVEL INSPECTION
CAUTION: Do not overfill crankcase with engine oil,
pressure loss or oil foaming can result.
Inspect engine oil

Page 92 of 193

DODGE DURANGO 1998 1.G Workshop Manual Downloaded from www.Manualslib.com manuals search engine Scrape or wire brush all gasket surfaces to remove
all loose material. Inspect stamped parts to ensure
gasket rails are flat. Flatten rails wit

Page 93 of 193

DODGE DURANGO 1998 1.G Workshop Manual Downloaded from www.Manualslib.com manuals search engine particular ambient temperature range and variation
(Fig. 12).
ENERGY CONSERVING OIL
An Energy Conserving type oil is recommended for
gasoline e

Page 142 of 193

DODGE DURANGO 1998 1.G Workshop Manual Downloaded from www.Manualslib.com manuals search engine CRANKSHAFT MAIN BEARINGS
DESCRIPTION
Main bearings are located in the cylinder block.
One half of the main bearing is located in the crank-
sha

Page 145 of 193

DODGE DURANGO 1998 1.G Workshop Manual Downloaded from www.Manualslib.com manuals search engine CONDITION POSSIBLE CAUSES CORRECTION
CONNECTING
ROD NOISE1. Insufficient oil supply 1. Check engine oil level. (Refer to group 0, Lubrication a

Page 151 of 193

DODGE DURANGO 1998 1.G Workshop Manual Downloaded from www.Manualslib.com manuals search engine (2) Check intake manifold bolt torque.
(3) Perform cylinder compression test. Refer to
Cylinder Compression Pressure Test in the Engine
Diagnos

Page 152 of 193

DODGE DURANGO 1998 1.G Workshop Manual Downloaded from www.Manualslib.com manuals search engine (2) With engine OFF, allow approximately ten min-
utes for oil to settle to bottom of crankcase, remove
engine oil dipstick.
(3) Wipe dipstick