Heater core DODGE DURANGO 1999 1.G Workshop Manual

DODGE DURANGO 1999 1.G Workshop Manual DURANGO 1999 1.G DODGE DODGE https://www.carmanualsonline.info/img/12/5703/w960_5703-0.png DODGE DURANGO 1999 1.G Workshop Manual

Page 31 of 193

DODGE DURANGO 1999 1.G Workshop Manual Downloaded from www.Manualslib.com manuals search engine ENGINE ASSEMBLY
REMOVAL
NOTE: This procedure applies to both the 4X2 and
4X4 vehicles, steps that apply to the 4X4 vehicle
only, are identified

Page 33 of 193

DODGE DURANGO 1999 1.G Workshop Manual Downloaded from www.Manualslib.com manuals search engine (2)4X4 vehiclesInstall locknuts onto the engine
mount brackets. Tighten locknuts to 41 N´m (30 ft.
lbs.).
(3) Remove jack from under the trans

Page 35 of 193

DODGE DURANGO 1999 1.G Workshop Manual Downloaded from www.Manualslib.com manuals search engine INTAKE MANIFOLD
REMOVAL
(1) Disconnect negative cable from battery.
(2) Remove resonator assembly and air inlet hose.
(3) Disconnect throttle a

Page 36 of 193

DODGE DURANGO 1999 1.G Workshop Manual Downloaded from www.Manualslib.com manuals search engine (10) Position and install heater hoses and tubes
onto intake manifold.
(11) Install the heater hoses to the heater core and
engine front cover.